Engines & Engine Parts at Summit Racing

Summit Bucks

ACDelco GM Genuine Parts Replacement Bolts

ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.

3.4 out of 5 stars ( 15 )

$3.99

Summit Racing™ Bolt Kits

Summit Racing™ offers these heat treated, black oxided Grade 8 bolts with reduced profile hex heads for clearance. Available kits include flywheel, torque converter, rocker arm studs, oil pump stud, cam bolt, intake manifold, and harmonic balancer.

2.0 out of 5 stars ( 1 )

$119.99

—

$160.99

Summit Racing™ Pro LS Vortec Truck Swap Camshafts

Summit Racing™ Pro LS Truck Swap cams are affordable and give you maximum punch where the torque converter hits. The cam lobes are designed for excellent valvetrain longevity. Both drop-in or high-lift versions are available. They come in stages allowing you to quickly determine which gives you the idle and efficiency you are looking for. Idle response and the midrange torque from theses camshafts is unmatched. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for an extremely good finish quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available, quality spring packs.

4.75 out of 5 stars ( 91 )

$299.99

—

$319.99

BluePrint Engines Ford 302 C.I.D. 361 HP Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes (depending on part number): * Valve covers * Timing cover * Carburetor or Throttle Body * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine Note: Engine requires a V-belt standard rotation water pump and belt system. Timing cover is designed for standard rotation water pump only.

4.5 out of 5 stars ( 10 )

$6,649.00

—

$10,199.00

BluePrint Engines 302 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 302 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 16 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * Cast iron crankshaft * 3.00 in. stroke * OEM 5.090 in. connecting rods * Hypereutectic pistons * 50oz external engine balance Cylinder heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial with 32-34 degrees total Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

Not Yet Reviewed

$6,049.00

Howards Cams Big Daddy Rattler Camshafts

Howards Cams Big Daddy Rattler camshafts are street performance cams designed to give a nice aggressive-sounding idle without sacrificing throttle response and horsepower gains. Big Daddy camshafts are top dog in the Rattler lineup, and as such they offer a rough idle, and are best used in Pro Street or street/strip applications. Compression needs to be at least 9.5:1, the torque converter needs to stall 2,800 rpm or higher, and a performance intake manifold, steeper gears, and free-flowing exhaust are required to take advantage of the camshaft's capabilities.

Not Yet Reviewed

$199.99

—

$429.99

Cam Motion Junkyard Dog Series Performance LS Camshafts

Cam Motion Junkyard Dog Series Performance LS camshafts are aggressive and powerful cams engineered for carburetor or single-plane intake manifolds. The camshafts are designed to get maximum performance out of your stock short block, while still maintaining acceptable valve clearance without fly-cutting the pistons. They feature Cam Motion's smooth cam lobe design that provides quiet valvetrain operation and excellent upper rpm stability. Junkyard Dog cams are available for cathedral and rectangular port cylinder heads, as well as for nitrous applications. Cam Motion offers the camshafts in 5150 induction-hardened chromium, 8660 induction-hardened nickel-chromium-molybdenum, and their top-of-the-line 8620 carburized nickel-chromium-molybdenum camshaft cores. Cam Motion Junkyard Dog cams are bred for vehicles equipped with headers, high-flow exhaust, increased stall speed torque converters, and increased rear axle ratios. Order the model tailored for your vehicle application.

Not Yet Reviewed

$399.00

—

$575.00

Cam Motion Street King Stroker LLR Series LS Camshafts

Cam Motion Street King Stroker LLR Series LS camshafts are designed for maximum street performance and street/strip applications in cars using 402-418 cu. in. LS engines equipped with either cathedral port, LS1-style heads; or LS engines with rectangular port, LS3, L99, or L92-style heads. The options are available for either factory-style intake and high-flow aftermarket long runner intake manifolds; or single-plane and other short runner intake manifolds. The Street King Stroker will have a rough idle and explosive midrange and high-rpm power. These units are designed for the enthusiast who wants the most aggressive camshaft for maximum power from their street-driven stroker engine. Street Kings require intake and exhaust modifications for maximum flow. Headers, high flow exhaust, intake system upgrades, increased stall speed torque converter, and increased rear axle ratios are required to achieve maximum performance. Street King Stroker LLR Series LS camshafts are designed with Cam Motion's renowned smooth cam lobe, providing quiet valvetrain operation and excellent upper rpm stability. These models are offered in Cam Motion's top-of-the-line 8620 camshaft cores.

