Availability
Showing In Stock Items. Show All 38 Items.
JBA Performance Exhaust competition-ready long tube headers are the number-one choice for maximum performance gains and high rpm efficiency. Their designs are dyno and race-proven to deliver the greatest possible increase in horsepower and torque throughout the rpm range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra-thick 3/8 in. one-piece flanges, and patented merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible so that lowered cars do not drag the collectors. And, in addition, each JBA system includes high-quality hardware and thorough instructions to provide a professional, no-leak installation.
( 97 )
$931.00
—
$1,039.75
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 703 )
$750.10
—
$985.65
Direct-fit BBK full-length headers will help your vehicle produce extra horsepower. Constructed from heavy 14-gauge, mandrel-bent tubing with 3/8 in. thick die-stamped flanges, these headers come in your choice of coated finishes. Gaskets and mounting hardware are included. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 107 )
$799.99
—
$849.99
Experience is in Doug's Headers DNA. They have been a respected name since the 1960s and remain one of today's most popular brands among muscle car enthusiasts who don't sacrifice quality and fit when it comes to their vehicle. Doug's stainless steel headers will give the greatest increases in horsepower and torque across the entire rpm spectrum, and they are meticulously designed to provide maximum power and the highest quality available. Available in many fitments, choose a set designed for your vehicle. Key features: * 304 stainless steel construction to prevent rust and corrosion * 3/8 in. thick machined flanges to prevent warping * Mandrel-bent tubes for an accurate fit and improved flow * Precision formed long transition collectors reduce backpressure * Header tubes have a natural stainless finish * Necessary mounting hardware, collector reducers or connector pipes, premium gaskets, and detailed installation instruction sheets are included
( 22 )
$980.85
—
$1,019.60
On Sale
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 404 )
$784.99
—
$879.99
Schumacher Creative Services Big Block Tri-Y under chassis headers give you high-flow header performance and a custom fit that means you don't have to sacrifice your power steering. They fit great with most aftermarket aluminum heads with angled plugs, retain exhaust studs in the heads, and they don't capture the starter. Specifically designed for your application, Schumacher Big Block Tri-Y under chassis headers install quickly and painlessly, works with manual or power steering and automatic transmissions, and are available in different finishes. Select the ones you prefer.
Not Yet Reviewed
$939.00
Increase your horsepower and torque with JBA Cat4ward headers! They are designed with 3/8 in. thick laser-cut flanges, mandrel-bent primary tubes, and feature JBA's patented Firecone merge collectors. They're available in either steel or 409 stainless steel and are offered in a chrome plated or high-temperature silver ceramic finish for most applications. JBA includes premium-quality mounting hardware and instructions for the installation and, unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This would include components such as cylinder heads, chassis, steering, motor mounts, body mounts, bushings, etc. If aftermarket components, parts from other applications, or custom-altered parts are used on your vehicle, it is the installer's responsibility to verify fitment.
( 511 )
$689.88
—
$860.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 941 )
$779.95
No gaskets, please! Sanderson headers provide the only leak-free flange design that works! Their patented headers stem from over 50 years of performance. And, like your special project that you've upgraded to be better than the original, Sanderson headers are well-crafted and unique to many types of engines for many types of cars—offering you the best fit for your swapped, modified, and accessorized hot rod. They're crafted from 16-gauge steel with precision, laser-cut, 3/8 in. thick flanges. A weld bead is built up and uniformly ground around exhaust ports and bolt holes to such a precise thickness, all that's needed is a bead of Permatex Ultra Black gasket maker silicone. You'll have no more worries of warped flanges and blown gaskets! Choose the style, finish, and fitment tailored for your vehicle. Sanderson handmade performance headers—for your one-of-a-kind build!
( 283 )
$760.36
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 161 )
$999.95
Schumacher Creative Services Small Block Tri-Y under chassis headers give you high-flow header performance with a custom fit that means you don't have to sacrifice your power steering. They retain exhaust studs in the heads, so no more breaking into water jackets. Unlike most headers, they don't capture the starter, have excellent spark plug clearance, and are easily installed from the top down. Schumacher Small Block Tri-Y under chassis headers work with manual or power steering and automatic transmissions, and include gaskets and collectors. Additional notes: * Requires smaller than stock starter * Requires 90-degree oil filter adapter or shorty oil filter * Tri-Y step-up design * 14-gauge steel tubing * 3/8 in. flanges at the head * Mandrel-bent for smooth flow
Not Yet Reviewed
$939.00
MagnaFlow Street Series performance exhaust systems deliver the smooth, deep sound you want—and the wide-open performance power you need! They feature straight-through flow designs for the ultimate in unrestricted horsepower and torque, while maintaining exhaust efficiency. These kits are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. Street Series components are built with 409 stainless steel and all mandrel-bent tubing. They're available in numerous configurations, including cat-back, rear axle-back, crossmember-back, and rear section; single, dual, tri, or quad turbo mufflers; and several outlet and tip options. Order the MagnaFlow Street Series performance exhaust tailored for your specific make and model. The systems carry a lifetime construction warranty.
