Engines & Components
Availability
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your daily driver.
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,011.40
—
$3,490.20
Chevrolet Performance LS3 6.2L 376 c.i.d. engine assemblies use an impressive 10.7:1 compression ratio to put out 525 hp at 6,200 rpm and 486 lbs.-ft. of torque at 5,200 rpm. They feature a cast aluminum block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .525 in. intake and .525 in. exhaust valve lift, with a 226 degree intake and 236 degree exhaust valve duration at .050 in. cam lift. Assemblies also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Exhaust manifolds * 14 in. flexplate * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$11,923.08
Building on the features that make the GenX® 255 for GM LS3 great—like 12° valve angles and relocated valves for reduced valve shrouding and improved piston-to-valve clearance—Trick Flow's GenX® 280 HIP cylinder heads withstand the abuse of high horsepower, power-adder performance demanded by today's racers and engine builders. The GenX® 280 heads list of features is long, and it starts with the HIP'd (Hot Isostatic Pressed) castings. This process significantly increases the casting's density for improved tensile and fatigue strength. It continues with industry leading airflow through CNC Competition Ported 280cc intake ports and Trick-Alloy™ powdered metal valve guides for added longevity. Manley Severe Duty intake valves and Extreme Duty Inconel exhaust valves are designed to withstand the abuse of extreme temperatures and stresses of big power adder applications. Trick Flow® by PAC Racing dual valve springs, titanium retainers, .750-inch thick deck, and 6-bolt-per-cylinder mounting pattern round out the features. Trick Flow® GenX® 280 HIP cylinder heads for GM LS3 work with all LS3 intake manifolds and LS9/LSA blower assemblies and fit all LS head gasket and engine block combinations. These cylinder heads are available fully assembled or as bare castings. Sold individually. Key features: * 280cc intake ports and 67cc combustion chambers * HIP'd casting * Accepts 3/8 in. pushrods * Powdered metal valve guides * 2.165 in. NK-844 severe duty stainless steel intake valves * 1.600 in. XH-432 extreme duty Inconel exhaust valves * .750 in. thick deck * 6-bolt configuration * Assembled heads include a Trick Flow® LS3 rocker stand
Not Yet Reviewed
$1,349.99
—
$1,949.99
Trick Flow engineers used the best features of OEM GM LS3 and LS7 cylinder heads, combined with their own race-winning engineering and technology, to create the GenX® 255—the ultimate ultimate square port LS cylinder head for 4.000" and larger bore engines. The heads feature fully CNC Competition Ported runners with a premium high resolution surface finish for maximum airflow and performance potential. Stock LS3 ports accommodate LS3-style intake manifolds and LS9/LSA blower assemblies. The valve angles have been changed from 15° to 12° to increase piston-to-valve clearance and allow the use of larger camshafts. The coolant holes through the head deck were redesigned to work with all LS head gasket and engine block combinations. GenX 255 heads are available with standard or 6-bolt per cylinder mounting patterns. Trick Flow GenX 255 cylinder heads are emissions-legal under CARB E.O. #D-747 for 2007-present GM vehicles with 6.2L engines. They are available fully assembled or as bare castings. Sold individually.
( 7 )
$1,149.99
—
$1,599.99
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. cam lift. Long block crate engines also include: * Ignition coil packs * Spark plug wires * Spark plugs * Intake manifold * Fuel injectors * Throttle body * Front timing cover * Aluminum water pump * Harmonic balancer * Passenger side right hand dipstick and tube
Not Yet Reviewed
$10,317.33
Fit any LS engine with Chevrolet Performance LS3 cylinder heads. Manufactured from aluminum alloy, these GM stock replacement heads are assembled with intake and exhaust valves, stem seals, retainers, springs, and locks. Great cylinder head airflow has always supplied the LS Series with exceptional performance. Retain that performance and save yourself time and worry by replacing your tired cylinder heads with Chevrolet Performance LS3 cylinder heads.
( 4 )
$1,069.03
FLOTEK 276cc LS3 cylinder heads feature as-cast high-flow intake runners that flow significantly better than the stock LS3 heads. The ports are in the stock location, so no special valvetrain parts or rocker arms are required. These heads are 15 degree, which is the same as the stock cylinder heads—no special pistons are required. They will work on any LS block that has a 4 in. bore or larger. FLOTEK 276cc LS3 cylinder heads combine high performance and high quality at a value price. Select from bare or assembled models.