Not Yet Reviewed

$575.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.36 out of 5 stars ( 28 )

$5,949.00

—

$7,899.00

BluePrint Engines Ford 302 C.I.D. 361 HP EFI Dressed Long Block Crate Engines

BluePrint Engines Ford 302 c.i.d. 361 HP EFI dressed long block crate engines are ideal for daily drivers and cruising. Fully dressed, these engines makes up to 16 in. of vacuum and will work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Details and specs: * 361 hp/334 lbs.-ft. * Compression Ratio: 9.4:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision Rotating Assembly: * 3.000 in. stroke * OEM type 5.090 in connecting rods * Hypereutectic pistons * 50oz external balance Cylinder Heads: * BluePrint aluminum cylinder heads (HP9008) * 60cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 190cc intake/60cc exhaust runners Roller Cam specs: * .533 intake/.544 exhaust * 215 intake/220 exhaust duration @ .050 - 114-degree lobe separation Ignition timing: * 10-16 degrees initial, 32-34 total Also includes: * Front sump oil pan * Valve covers * Timing cover * EFI * Standard rotation water pump * Spark plugs and wires * Distributor * Intake * Harmonic balancer * Dyno test results shipped with engine

Not Yet Reviewed

$7,699.00

—

$10,199.00

On Sale

COMP Cams Magnum Hydraulic Camshafts

Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.

4.75 out of 5 stars ( 60 )

$282.95

—

$297.95

BluePrint Engines 350 C.I.D. Cruiser Crate Engines

BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine

4.56 out of 5 stars ( 9 )

$4,899.00

BluePrint Engines 350 C.I.D. Cruiser Base Crate Engines

BluePrint Engines 350 c.i.d. Cruiser base crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work great with power brakes, stock torque converter, stock gearing, and run great on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover • Aluminum intake manifold * HEI distributor • 600 cfm Carburetor * Dyno tested results shipped with engine

4.32 out of 5 stars ( 19 )

$5,549.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$19,749.00

—

$22,799.00

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block Crate Engines

BluePrint Engines GM 454 C.I.D. 460 HP Cruiser Dressed Long Block crate engines are available in three different models—two with complete front accessory drives. All models deliver 460 hp and 479 lbs.-ft of torque; and feature aluminum heads, hydraulic roller cam, forged crank, hypereutectic pistons, and a compression ratio of 9.85 to 1. Additional specifications include: * BLOCK: NEW BluePrint Cast Iron Block, 454 BBC Manufactured and Machined in the USA 4-Bolt Main 4.250 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Standard Deck * ROTATING ASSEMBLY: New BluePrint Forged Crankshaft 4.000 in. Stroke, 4.250 in. Bore 6.135 in. connecting rods with 150,000 psi bolts Hypereutectic pistons External * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 119cc chamber 2.30 in. intake/1.88 in. exhaust valves 316cc intake/124cc exhaust runners Cylinder heads feature a .300 in. raised exhaust port vs. an OEM casting Must verify header/exhaust clearance * CAM SPECS: Cam Type: Roller .501 Intake .510 Exhaust 216 Intake / 228 Exhaust duration @ .050 - 112 degree lobe separation * IGNITION TIMING: 10-16 degrees initial and total timing 32-36 degrees at 3,500 rpm * ALSO INCLUDES: Intake Manifold single plane, satin aluminum 750cfm Carburetor Valve covers, oil pan and timing cover Dyno test results shipped with engine 30 month / 50,000 mile warranty * NOTES: This engine is an excellent cruiser and daily driver engine. This engine makes up to 15 in. of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel. Features External 42.5 oz. imbalance. Recommend GM flywheel 14096987, or TCI flexplate 399973. INCLUDED ONLY WITH MODEL BP454CTCK: * Installed polished complete front accessory drive system with A/C, P/S, WP, all belts and pulleys. INCLUDED ONLY WITH MODEL BP454CTCKB: * Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.

