Engines & Engine Parts at Summit Racing

Turn One Power Steering Pulleys

Turn One power steering pulleys are the ideal balance of lightweight, durable, and aesthetic! These pulleys offer specialty cutouts for easy access for pump mounting hardware and several configurations (factory to overdrive ratios). Help your ride withstand the high-RPM operation and stresses from street- or race-duty. Order the Turn One serpentine power steering pulley recommended for your vehicle.

5.0 out of 5 stars ( 1 )

$120.00

Summit Bucks

Chevrolet Performance SP350 385 HP Turn-Key Long Block Crate Engines

You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)

Not Yet Reviewed

$12,667.94

Summit Bucks

Chevrolet Performance SP350 357 HP Turn-Key Long Block Crate Engines

You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 turnkey long block crate engine. They put out 357 HP with loads of low-end torque. In fact, the engines produce 400 lbs.-ft. of torque for a thrilling feeling of immediate performance. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Cast aluminum pistons (9.0:1 compression ratio) * Hydraulic roller camshaft: .473 intake/.473 exhaust lift, 215 intake/223 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 32 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)

Not Yet Reviewed

$8,170.05

BluePrint Builder Series 383/436HP Standard Edition EFI Crate Engine and 700R4 Transmission Combos

BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy small block-compatible 383 (c.i.d.) engine that produces 436 horsepower, this standard edition builder series includes a polished pulley kit and 700R4 automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 443 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 383/436HP Standard Edition EFI crate engine and 700R4 transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.000 in. * Main caps are 4-bolt * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.750 in. * OEM-style 5.700 in. connecting rods * Hypereutectic pistons * Weighted 8 in. harmonic balancer (BPP400L) Cylinder Heads: * BluePrint H8002K performance models (0.500 in. raised port vs. OEM) * Chamber – 64cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 195cc intake and 75cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.544 in. * Exhaust valve lift – 0.555 in. * Intake duration at 0.050 in. of lift – 230 * Exhaust duration at 0.050 in. of lift - 236 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees * Total is 32-34 degrees * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 700R4 package * Torque converter with 2,200 – 2,400 rpm stall * Weighted flexplate (one-piece, RMS) * Starter * Due to numerous tire/rear gear combinations, this transmission does not ship with a speedometer gear or sender housing Other Components: * Dual plane aluminum intake manifold with satin finish * Complete EFI system with pump kit * Spark plugs and wires (with separators) * Valve covers, oil pan, and timing cover * Oil filter * Front accessory drive with polished finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Factory 5 applications require a special order (please call). Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR compatibility.

Not Yet Reviewed

$18,599.00

Granatelli Motor Sports Vented Oil Fill Caps

Granatelli Motor Sports vented oil fill caps will eliminate the need to modify your valve covers when adding a catch tank to your racing engine (required by most sanctioning bodies in racing applications). An internal baffle inside the cap helps reduce transfer of oil to the catch tank. These billet aluminum vented oil fill caps screw into the valve cover like an ordinary cap and are made to fit stock or fabricated valve covers. They also serve as a thread adapter for a -10 AN ORB threaded breather. Order the cap style you need.

5.0 out of 5 stars ( 1 )

$19.95

—

$24.94

Trick Flow® Twisted Wedge 11R® 170 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 170 head. Trick Flow® Twisted Wedge® 11R 170 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge®-specific pistons. New high-velocity, race-inspired CNC street ported runners have been optimized for today's popular bore and stroke combinations, and have a standard resolution surface finish for significant performance gains. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure exceptional quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 170 cylinder heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 8 )

$1,324.99

Melling AFM/MDS Delete Combo

Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.

4.5 out of 5 stars ( 6 )

$640.99

—

$1,394.99

Motorcraft Oil Filters

Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before

4.88 out of 5 stars ( 137 )

$9.99

—

$42.99

Trick Flow® Twisted Wedge 11R® 190 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 190 head. These heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge®-specific pistons. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. You can get your Twisted Wedge® 11R 190 heads in two flavors: • 11R 190 heads with new high-velocity, race-inspired CNC Street Ported runners are great entry-level CNC heads combining fully CNC-machined runners and combustion chambers with a standard resolution surface finish for significant performance gains. • 11R 190 heads with CNC Competition Ported high-velocity, race-inspired runners feature fully CNC-machined runners and chambers with a premium high resolution finish for ultimate performance. Premium certified materials and components, along with the finest CNC tooling, are used to ensure exceptional quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 190 cylinder heads are available fully assembled or as bare castings and sold individually.

