Engines & Engine Parts at Summit Racing

Summit Racing™ Timing Tape

Our precision timing tape is designed to allow you to accurately time street or high performance engines and properly set the valve lash.

4.33 out of 5 stars ( 236 )

$4.99

On Sale

Moroso Billet Aluminum Adjustable Vacuum Relief Valves

Choosing your desired vacuum level to optimize performance is easier with Moroso billet aluminum adjustable vacuum relief valves. They have vacuum relief points that adjust with the turn of a built-in knob so you get the precise amount of vacuum you want. Plus, tightening the integral locknut keeps the adjustment locked until you change it. Able to work with any vacuum level, these vacuum relief valves are crafted from 6061 aluminum with a smooth, attractive finish and can be disassembled for easy cleaning and maintenance. Get the right performance for the right horsepower with Moroso billet aluminum adjustable vacuum relief valves.

4.4 out of 5 stars ( 5 )

$94.99

$85.49

JOES Racing Products Vent Tanks

Is your transmission or rear-end vent line blowing oil? Sounds like you could use one of JOES Racing Products' vent tanks to remedy the situation. They're offered for 1 1/2 in. or 1 3/4 in. tube mounting and flat sheet metal mounting. These units are equipped with a filter to keep dirt out of your lubricant, and 1/4 in. NPT pipe threads or an -8 AN at the bottom for your vent line.

4.6 out of 5 stars ( 20 )

$74.95

—

$129.95

JOES Racing Products Replacement Remote Oil Filter Mounts

JOES Racing Products replacement remote oil filter mounts make mounting easy. Choose from their anodized aluminum clamp-only replacements or their sheet metal replacements for flat panels.

Not Yet Reviewed

$51.95

—

$64.95

ICT Billet Oil Filter Adapters

ICT Billet oil filter adapter mounts come without the high-pressure bypass valve found on stock filter mounts, ensuring that all oil travels through your filter before entering your engine. ICT Billet oil filter adapters are shipped complete with an O-ring seal and self-locking hardware.

Not Yet Reviewed

$131.99

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Dressed Long Block Crate Engines

Does your car need more power? Of course it does! Install 540 hp and be the envy of the block. BluePrint Engines Pro Series 427 c.i.d. dressed long block crate engines have the muscle you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivable and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 427 c.i.d. dressed crate engines are the way to go! Features include: * BluePrint Engines cast iron block * 4340 forged crankshaft * 4340 forged connecting rods * Forged pistons * 9.5:1 compression * 4.125 in. x 4.000 in. bore/stroke * Hydraulic roller camshaft * Double roller timing chain * 64cc chamber aluminum cylinder heads * 1.6 ratio rocker arms * Carburetor * Billet distributor

5.0 out of 5 stars ( 5 )

$11,199.00

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

5.0 out of 5 stars ( 12 )

$2,249.99

—

$3,399.99

BluePrint Engines Pro Series Chevy 572 C.I.D. 745 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 572 c.i.d. dressed long block crate engines are loaded with 745 hp for tire-ripping power! They feature a 30-month/50,000-mile warranty. These engines are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 572 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint tall deck * 1 piece rear main seal * 4.500 inch bore * Forged crankshaft * Forged connecting rods * Forged pistons * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration @ 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Aluminum cylinder heads * Billet distributor * Carburetor

5.0 out of 5 stars ( 1 )

$15,799.00

On Sale

Holley Track Series Valve Covers

Holley Track Series valve covers are GM licensed and provide an excellent way to add high-end appeal to your favorite Chevy engine. These lightweight, yet tough valve covers are constructed of 6061 T-5 sheet aluminum, precision TIG-welded for a proper fit. They feature laser-etched Chevrolet and Bowtie emblems. The covers are available in silver anodized or black coated finishes, along with various heights to clear most popular rocker arm combinations. All models include mounting hardware for quick and simple installation.

4.04 out of 5 stars ( 75 )

$315.95

$184.45

—

$284.35

Summit Racing™ Ultimate Oil Separators and Catch Cans

Summit Racing™ ultimate oil separators and catch cans protect your engine by capturing oil and water vapors trapped in your crankcase that normally find their way through the PCV system and into the intake tract to be burned in the combustion process, which could leave deposits or cause detonation. The design team at Summit Racing™ started with a clean sheet to build a unique baffling system that catches nearly 100 percent of air born oil and other vapors. Various models are available that vent externally, recirculate, or recirculate with a pressure relief system. Check out the list of cool features of our ultimate oil separators and catch cans below. * Billet aluminum can with laser-etched labeling * Black anodized finish * Available in standard and high capacity sizes * Direct-fit models Coming Soon * Vented versions for racing * Pressure relief recirculating models that retain emissions * Configurable design to allow for multiple levels of flow * Breather can has threads on the outlet to allow for -12 fitting to be used for recirc applications * Race Breather can has NPT threads for optional filter for enhanced oil vapor separation * Modular and expandable design * Accepts any standard -10 ORB fittings * Supplied with a universal stainless-steel bracket * Multiple mounting orientations * 1/4 in. NPT drain port for easy servicing * Double O-ring reservoir end cap to eliminate leakage * Supplied with two -10 AN fittings * Pressure relief can has overpressure protection to vent to a remote reservoir * All components are serviceable * Breather can is supplied with high-flow air filter element * Simple and effective baffle design