( 2 )
$539.00
—
$774.00
Chevrolet Performance LS3 6.2L 376 c.i.d. 430 hp long block crate engines use an impressive 10.7:1 compression ratio to put out 430 hp at 5,900 rpm and 425 lbs.-ft. of torque at 4,600 rpm. Based on the production LS3 engine, these engines use L92-style rectangular-port heads. They feature a cast aluminum engine block with a nodular iron crankshaft, powdered metal connecting rods, and hypereutectic pistons. The steel hydraulic roller camshaft has a .551 in. intake and .522 in. exhaust valve lift with 204 degrees intake and 211 degrees exhaust valve duration at .050 in. camshaft lift. Long block crate engines also include: * F-body style oil pan, pump and pickup * Harmonic balancer * Front timing cover * Oil Filter
( 5 )
$7,194.63
ATK high performance LS3/L92 25cc as cast aluminum cylinder heads are the perfect budget option for your next LS build. These fully assembled heads are capable of making over 600 hp naturally aspirated out of the box and will come loaded with upgraded components. The springs are set up to be used on up to .650 in. lift camshafts. No reason to swap parts on your new heads when running an upgraded cam! -- Features and benefits: * Bronze valve guides * Dual valve springs for .650 in. max lift * CNC-finished faces and bolt holes for extreme accuracy * 355-T6 high density aluminum * Machined for screw in studs and guide plates * All factory components will fit without modification -- Cylinder Head Specifications INTAKE: * Intake Runner Volume (cc): 252 * Intake Port Location: Standard * Intake Valves Included: Yes * Intake Valve Diameter (in): 2.160 in. EXHAUST: * Runner Volume (cc): 78.8 * Exhaust Valve Diameter (in): 1.600 in. * Exhaust Valves Included: Yes * Exhaust Runner: No * Port Shape: Round * Exhaust Port Location: Standard COMBUSTION CHAMBER: * Combustion Chamber Volume (cc): 69.4 * CNC-Machined Combustion Chamber: No VALVE SPECS: * Intake Valve Angle: 12 degrees (3 degrees rolled) * Exhaust Valve Angle: 12 degrees (3 degrees rolled) * Valve Guides Included: Yes * Valve Guide Material: Manganese Bronze * Valve Seats Machined: Yes * Valve Seat Machine Style: 5-Angle * Valve Seat Material: Chrome Nickle * Valve Stem Seals Included: Yes * Valve Stem Seal Style: Viton® Fluoroelastomer SPRINGS: * Valve Springs Included: Yes * Maximum Valve Lift (in): .650 in. * Spring Pressure Open: 370 @ 1.150 * Spring Pressure Closed: 142 @ 1.800 * Outside Diameter of Outer Spring (in): 1.29 in. * Damper Spring Included: Yes * Number of Springs per Valve: Dual * Retainers Included: Yes * Retainer Material: Chromoly Steel * Locks Included: Yes * Lock Style: 7 Degree ROCKER ARMS: * Rocker Arm Studs Included: No * Rocker Arms Included: N/A * Rocker Arm Nut Thread Size (in): 8 x 1.25 * Rocker Arm Nuts Included: No MISC: * Head Style: Assembled * Cylinder Head Material: Aluminum * Cylinder Head Finish: Natural * Spark Plug Style: Standard * Cover Mounting Style: Standard * Steam Holes Drilled: No * Oiling Style: Through Pushrod * Machined for O-Ring: No * Heat Crossover: No * 10mm Accessory Bolt Holes Machined On Ends of Heads
Not Yet Reviewed
$748.99
Edelbrock Victor CNC 11-degree 6-bolt LS3 cylinder heads are specifically designed for high-horsepower, naturally aspirated, and boosted applications. Utilizing the popular LS 6-bolt design, they are compatible with the GM LSX block and all aftermarket iron or aluminum 6-bolt per cylinder LS race blocks. The design offers increased clamping capacity over the standard factory 4-bolt configuration and greatly improves head gasket sealing, making them ideal for high-compression naturally aspirated engines and high-boost applications. Edelbrock Victor CNC heads are manufactured with premium materials and machined to the industry's tightest tolerances. They have an 11-degree valve angle, copper infiltrated powder metal valve seats, and fully CNC-machined ports for maximum airflow. The machined runners and chambers, along with the valve angle increase overall flow capability, while the revised water jacket design enhances thermal conductivity and tunability. Premium manganese bronze valve guides withstand long wear with emphasis placed on holding precision tolerances on valve seat concentricity, allowing the valves to seal securely, eliminating leak down and increasing cylinder pressure during engine operation. Finally, the .700 in. thick deck and reinforced rocker rails make these cylinder heads ideal for high-horsepower applications.
