Availability
DEI Heat Shroud sleeving solves the problem of heat and abrasions causing failure of lines, hoses, and wires without the need to disconnect them. Offered in two different materials, both provide high-temperature protection and the added convenience of a hook-and-loop closure design that eliminates the need of removing one end of connected wires, cables, or hoses to install. Heat Shroud with glass fiber fabric and aluminized outer facing has the versatility of fitting diameters from 0.5 in. to 2.5 in. diameter, is easy to trim to length, and reflects 90 percent of radiant heat. For more demanding applications there is DEI Heat Shroud GOLD featuring metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base (rated to 1,100 degrees F) material. It is able to reflect radiant heat up to 800 degrees F and will fit diameters from 0.5 in. to 1.25 in.
( 72 )
$31.99
DEI Fire Sleeve and tape kits include their popular thermal insulator sleeving, along with a 16 in. length of Fire Tape. Fire Sleeve is constructed from a high-temperature resistant braided glass material heavily coated with 100 percent iron oxide silicone rubber. They provide the ultimate in heat insulation and protection from direct heat up to 500 degrees F. DEI kits are available with different diameters and lengths of Fire Sleeve. The Fire Tape will finish off sleeve ends when joining together creating a clean professional look. More features: * Insulates wiring, hoses, oil/brakes/transmission lines * Use for bundling and protecting hoses, electrical wiring, etc. * Withstands 2000 degrees F of intermittent heat
( 38 )
$25.99
—
$35.99
DEI Heat Sheath sleeves are made from high-temperature fiberglass fabric bonded to aluminized material and then sewn into a tube. Designed to slide over wires and hoses, these sheaths can be easily shaped to fit the tightest bends. They will reflect up to 90 percent of the radiant heat and can insulate against up to 500 degrees of direct, continuous heat. They can be easily cut to length with scissors or a sharp knife and come in five popular diameters from 3/4 in. to 1 1/4 in., in 3 ft. lengths. They are also available in bulk, up to 50 ft. rolls.
( 90 )
$14.99
—
$32.99
DEI Vapor Block fuel line sleeves provide an easy, sensible, and low-cost solution to rough idling and difficult starting caused by vapor lock. Designed to greatly reduce heat in the line--keeping the fuel cooler and below boiling--the protective sleeves install hassle-free with a split design and adhesive flap; there's no need to disconnect the fuel line to install them! Simply wrap Vapor Block around the fuel line, remove the adhesive release liner, and press the adhesive-backed flap into place. Features and benefits include: * Made of glass fiber and polyester laminated to an aluminum outer layer * Offers excellent inexpensive, long-lasting thermal protection with no modifications needed * Available in different diameters
( 23 )
$16.99
—
$22.99
DEI Fire Tape is a non-adhesive silicone rubber tape that is self-bonding, self-curing, and forms a permanent watertight barrier. It's ideal for use with DEI Fire Sleeves and serves as an excellent insulating alternative for vinyl tapes and wraps. Other uses include wrapping wiring harnesses, along with covering and protecting wire splices and electrical wire terminations. It withstands 500 degrees of direct continuous heat, does not harden, remains flexible, and is self-bonding and self-curing.
( 5 )
$37.99
DEI Turbo Insulation kits are designed to fit all turbos from the sport compact turbos to the large over the road trucks. Designed to reduce turbo lag and reduce under hood temperatures, these Turbo Insulation Kits add additional horsepower while protecting costly components from unwanted heat. The kits come complete with all the materials necessary for a clean, professional looking installation.
Not Yet Reviewed
$87.99
DEI Heat Sheath GOLD sleeves will protect and keep components cool in the most demanding applications. They are manufactured from high-temperature metalized polyimide lamination, bonded to a robust 20 oz. heat-treated glass fiber base material. DEI GOLD is able to reflect radiant heat up to 800 degrees F making the sleeves perfect to keep critical lines, air intakes, and hoses cool and protected. The base glass is rated up to 1,100 degrees F.
( 6 )
$28.99
Extreme heat can rob power and potentially damage engines, transmissions, hoses, and sensitive electrical components. DEI has introduced a revolutionary advancement in Titanium pipe shield with LR technology that greatly outperforms Mylar-backed glass fiber shields. This exhaust wrap combines the high-heat tolerance of DEI's proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900 degrees F, with the Mylar outer material cracking and flaking off. DEI's titanium pipe shield provides heat protection up to 1,350 degrees F. LR fiber is a two-ply material. The outer layer is made from lava rock pulverized and stranded into a proprietary, tightly woven weave for durability and strength. The inside material is made of a special high temperature-resistant fabric (89 percent silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology, combined with DEI's unique shield standoff bracket design, provides an air gap between the shield and pipe that maximizes the potential for cooling and heat dissipation. With the strategic placement of DEI titanium exhaust wrap near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks, or motorcycle pipes, radiant heat can be controlled for maximum protection and performance.
( 46 )
$69.99
On Sale
DEI titanium knitted exhaust shield sleeves are available in different pre-cut lengths. They have a maximum temperature rating of 1,800 degrees F (Fahrenheit) with a continuous rating of 1,382 degrees F. The sleeves are perfect for larger exhaust pipes, as they can expand up to 1.5 times their normal diameter, allowing you to install them over flanges and sensor threads. They can also be cut to length, then you simply roll the ends. Protect components and keep heat from transferring into the vehicle cabin with an assist from the DEI Titanium Knit Exhaust Shield Sleeves best suited for your application. More product features, items, and specifications include: * Ties and tool * Hi-tech carbon fiber look * Reduces temperature/vibration breakdown * Pre-wetting roll not necessary for wrapping * Extremely pliable for a tight and secure wrap * Wrap for 4 in. pipe will also fit 5 in. pipe * Wrap for 3 in. pipe will also fit 4 in. pipe * Promotes increased flow for improved performance * Resistance to abrasions and oil spills
( 2 )
$77.99
$70.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
