Availability
Showing In Stock Items. Show All 17 Items.
AP Exhaust Y-pipes are direct-fit OE replacements. They are made from aluminized heavy-gauge steel with re-aluminized weld seams to prevent corrosion. Make repairs to your exhaust system with AP Exhaust Y-pipes.
( 13 )
$251.99
Steeda Mustang 5.0L Coyote 304 stainless resonator delete crossover pipes are the best way to improve sound and increase performance at minimal cost—while losing up to 6.5 lbs. of weight. Available in X-pipe and H-pipe models, the design increases torque at lower RPM and delivers a traditional mean, deep muscle car exhaust tone. The layout enables you to retain the factory heatshield found on 2018 and newer GT models—without cutting and expanding the crossover pipe to retain the OE shields or chiseling off the OE shields. With mandrel-bent 2.5 in. diameter tubing, these crossover pipes easily install between the factory catalytic converters and the factory mufflers. They're also compatible with virtually all aftermarket axle-back exhaust kits. The 304 stainless steel tubing will not develop surface rust typical with 409 stainless, nor rust completely through like aluminized mild steel. The flush-fit exhaust clamps allow for shortening the pipe, if needed, and prevent exhaust leaks common with expanded end kits.
( 14 )
$299.95
Gibson crossover pipes bolt directly to your vehicle's OEM manifolds, replacing the stock H-pipe and converters. These mandrel-bent pipes provide better noise cancellation and scavenging effect, producing increased horsepower and torque. They are for off-road and race use only. For better flow and go, buy Gibson crossover pipes.
( 1 )
$383.99
Get the most from your exhaust with JBA Performance Exhaust X, H, and Y-pipes. These system upgrades equalize the exhaust flow to enhance performance from your JBA headers. Some configurations include a catalytic converter. Choose the style and size to blend with your exhaust setup. X, H, and Y-pipes are ideal for direct replacement, racing, or off-road applications.
( 18 )
$318.80
—
$398.40
Borla X-pipes will not only increase the amount of power that your vehicle produces, but also give your muscle, sports, or luxury car a more aggressive sound. Crossover pipes let your exhaust gasses flow through the path of least resistance, balancing the pulses between engine banks—and achieving best performance gains in the higher rpm range. These X-pipes are built from lightweight, aircraft-grade T-304 stainless steel, and are available in various configurations and tubing diameters. They are a perfect complement to Borla's cat-back and header systems.
( 37 )
$515.99
—
$577.99
MBRP X-pipes fit your stock manifold with increased power and efficiency. They are made of stainless steel for lasting performance and are polished for lasting looks. MBRP X-pipes are fairly easy to install and are well worth the effort.
( 3 )
$279.99
—
$419.99
Ford Performance Parts X-pipes convert your factory H-pipe into a more efficient X-pipe. They require cutting the factory exhaust for installation, and clamp on with no welding required! Made of stainless steel, these pipes will give you years of great performance.
( 10 )
$279.99
MagnaFlow Tru-X pipe transitions are great for single/dual, dual/dual, and balanced tube applications. These stainless steel crossover pipes represent a significant leap forward in technology over traditional H-pipes. Their gentler radius allows for better exhaust gas scavenging, noise cancellation, and balance between cylinder banks. The results are a significant increase in power and torque but a reduction in dB sound levels--the best of both worlds.
( 49 )
$493.00
Modify your exhaust system for maximum flow and performance with Dynomax X-pipes. They're designed to fit with factory exhaust manifolds or aftermarket headers, and they install easily with some modifications. Dynomax X-pipes are available in stainless steel construction, or mild steel with an aluminum finish for protection against corrosion. Choose the style and pipe diameter to meet the needs of your vehicle.
( 12 )
$377.99
Free-flowing, mandrel-bent Pypes After-Cat X-pipes have reinforcing plates at critical locations and are available in 409 stainless steel or polished 304 stainless steel for years of high-powered performance. Since V8s fire unevenly, exhaust exits in pulses rather than in a steady flow. While one pipe is filled with pressure, the other pipe is relatively pressureless, but the connecting of the two pipes in a siamese pattern allows pressure to be released to the other side. This action allows the exhaust to pass through the pipe more quickly and the improved 'breathing' increases horsepower. Their high-quality, exceptionally versatile design and performance are a proven winner when it comes to bumping up the horsepower of your daily driver or race car. There's no skimping on materials here. All crossovers include dual 409 stainless reinforcement plates at the welds, where they are needed the most. All pipes are mandrel-bent, allowing for the maximum flow of exhaust gasses, which boosts acceleration. Fabricated using the highest quality materials, the smooth, seam-coated, mandrel-bent, 409 stainless steel pipe resists corrosion and extends the life of your system. The kits include the X-pipe with extended legs, cutout covers, cover hardware, and installation hardware.
( 4 )
$281.79
On Sale
Flowmaster Scavenger X-pipes provide gains in horsepower and torque without sacrificing the classic Flowmaster sound. These X-pipes feature Flowmaster's patented Scavenger D-port technology designed to create a larger surface area that actually pulls gasses along faster—delivering a significant torque improvement and maximize exhaust scavenging. The pipes are constructed from mandrel-bent stainless steel or aluminized steel and are offered in different diameters to help you find the one that will complement the rest of your exhaust system. Performance gains for your car or truck begin with Flowmaster Scavenger X-pipes. Features include: * Available in universal kits or for direct-fit applications * Dyno-tuned for maximum performance * Race-proven technology
( 7 )
$449.95
$399.95
—
$466.95
On Sale
Flowmaster Scavenger Series Y collectors provide a smooth transition when fabricating a custom single exhaust requiring a Y-connection. These steel or stainless slip-fit pipes are offered in various inlet and outlet diameters to fit your specific application. For exhaust performance you'll be pleased with, start with a Scavenger header collector from Flowmaster!
( 30 )
$399.95
$359.95
Free-up extra horsepower and get a more aggressive note with BBK after-cat X-pipes. These after-cat X-pipe attachments use free-flowing, 2 3/4 in. diameter, CNC mandrel-bent aluminized tubing with an X crossover pipe design to improve flow. These free-flowing X-pipes not only increase power, but they also add a crisp, raspy growl to the sound of your exhaust. BBK designed these after-cat X-pipes as mid-pipes to fit your application. They install by simply attaching them to an existing catalytic converter for an easy and street-legal installation.
Not Yet Reviewed
$299.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