( 605 )
$898.00
—
$1,083.00
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$1,055.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 223 )
$999.95
On Sale
Made of 100 percent heavy-gauge aluminized steel, the Armor Lite Series exhaust systems from MBRP are designed to provide cost-conscious consumers with the same high-quality design and craftsmanship as the company's other systems—but at a value price. Armor Lite is suitable for areas with moderate environmental conditions. The high-flow performance systems maximize exhaust flow so your engine keeps its cool with lower exhaust temperatures. The result is greater fuel efficiency, more torque and horsepower, increased throttle response, and a sound that is pure MBRP. These bolt-on systems include stainless steel tips and welded on hangers. Order the model designed to fit your application.
( 13 )
$764.99
Quick Time Performance Aggressor electric cutout pipes are vehicle-specific exhaust kits designed for easy installation. They've been created for each application for the best clearance, sound, and power. There's no need to figure out your install location; all of the guesswork has been done for you. Most kits eliminate the need for any welding at all. Enjoy a factory-quiet exhaust—and then, with the flip of a switch, unleash the beast! You are in control! Key features: * Electronic dual mode exhaust system * Total user control over power and sound * No custom fabrication Kits contain: * Aggressor cutout pipe kit * QTEC electronic valves * Wire harnesses * Dual position momentary switch * Hardware and gaskets * Instruction sheet
( 6 )
$834.66
Manufacturer Rebate
These MagnaFlow Off-Road Race catalytic converters feature a maximum, high-flow, straight-through, perforated core design. They use a durable stainless steel shell, so you won't have to worry about deterioration. Available for different diameters of exhaust pipe, the MagnaFlow Off-Road Race catalytic converters are the best choice, no matter what horsepower your race engine puts out.
Not Yet Reviewed
$761.00
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 262 )
$833.90
When it comes to performance exhaust systems, most people are looking for three things: power, sound, and quality. JBA exhaust systems deliver the best of all three, giving them both great looks and performance. One of the first performance upgrades typically made to a vehicle is the addition of a performance exhaust system. While there is a high demand for performance sound, the capacity for power in the JBA exhaust systems gives JBA the extra edge. Each of these systems is tuned to provide the best possible exhaust tone without being overwhelming from within the vehicle. By replacing the restrictive factory exhaust system with free-flowing, mandrel-bent stainless tubing and quality performance mufflers, JBA has developed the power, sound, and efficiency desired in a vehicle. Each of these kits is finished with a polished, chrome plated, stainless steel tip that resists discoloring, along with high-quality hardware and thorough instructions for a simple bolt-on installation.
( 90 )
$876.35
—
$940.55
MagnaFlow Race Series exhaust systems are designed for the ultimate in high performance—and the loudest, most aggressive race car sound possible! These kits remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series units feature all mandrel-bent tubing and 409 stainless steel construction. Various sizes and configurations are available for fitment on specific vehicles. Most models are dual-exhaust, and styles include cat-back and rear axle-back. Increased horsepower and torque are a given; MagnaFlow Race Series systems are recommended for those seeking maximum performance, reduced mass, and an exhaust tone that demands attention. They're covered by a lifetime construction warranty.
( 7 )
$885.00
Manufacturer Rebate
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Welding, cutting, and tube-bending equipment are not required. These cats feature a ribbed body that minimizes expansion and distortion when the converters heat up. The ribs form a channel that protects the cushioning mat from direct exposure to exhaust gases, and they hold the ceramic catalyst in proper alignment. MagnaFlow converters use a monolithic honeycomb catalyst; the ceramic coating is designed for maximum flow and surface area, and the coating method is strictly controlled to maintain exact specifications. Improper coating could result in flow restrictions or an emissions test failure. These converters are designed to exact OE specifications and are available for the most popular vehicle makes and models.
( 422 )
$769.00
Kooks Headers offers race intermediate pipes for a wide range of exhaust systems. These mandrel-bent connections are built from stainless steel and built for performance.
( 1 )
$797.73
—
$880.57
Dorman direct-fit manifold catalytic converters bring several parts together in one package for a turnkey installation. These top-quality exhaust manifolds are joined to the cat, and most models include gaskets and downpipe hardware, as well. Constructed from cast iron or stainless steel tubing, the units resist warping, cracking and leaks—and all undergo thorough inspection to ensure quality performance. Dorman direct-fit replacements deliver ease and convenience to your exhaust system upgrade. The kits are available for hundreds of makes and models.
( 20 )
$805.99
If you are looking to crank it up a notch, AWE Tuning made it easy with the Touring-to-Track Edition conversion kits in the event you want to increase the aggression inside of the cabin. The Track Edition conversions feature straight-through Track Edition rear sections and comes with new hardware. Simply unbolt the existing Touring Edition rear sections and replace with the new Track Edition rear sections. Existing tips are to be reused. So, choose the Touring-to-Track version that fits your vehicle. Features and benefits: * Handcrafted from CNC mandrel-bent, U.S.-sourced stainless steel * Direct bolt-on for factory-like simplicity * Perfect fitment, guaranteed * Features the AWE No Check Engine Light guarantee * Lifetime warranty (1-year on tip finish)
Not Yet Reviewed
$925.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