5.0 out of 5 stars ( 1 )

$199.99

—

$499.99

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Base Long Block Crate Engines

BluePrint Pro Series 427 c.i.d. base long block crate engines have the muscle that you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, the BluePrint Pro Series Chevy 427 c.i.d. base crate engine assemblies are dyno-tested and include the dyno sheets. Pro Series 427 base long blocks feature: * 540 hp, 535 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.125 in. bore --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.577 intake/.577 exhaust lift --240 intake/248 exhaust duration @ .050 --112 degree lobe separation * Ignition timing --- Initial timing 10 to16 degrees and total timing 32 to 34 degrees * Valve covers, oil pan, and timing cover * Harmonic balancer

Not Yet Reviewed

$9,999.00

Summit Bucks

BluePrint Engines GM 400 C.I.D. 500 HP EFI Stroker Fully Dressed Long Block Crate Engines

BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker fully dressed long block crate engines put down a whopping 500 hp and 473 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, These assemblies are manufactured under strict tolerances and provide outstanding, consistent results. BluePrint Engines GM 400 c.i.d. 500 hp EFI stroker base fully dressed long blocks crate engines are also dyno-tested and include the dyno sheets. Features include: * BluePrint cast iron block * Cast steel 3.750 in. stroke crankshaft * 5.700 in. long connecting rods * Forged pistons * 10.3:1 compression * Hydraulic roller camshaft, .555 in. lift intake, .576 in. lift exhaust, 236/242 intake/exhaust duration at 0.050 in. lift with 110 degree lobe separation * BluePrint aluminum cylinder heads * Premium single true roller timing set * Dual plane intake manifold

5.0 out of 5 stars ( 1 )

$9,299.00

On Sale

Holley Sniper Fabricated Aluminum Valve Covers

Holley Sniper fabricated aluminum valve covers deliver high-end looks without the high-end price! They're constructed from 6061 T-5 sheet aluminum and precision TIG-welded for a proper fit. Plus, they feature thick one-piece CNC billet flanges for superior sealing. Sniper valve covers are available in your choice of natural or black powdercoat finishes, as well as with or without breather openings—and heights to clear most popular rocker arm combinations. Holley includes mounting hardware for quick and simple installation. Order a pair for fitment on your particular engine application.

4.02 out of 5 stars ( 87 )

$333.95

$134.71

—

$315.95

Improved Racing Oil Pan Baffles

Proper oil pan baffling is critical for improving oil control and reducing oil starvation in high performance engines. Improved Racing oil pan baffles provide effective, track-proven protection against oil starvation for road racing, drifting, autocross, drag racing, and even off-roading and rock crawling. The baffles use trap doors to keep oil around the pickup tube and provide vastly improved oil control over the stock baffles. They are sufficient to prevent oil pressure drops at up to 1.4 sustained lateral Gs in most vehicles. Even semi-dry sump systems suffer from oil aeration when the pickup tube in the oil pan sucks up air, aerates the oil, and fills the dry sump tank with foamy oil. Foamy oil is compressible and results in oil pressure drops when pumped into the engine. Improved Racing baffles help keep more oil around the pickup tube in the oil pan, reducing oil aeration and improving oil pressure. Features and benefits include: * Directional trap door baffling completely encloses the oil pump pickup for maximum protection against oil starvation at high Gs * 100 percent bolt-in, no welding necessary; most are direct replacements for stock steel baffles * Baffle plates with drainback slots help to accelerate the return of oil to the bottom of the sump, while also preventing oil slosh and reducing oil consumption * Reduce the risk of oil starvation when oil levels are low * Work with OE cast aluminum oil pans, often a structural member of the engine block, and are less prone to failure or leaking than sheet metal oil pans * Lightweight aluminum construction * Solid body aircraft rivets used to secure trap doors * Limited lifetime warranty

4.6 out of 5 stars ( 15 )

$29.00

—

$219.00

Mr. Gasket Aluminum Valve Covers

Mr. Gasket aluminum valve covers are fabricated from 100 percent TIG-welded 6061 T-5 aluminum sheeting for a perfect lightweight fit. Available in natural, polished, powdercoat, or anodized finishes, they'll enhance the appearance of any engine compartment. The covers feature an extended sealing lip to positively locate and secure the gasket from moving, eliminating oil leaks. These valve covers can be ordered with plain or finned tops, and each piece includes a 1 1/4 in. diameter breather hole (except where noted). Order the model designed for fitment on your make/model and engine type.

3.92 out of 5 stars ( 80 )

$215.95

—

$357.95

On Sale

Holley Retrofit Oil Pan Baffle Kits for GM LS

Vehicles that endure prolonged sessions of braking, turning, and accelerating need extra protection from oil starvation. That's where Holley retrofit oil pan baffle kits for the GM LS engines come in handy. They are designed to maintain proper oil level at the oil pump pickup during vehicle accelerations, both lateral and linear. The baffle maintains the oil at the oil pump pickup preventing loss of engine oil pressure during maximum cornering in a high performance touring or road racing, as well as under hard acceleration in drag racing vehicles. The baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow towards the oil pump pickup but not away.