Not Yet Reviewed
$1,506.95
On Sale
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your LS engine or upgrade existing components. ATK High Performance 260cc LS3 CNC-ported cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Titanium retainers * Spark plug dimensions: 14mm x .708 in. with tapered seat
Not Yet Reviewed
$1,148.99
$1,098.99
ATK offers select parts for your build, including cylinder heads. They use them in their engine combinations and are available to complete your LS engine or upgrade existing components. ATK High Performance 270cc LS3 CNC-ported cylinder head features: * A356 aluminum construction * Stainless steel intake and exhaust valves * Manganese Bronze valve guides * Viton® valve seal * Powder meatal valve seats * Titanium retainers * Spark plug dimensions: 14mm x .708 in. with tapered seat
Not Yet Reviewed
$1,198.99
BluePrint Engines Chevy LS 376 c.i.d. 549 hp EFI LS3-style long blocks are for those wanting maximum horsepower and durability. Every BluePrint engine is dyno-tested for proven results and backed by their exclusive 30-month/50,000-mile warranty. Specs and components for the Chevy LS 376 crate engines include: * New GM 6.2L block * Nodular iron rotating assembly * Forged connecting rods * Hypereutectic pistons * Aluminum cylinder heads -- 72cc chamber -- 2.165 in. intake/1.600 in. exhaust valves * Roller camshaft -- .612 intake/.585 exhaust lift -- 225 intake/238 exhaust duration at .050 -- 113 degree lobe separation * Compression ratio 10.7:1 * LS3 intake manifold * Fuel injection included * 87mm DLT4 BW throttle body * Coil packs * Oil pan * Valve covers * Timing cover * Water pump * Harmonic balancer * Spark plugs and wires
Not Yet Reviewed
$12,449.00
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,868.33
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
Chevrolet Performance LS3 6.2L E-Rod long block crate engines offer a stunning combination of horsepower and efficiency, making them perfect for the race track or just cruising around town in your street rod or muscle car. Features include: * 6.2L LS3 engine with 430 hp and 425 lb.-ft. of torque * Engine wiring harness * Engine control module * Catalytic converters * Exhaust manifolds * Oxygen sensors and sensor bosses * Fuel tank evaporative emissions canister * Air filter * MAF sensor * Accelerator pedal * Instruction manual
Not Yet Reviewed
$10,942.12
ATK High Performance GM 415 LS3 Stroker 620 hp Stage 1 long block crate engines make big horsepower, producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 415 LS3 Stroker 620 hp base engines consist of: * New GM LS3 block * Forged 4340 crankshaft * Forged H-beam connecting rods * Forged 2618 pistons * Chromoly piston rings * Hydraulic roller camshaft * Performance aluminum cylinder heads * OE rocker arms with trunnion upgrade * Timing set
Not Yet Reviewed
$10,598.99
AFR announces the release of new camshafts to complement their 260cc Mongoose LS3 cylinder heads. Whether you drive a Gen5 Camaro or a C6 Corvette, AFR can take your setup from mild to wild with one of these new bump sticks. All grinds are made using a billet steel core and are suitable for factory displacement engines ranging from 5.7 to 6.2. Installation will require the use of a 3-bolt style cam gear and bolts. Mongoose LS3 camshafts are available with different specs and options. Order the model recommended for your year/make and engine application.