4.86 out of 5 stars ( 28 )

$1,349.99

—

$1,524.99

Trick Flow® PowerPort® Cleveland 195 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Trick Flow PowerPort® Cleveland 195 cylinder heads feature runners based on the OEM Ford 2V design. The heads feature CNC Street Ported runners that are CNC-machined with a standard resolution surface finish—perfect for street and strip machines. The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 195 heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

4.68 out of 5 stars ( 25 )

$1,050.99

—

$1,424.99

Summit Racing™ Cast Aluminum Timing Covers

Summit Racing™ cast aluminum timing covers are the perfect addition to your powerhouse. They feature a stout diecast aluminum design to keep true, and have thick gasket rails for rigidity and optimum oil sealing. With their show-polished finish, you'll be sure to turn some heads when you pop the hood. These replacement timing covers are available in a variety of styles, shapes, and finishes—for year/make and engine applications from 1955 and up.

4.12 out of 5 stars ( 119 )

$43.99

—

$89.99

FLOTEK 185cc Small Block Ford Thumper Cylinder Heads

FLOTEK 185cc Small Block Ford Thumper cylinders heads feature a raised "floor" and "roof" design. Why you ask? This allows a better approach to the valve when attempting to achieve high performance and to keep air and fuel attached to short turn radius for increased torque over a wider rpm range without sacrificing high-rpm power. Coupled with the new chamber design for better wet flow quality and a "W" design exhaust port to keep flow attached to the port floor which greatly increases exhaust gas evacuation verses original 180cc design. Always thinking of the racer, the FLOTEK Thumper 180 accepts stock manifold!

4.0 out of 5 stars ( 5 )

$359.00

—

$539.00

Melling Oil Pumps

Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.

4.57 out of 5 stars ( 331 )

$35.99

—

$897.99

King SI-Series Main Bearings

King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.

4.0 out of 5 stars ( 90 )

$12.50

—

$168.99

Summit Racing™ Oil Pumps

Don't waste time installing a generic oil pump when you can get a high-quality Summit Racing™ pump that's ready to go. The high volume pumps deliver 20-25 percent more oil than the standard volume pumps, and are pressure-tested and hand-turned to guarantee performance. Available in iron and nodular iron for most applications.

4.64 out of 5 stars ( 186 )

$46.99

—

$93.99

Improved Racing CCS Oil Catch Can Kits

Improved Racing set out to design the best air-oil separating catch cans specifically for the factory supercharged vehicles. Focused on three simple design goals: maximized efficiency, durability, and ease of use, the development of the CCS oil catch cans happened over several years and included ANSYS Fluent CFD simulations, extensive bench tests, and on-vehicle street and track tests. Final prototype testing also included a 9-month beta testing program in collaboration with various road racers, drag racers, and drifters. The CCS's design maximizes air-oil separation efficiency, resulting in a peak separation efficiency of 85 to 90 percent. For comparison, none of the competitor's catch cans tested showed a peak efficiency of more than 60 percent. The CCS oil catch cans are durable, made from high-quality, reliable components and, as with any Improved Racing product, nothing will vibrate loose or come apart under racing conditions. Keep contaminants out of your intake to increase octane and keep your engine clean with Improved Racing CCS oil catch can kits. Select the kit specifically designed for your application needs. Product details: * The CCS features tangential entry port for cyclonic separation for maximized efficiency—separates as much vapor from crankcase blow-by fumes as possible with minimal restriction * Other features include stainless steel filter with multiple filter seals, primary seal, bell mouth exit plenum, anti-splash-back funnel with spiral drain groves, and 7.0 fluid oz. or 3.5 fluid oz. reservoir * Quick-turn, easy to service reservoir * Includes mounting bracket and custom made, emissions friendly, quick-connect lines—designed specifically for factory supercharged vehicles * CNC-machined aluminum bracket locks into position every 22.5 degrees—allows for different mounting options specific per the make and model vehicle to offset catch can from engine to clear larger engine covers, evap lines, etc. * Optional drain kit (sold separately) is available to allow for remote draining without removing the catch can—because engine bay fitment is tight on specific vehicles * Fast and flexible mounting bracket system for installation/removal and positioning—tool-free bracket nut can be removed without tools, or snug it down with 5/8 in. wrench * No sight glass needed—just push-up and twist a 1/8th turn to remove the reservoir and look inside, no more fumbling, or endless unscrewing to remove the reservoir * A powerful wave spring keeps the reservoir locked in place—included positive safety lock clip is also included just in case you want to be absolutely sure the reservoir cannot be removed

5.0 out of 5 stars ( 4 )

$299.00

—

$349.00

King SI-Series Rod Bearings

King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.