4.6 out of 5 stars ( 5 )

$357.95

—

$389.95

$322.15

—

$350.95

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 632 c.i.d. dressed long block crate engines have it all! You'd better take a firm grip, because these beauties run with 815 hp! The engines are a perfect choice for drivable and reliable high-end performance. Additionally, the Pro Series crate engines are manufactured under strict tolerances to provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. The engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 632 c.i.d. dressed crate engines are the way to go! Crate engine features include: * New BluePrint Gen 6 tall deck block * Internal balance * Has a provision for a mechanical fuel pump * One-piece rear main seal * 4-bolt mains * 4.600 in. bore * Forged 4.750 in. stroke crankshaft * Forged H-beam connecting rods * Forged pistons * 10:1 compression * Billet distributor * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration at 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Billet distributor * Aluminum cylinder heads

4.55 out of 5 stars ( 11 )

$17,699.00

—

$20,199.00

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$14,299.00

—

$17,499.00

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP Carbureted Retrofit Long Block Crate Engines

BluePrint Engines Pro Series Chevy LS 427 c.i.d. carbureted retrofit dressed long block crate engines put down a whopping 625 hp and 550 lbs.-ft. of torque! They feature a 30-month/50,000-mile warranty and are the perfect choice for drivable and reliable high-end performance. Additionally, these engines are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced to within 2 grams on a computerized balancer. BluePrint Pro Series long block crate engines are also dyno-tested and include the dyno sheets. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239/255 intake/exhaust duration at .050 in. lift with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * Aluminum single plane intake manifold * Full roller rocker arms * Carburetor * Ignition coil packs * Spark plug wires * Spark plugs * Harmonic balancer

3.0 out of 5 stars ( 2 )

$14,049.00

Philadelphia Racing Products Alternator Brackets

Philadelphia Racing Products alternator brackets are the answer to securely mounting your alternator with ease. Brackets are made from 6061-T6 billet aluminum and are machined to a tight tolerance for a precision fit. Each bracket includes all the necessary spacers and mounting hardware, along with a full instruction sheet. Brackets and spacers are black anodized for long lasting corrosion protection. They're available in numerous configurations; order the model recommended for your application.

4.0 out of 5 stars ( 3 )

$92.99

BluePrint Engines Pro Series Chevy 540 C.I.D. 670 HP Long Block Crate Engines

Enter the realm of pavement-grinding power with the BluePrint Pro Series Chevy 540 c.i.d. long block crate engines. These 670 hp powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 540 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint Block * 4 bolt mains * Forged crankshaft * Forged connecting rods * Hydraulic roller camshaft - Lift = 0.647 in. / 0.647 in. - Duration @ 0.050 in. = 248 / 254 degrees - Lobe Separation = 112 degrees * Double roller timing chain * Aluminum cylinder heads

Not Yet Reviewed

$13,299.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$27,799.00

Sikky Manufacturing LSX Swap Oil Pans

Sikky Manufacturing LSX swap oil pans are made to help simplify your LS swap conversion. These pans are built with a 1/2 in. thick 6061 billet aluminum flange and back plate to provide superior strength that will outlast and outperform other pans available. The 100 percent aluminum design allows Sikky oil pans to be lightweight and extremely durable, unlike flimsy steel sheet metal pans. All pans are tested under rigorous track conditions to ensure that customers are provided with only the highest quality parts for their LS swap. The LSX swap pans are available in a variety of styles—such as front sump and mid-sump—for recommended fitment on specific applications. Most kits include the oil pan, magnetic drain plug, and hardware kit (some factory hardware is utilized).

2.0 out of 5 stars ( 1 )

$531.99

—

$797.96

On Sale

Holley LS Swap 4WD Truck Off-Road Oil Pan Baffles

Holley offers LS swap 4WD truck off-road oil pan baffles for a variety of trucks, including many Chevy and GMC models from the 1970s and '80s. They take Holley's popular cast aluminum oil pans (P/N 302-4 and 302-4BK) designed to swap LS engines into K10s and other trucks to a whole new level. Vehicles that endure prolonged sessions of climbing, crawling, braking, turning, and accelerating need extra protection from oil starvation. That's where these baffle kits come in. They improve upon the baffle included with those pans, maintain proper oil level at the oil pump pick-up during vehicle elevation and grade changes, accelerations, both lateral and linear, and braking. This prevents loss of engine oil pressure during off-road excursions as well as during hard acceleration. Each baffle is fabricated from sheet aluminum joined by TIG-welded joints. Directionally positioned one-way trap doors allow oil flow toward the oil pump pick-up but not away. These direct bolt-in baffles are designed to be used in the Holley P/N 302-4 and 302-4BK LS Swap oil pan with the standard pickup, and are a drop-in replacement for the standard tray baffle. They're great for street, race, and off-road applications.

Not Yet Reviewed

$217.95

$145.21