Not Yet Reviewed
$626.85
Chevrolet Performance's 525 RLB is based on the LS engine family and is like the 6.2L CT525 but sold as a sealed long block for universal racing sanctioning bodies. The high-revving 525 RLB crate engine is assembled with strong forged pistons and heavy-duty connecting rod bolts designed to support its performance capability and enhance its durability. With its deep-breathing LS3 rectangular-port cylinder heads, it is a combination rated at 533 horsepower at 6,600 rpm and a strong 477 lbs.-ft. of torque at 5,200 rpm, when used with a 4-barrel carburetor and intake manifold, per Chevrolet Performance testing. The engine assembly comes with coil-on-plug ignition and an SFI-certified balancer, along with a 6-quart racing oil pan and more. All that's needed to complete the assembly is an induction and ignition system—and those components are also available from Chevrolet Performance (*refer to installation information noted below). *Installation Notes: Requires addition of induction and ignition control system, starter, fuel system, exhaust system and front accessory drive system The 6-quart racing oil pan is designed to clear most GM rear-steer chassis with stock engine location. The long block is designed for universal racing sanctioning bodies. It is not intended for street use. The 525RLB does not included water pump, intake manifold or factory exhaust manifolds. Chevrolet Performance Racing Long Block engines include factory-installed anti-tampering seals. Technical Specifications: * Engine Type: LS-Series Gen IV Small-Block V-8 * Displacement (cu. in.): 376 (6.2L) * Bore x Stroke (in.): 4.065 x 3.62 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting Rods: Powder metal with ARP bolts * Piston: Forged aluminum * Camshaft Type: Hydraulic roller * Valve Lift (in): .525 intake / .525 exhaust * Camshaft Duration (@.050 in): 226° intake / 236° exhaust * Cylinder Heads: LS3 rectangular port; aluminum as-cast with 68cc chambers * Valve Size (in): 2.165 intake / 1.590 exhaust * Compression Ratio: 10.7:1 Nominal * Rocker Arms (P/N: 12696105 int.): Investment-cast, roller trunnion * Rocker Arms (P/N: 12681275 exhaust): Investment-cast, roller trunnion * Rocker Arm Ratio: 1.7:1 * Recommended Fuel: Premium pump * Maximum Recommended rpm: 6,700 * Reluctor Wheel: 58x * Balanced: Internal
Not Yet Reviewed
$11,756.51
Edelbrock E-CNC 230 LS3 cylinder heads offer efficiency and state-of-the-art technology for high performance street and entry-level racing applications. These cylinder heads have full CNC-ported combustion chambers, intake, and exhaust runners--for improved airflow and an overall potential for increased performance. E-CNC 230 LS3 heads are equipped with high-quality valve springs, raised exhaust port locations, and spark plug angles that are modified to produce a smooth flame front for fuel efficiency and maximum power.
Not Yet Reviewed
$1,421.99
—
$1,880.99
ATK High Performance Chevy LS3 415 short blocks are made to handle serious power. The foundation of any high performance engine is a rock-solid short block, so ATK designed and developed these to be just that. They feature a fully forged, balanced, and blueprinted rotating assembly that is available in a variety of configurations to fit naturally aspirated, nitrous, and forced induction builds, as well as those with 24 and 58-tooth cranks. ATK High Performance Chevy LS3 415 short blocks include the following: * GM LS aluminum blocks * Aligned and hone main bores * Manley 4340 forged crankshaft * 4.00 in. stroke * Manley 4340 H-beam connecting rods * Manley forged pistons
Not Yet Reviewed
$6,998.99
—
$7,498.99
Chevrolet Performance has released its latest factory-engineered LS high-performance engine: the 376/525 LS3 long block. It blends the racing-derived ASA camshaft with the LS3 6.2L production engine to create the most powerful production-based crate engine in Chevrolet Performance's portfolio, delivering 525 hp at 6,200 rpm and 486 lbs.