5.0 out of 5 stars ( 2 )

$9,949.00

—

$12,049.00

FTI Performance Crankshaft Adapter Sleeves

FTI Performance offers a wide selection of torque converter parts, including bolt kits, crank adapters, and related accessories. These crankshaft adapter sleeves will adapt GM torque converters to Ford small block or big block engines with 1.375 in. pilot. They're available for many Ford applications from the 1960s and up; and Chevy applications from the 1990s and up.

4.0 out of 5 stars ( 1 )

$29.39

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$6,549.00

—

$8,949.00

Cam Motion LS Positive Displacement Supercharger Camshafts

Cam Motion LS Positive Displacement Supercharger camshafts are designed for a variety of applications, from basic street performance to aggressive and maximum street performance. They're intended for vehicles using an LS engine (various sizes) equipped with a positive-displacement style supercharger. Depending on the model you select, drivers can expect a mild performance idle and improved power throughout the rpm range—with emphasis on mid-range and upper rpm range for the more aggressive applications. Additional performance gains can be achieved when used with headers, free-flowing exhaust, and an increased stall speed torque converter. The Supercharger Series cams are designed with Cam Motion's renowned smooth cam lobe to provide quiet valvetrain operation and excellent upper rpm stability. Select the camshaft options best-suited for your driving needs.

5.0 out of 5 stars ( 3 )

$399.00

—

$575.00

Cam Motion Hotrod Series Performance LS Camshafts

If you're seeking a choppy or lopey idle sound similar to old 3/4 cams, you'll need Cam Motion Hotrod Series performance LS camshafts. They work great with both cathedral port and rectangular port cylinder heads and are available with 5150 induction-hardened chromium; 8660 induction hardened nickel-chromium-molybdenum; and 8620 carburized nickel-chromium molybdenum camshaft cores. These units are designed with our renowned smooth cam lobe design that provides quiet valvetrain operation and excellent upper rpm stability. If you want to hot rod or street/strip race your carbureted LS, install Cam Motion Hotrod Series performance LS camshafts. Additional Hot Street LS features: * Specifically designed for single plane intake manifolds, but work well on certain dual plane applications * Designed to be used for vehicles equipped with headers, high-flow exhaust, increased stall speed torque converter, and increased rear axle ratios Additional Little Chopper features: * Will work on stock engines, but substantial performance increases when used with headers, high-flow exhaust, and high-flow intake systems and increased rear axle ratios * Increased stall speed torque converter required * Can be used with all intake manifold styles, from the stock plastic intakes to carbureted single and dual plane

Not Yet Reviewed

$399.00

—

$575.00

Cam Motion LS Centrifugal Supercharger Camshafts

Cam Motion LS Centrifugal Supercharger camshafts are designed for mild to moderate performance, truck, and towing applications in vehicles using various LS engines equipped with centrifugal-style superchargers. Most vehicles will see a moderate performance idle and improved power throughout the rpm range. Additional performance gains can be achieved when used with headers, an increased stall speed torque converter, free-flowing exhaust and intake systems. The Supercharger Series cams feature a smooth cam lobe design that provides quiet valvetrain operation and excellent upper rpm stability. Select the model and options best-suited for your driving needs.