4.57 out of 5 stars ( 103 )

$7.50

—

$92.99

Trick Flow® Twisted Wedge 11R® 205 Cylinder Heads for Small Block Ford

Something great just got better! Trick Flow® used advanced 3D solid modeling and CAD tools (plus a couple decade's worth of racing experience) to turn its track-proven Twisted Wedge® design into the potent Twisted Wedge® 11R 205 head for serious performance enthusiasts and racers. Trick Flow® Twisted Wedge® 11R 205 heads are a direct replacement for previous Twisted Wedge® heads and work with all Twisted Wedge-specific pistons. New high velocity, race-inspired CNC Competition Ported runners have been optimized for today's popular bore and stroke combinations, and have a premium high resolution finish for ultimate performance. Modified 11 degree intake and 13 degree exhaust valve angles and a restructured, CNC-profiled combustion chamber arrangement provides more airflow and performance potential. Premium certified materials and components, along with the finest CNC tooling, are used to ensure uncompromising quality and durability, dimensional accuracy, and balanced flow from port-to-port. The fully machined castings are very strong and have a great-looking, billet-like appearance. Trick Flow® Twisted Wedge® 11R 205 cylinder heads are available fully assembled or as bare castings and sold individually.

5.0 out of 5 stars ( 7 )

$1,256.99

—

$1,574.99

D.S.S. E Series Forged Pistons

D.S.S. E Series forged pistons are fully forged and machined from a 4032 alloy material with precision-honed piston pin bores and include heavy-duty piston pins. The pistons are full-floating or press-fit compatible and use double true arc pin locks, forged oil drainbacks, double valve notches, and diamond turned piston skirts. Get high-quality pistons at a great price--try a set of D.S.S. E Series forged pistons today!

4.74 out of 5 stars ( 62 )

$429.95

—

$542.95

Milodon Pro Touring Oil Pans

Milodon Pro Touring oil pans are designed to provide an adequate oil supply during the rapid acceleration, hard deceleration, and violent turns common to motorsports. The replacement pans are available in dozens of sizes, configurations, and options. Order the model recommended for your vehicle.

3.93 out of 5 stars ( 45 )

$529.95

—

$689.95

Pacific Performance Engineering MicroPure Extreme-Performance Oil Filters

Pacific Performance Engineering MicroPure Extreme-Performance engine oil filters offer 2.5 times the filtration area of a conventional oil filter, providing the performance your engine oil needs to stay cleaner and for longer periods. Specially engineered synthetic filtration media achieves superior filtration to trap particles down to 5 microns, while a high-powered magnet secured at the bottom of the filter catches metal debris, preventing it from clogging the filter media and prolongs oil life. MicroPure's bypass valve is 10 psi stiffer than the OEM bypass valve and reduces the chance of dirty oil bypassing, and a heat-resistant silicone anti-drain-back valve retains the oil in the filter after the engine is turned off. With increased filtration area, four times finer media, and prolonged filter life, the PPE MicroPure Extreme-Performance filter is the ultimate choice for your engine. Additional features and notes: * 900 sq. in. of premium composite filtration media, a 150 percent increase over stock * Perforated metal core and spiral-wrapped adhesive secures filter media * 3/16 in.-16 UNF threaded baseplate with 47 percent larger passages * Direct replacement for the stock oil filter * High-power internal Neodymium magnet * 50 percent thicker base plate * Withstand 450 psi maximum burst pressure * TorqueStop feature to ensure a tight seal * Reinforced silicone anti-drain-back valve ensures a unidirectional flow

5.0 out of 5 stars ( 3 )

$14.39

—

$35.99

Cloyes Hex-A-Just Timing Sets

With Cloyes Hex-A-Just timing sets, infinitely adjustable cam timing is as simple as turning an Allen wrench. Consisting of SAE 1144 billet steel cam and crank sprockets and a true roller timing chain, these timing sets use a special hex-head bushing installed on your cam's dowel pin. This bushing lines up with degree marks on the cam sprocket. You can adjust timing in fractions of a degree (as much as +/-6 degrees) by loosening the cam bolts and turning the bushing with an Allen wrench. Cloyes Hex-A-Just timing sets install under your stock timing cover and can be used in align-bored blocks. Order the model designed for your vehicle and engine application.

4.65 out of 5 stars ( 34 )

$170.99

—

$297.99

Trick Flow® PowerPort® Cleveland 225 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Designed for high performance street/strip engines! Trick Flow® PowerPort® Cleveland 225 cylinder heads feature runners based on the OE Ford 2V design. The heads feature fully CNC competition ported runners with a premium high resolution surface finish for maximum, all-out performance The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 225 cylinder heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 6 )

$1,074.99

—

$1,699.99

Canton Racing Road Race Series Wet Sump Oil Pans

No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.

4.22 out of 5 stars ( 72 )

$409.00

—

$1,389.00