-ft. torque at 5,200 rpm. (For installation in older vehicles, the engine controller kit part number 19354332 is calibrated specifically for this new engine.) Using the LS3 production engine—the same used in Corvettes and Camaros—as the foundation for the LS 376/525 helped keep the retail price lower; while the ASA camshaft is a proven, power-building component that's been successful in the high-RPM world of Circle Track racing. The ASA camshaft is a hydraulic roller with .525-inch lift on both the intake and exhaust sides, along with 226 degrees duration on the intake side and 236 degrees on the exhaust side. Coupled with a tight, 110-degree lobe separation angle, it helps the engine deliver excellent throttle response and breath exceptionally well at high RPM. The cam also gives the LS 376/525 the most aggressive personality among Chevrolet Performance's growing lineup of production-based high-performance crate engines, which also includes the LS 376/480 and the carbureted LS 376/515. Front-end accessories must be obtained separately, along with the engine controller kit. Chevrolet Performance offers several accessory drive kits to suit a variety of applications; and some installations for older vehicles will require the oil pan changed. Engine specifications: * Power: 525 hp at 6,200 rpm, 486 lbs.-ft. of torque at 5,200 rpm * Displacement: 376 C.I.D., 6.2L * Bore x Stroke: 4.060 in. x 3.620 in. * Compression Ratio: 10.7:1 * Recommended Fuel: 92 Octane * Block: Cast Aluminum with 6-bolt cross bolted main caps * Crankshaft: Nodular Iron * Connecting Rods: Powdered Metal Steel * Pistons: Hypereutectic Aluminum * Camshaft: Steel Hydraulic Roller Tappet * Cam Lift: .525 in. Intake / .525 in. Exhaust * Cam Duration at .050 in.: 226 deg. Intake / 236 deg. Exhaust * Lobe Separation: 110 Degree * Cylinder Heads: Aluminum L92 style ports * Combustion Chamber: 68cc * Valves: 2.165 in. Intake/ 1.590 in. Exhaust * Rocker Arms: Cast Roller Trunnion, 1.7:1 Ratio * Balance: Internal * Reluctor: 58X * Maximum GM Recommended RPM: 6,600 * GM Recommended Torque Converter Stall 3000-3400 Engine Includes: -- Fully GM assembled long block -- Oil pump, pick-up and Camaro oil pan (12628771) -- Corvette harmonic balancer -- Front timing cover with cam sensor -- Oil filter -- Passenger side RH oil dipstick and tube (not included) (Note: Does not include oil dipstick tube, oil dipstick, or steam crossover tube.)
( 2 )
$7,988.34
Edelbrock Performer RPM LS3 Top-End kits deliver improved performance in 1,500 to 6,500 rpm street application range. To get great performance out of any engine, all of the components must work together, and for over 30 years, Edelbrock Total Power Packages have solved the parts-matching puzzle. Now, their dyno-matched component Power Package Top-End kits, will get you the best Edelbrock performance in-one-box, under one part number, with "no guesswork" involved. And all of the performance marks are real results from engine dynamometer tests on factory short blocks. Edelbrock Performer RPM LS3 Top-End kits feature: * Performer RPM intake manifold * E-CNC cylinder heads * Pushrods * Rollin' Thunder hydraulic roller camshafts * Complete bolt kits * Edelbrock gasket set * MSD ignition control module Installation notes: * Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. * Use RTV sealant to properly seal end seals--DO NOT USE end seals gaskets * Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage * NPT/pipe thread fittings require the use of PTFE tape or paste on threads to ensure proper seal * DO NOT overtighten NPT/pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/pipe thread is a tapered thread.
Not Yet Reviewed
$5,494.95
Edelbrock Victor LS3 Top-End kits deliver the ultimate in high performance for street/strip applications. To get great performance out of any engine, all of the components must work together, and for over 30 years, Edelbrock Total Power Packages have solved the parts-matching puzzle. Now, their dyno-matched component Power Package Top-End kits, will get you the best Edelbrock performance in-one-box, under one part number, with "no guesswork" involved. And all of the performance marks are real results from engine dynamometer tests on factory short blocks. Edelbrock Victor Jr. LS3 Top-End kits feature: * Victor Jr. intake manifold * Victor cylinder heads * Rollin' Thunder hydraulic roller camshafts with aggressive profiles for maximum power while retaining great drivability * MSD Ignition Control Module Installation notes: * Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. * Use RTV sealant to properly seal end seals--DO NOT USE end seals gaskets * Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage * NPT/pipe thread fittings require the use of PTFE tape or paste on threads to ensure proper seal * DO NOT overtighten NPT/pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/pipe thread is a tapered thread.
Not Yet Reviewed
$5,900.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