Not Yet Reviewed

$399.00

—

$575.00

Cam Motion Race Day Series Racing LS Camshafts

Cam Motion Race Day Series Racing LS camshafts are designed for drag racing applications in cars using LS engines equipped with either cathedral port, LS1-style heads; or rectangle port, LS3/L92-style heads—and single-plane intake manifolds like the Victor, High Ram, Mid Ram, and GMPP-style intakes. Designed with the budget racer in mind, these camshafts are ideal for the enthusiast looking for great results while maintaining a modest rpm range. Race Day cams are intended to be used with high compression and the proper racing fuel for best results. The base version of these camshafts is designed to work with stock rocker arms and quality performance hydraulic lifters. This cam will have a rough, race car idle. It also requires pistons with valve reliefs for proper piston-to-valve clearance. Race Day Series camshafts require intake and exhaust modifications for maximum flow. Headers, open or racing exhaust, racing intake systems, properly suited racing torque converter, and optimal rear axle ratios to achieve maximum performance. Race Day LS camshafts are designed with Cam Motion's renowned smooth cam lobe design, providing quiet valve train operation and excellent upper rpm stability. This hydraulic roller tappet-style model is offered in 5150, 8660, and Cam Motion's top-of-the-line 8620 camshaft cores.

Not Yet Reviewed

$575.00

Cam Motion Street King Series Performance LS Camshafts

Cam Motion Street King Series Performance LS camshafts are designed for maximum street performance and street/strip applications in cars using an LS engine equipped with cathedral or rectangle port, LS1-style heads—and a single-plane intake manifold, like the Victor, High Ram, Mid Ram, and GMPP-style intake. The Street King will have a very lopey-to-rough idle, and explosive mid-range and high-rpm power. These camshafts are designed for the enthusiast who wants a very aggressive camshaft for maximum power from their street-driven engine. Street Kings require pistons with valve reliefs for proper piston-to-valve clearance, as well as intake and exhaust modifications for maximum flow. Headers, high flow exhaust, intake system upgrades, increased stall speed torque converter, and increased rear axle ratios are required to achieve maximum performance. Street King LS camshafts are designed with Cam Motion's renowned smooth cam lobe design, providing quiet valvetrain operation and excellent upper rpm stability. This model is offered in in 5150, 8660 and Cam Motion's top-of-the-line 8620 camshaft cores.

Not Yet Reviewed

$399.00

—

$575.00

Cam Motion Titan LLR Series LS Camshafts

Cam Motion LLR Series LS camshafts are low lash solid roller-style cams designed for performance enthusiasts who want maximum performance from their LS and Gen 5 LT-powered vehicle. These camshafts deliver the precision high-rpm valvetrain stability that solid cams are known for, with the low maintenance dependability and quiet operation that makes sense in a modern vehicle. Designed for max street, street/strip, and race cars, Titan Kings will have a heavy lope at idle and explosive power in a vehicle equipped with the proper high stall torque converter, rear axle ration, and supporting intake exhaust that's been modified or designed for high flow. The cams enable drivers to get the most from their stock bottom end engines. They're engineered to fit without the need to fly-cut valve reliefs in the pistons; however, it's the owner/builder's responsibility to assure safe clearance. Titan Series units feature Cam Motion's renowned smooth cam lobe design, providing quiet valvetrain operation and excellent upper rpm stability. They're offered in top-of-the-line 8620 camshaft cores.

Not Yet Reviewed

$575.00

Cam Motion Race Day LLR Series Racing LS Camshafts

Cam Motion Race Day LLR Series Racing LS camshafts are designed for drag racing applications in cars using LS engines equipped with either cathedral port, LS1-style heads; or rectangle port, LS3/L92-style heads—and single-plane intake manifolds like the Victor, High Ram, Mid Ram, and GMPP-style intakes. Designed with the budget racer in mind, these camshafts are ideal for the enthusiast looking for great results while maintaining a modest rpm range. Race Day cams are intended to be used with high compression and the proper racing fuel for best results. The base version of these camshafts is designed to work with stock rocker arms and quality performance solid lifters. This cam will have a rough, race car idle. It also requires pistons with valve reliefs for proper piston-to-valve clearance. Race Day LLR Series camshafts require intake and exhaust modifications for maximum flow. Headers, open or racing exhaust, racing intake systems, properly suited racing torque converter, and optimal rear axle ratios to achieve maximum performance. Race Day camshafts are designed with Cam Motion's renowned smooth cam lobe design, providing quiet valve train operation and excellent upper rpm stability. This mechanical roller tappet-style model is offered in Cam Motion's top-of-the-line 8620 camshaft core.

Not Yet Reviewed

$575.00