Engines & Components
Availability
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your daily driver.
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 506 )
$12.79
—
$25.99
K&N crankcase vent filters were designed for racing, but they're nice enough for show cars. They come in several styles, with universal mounting abilities to fit a wide variety of valve covers. Some styles also have shields for extra protection. The top plates and shields are chrome plated for beauty and durability, and some inlet tubes are zinc plated. The reliable filter elements are reusable, washable, and come pre-oiled, ready for use. They can be covered by up to 1/4 in. of debris before airflow restriction makes cleaning them necessary.
( 276 )
$18.99
—
$55.99
K&N offers oil catch cans for a variety of cars and trucks from the early 2000s and up. These air oil separators protect the engine and intake tract from blowby by capturing the oil in K&N's industry-leading high-capacity reservoir. This also helps prevent power loss. The separators are easy to install in about 30 minutes with basic tools and use factory-style hose connections to quickly snap on and off. These units replace the factory line from the crank case, allowing the oil separator to be mounted to a convenient location in your engine bay. No tools are needed to check and empty the oil collector reservoir. Order the model recommended for your vehicle. Product details: * Designed to protect the engine from oil contamination due to blowby * Helps protect against power loss and premature detonation * Engineered to reduce build-up of oil and contaminants in your intake tract * Premium OEM-style connectors and robust hoses * Large 6 oz. capacity reservoir; no tools needed to check and empty * Direct-fit to application (vehicle-specific)
( 17 )
$126.39
—
$157.99
K&N reusable synthetic crankcase vent filters are manufactured with a non-oiled, synthetic woven media to assist with capturing excess oil blowby and provide a more breathable filtration surface for escaping crankcase vent gases.
( 37 )
$14.99
—
$20.99
K&N premium oil filters for powersports vehicles utilize an innovative, highly efficient synthetic-blend filtration media designed to be compatible with synthetic, petroleum-based, and blended oils, including the high concentrations found in synthetic racing oils. The heavy-duty canister is engineered to be exceptionally durable, and a 17mm welded hex nut can be used for quick and easy filter removal. Engineered to support exceptionally high flow rates while providing outstanding protection from harmful engine contaminants, each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers. For a high-performance design with outstanding filtration, order the K&N premium powersports canister oil filters best suited for your application. More product features include: * Pleated synthetic-blend filtration media * Pre-drilled nut for safety wire attachment * Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength * Designed to operate with all synthetic, conventional, and blended motor oils
( 94 )
$14.39
—
$19.99
K&N Select Oil Filters have been specially designed for professional installers and service providers. Their high-flow design can help to improve engine performance by reducing oil filter restriction. The filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Select Oil Filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional, and blended motor oils. The pleated media provides high capacity, making them suitable for extended oil change intervals (when used in accordance with the vehicle and motor oil manufacturers' recommendation). K&N Select Oil Filters are available for canister and cartridge type oil filter applications. They're offered in a variety of heights, outside diameters, and thread sizes. Some models include a filter bypass relief valve and/or anti-drainback valve.
( 1 )
$10.99
These K&N cartridge oil filters are designed to satisfy the needs of racers and engine builders, as well as the average vehicle owner who wants the best oil filters available. K&N cartridge oil filters trap harmful contaminants, while the filters' construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards.
( 1 )
$14.99
—
$18.99
K&N Powersports oil filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. These filters trap harmful contaminants while their design allows for high oil flow rates. They are covered by K&N's limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals. For a high-performance design with outstanding filtration, order the K&N Powersports cartridge oil filters best suited for your application. More product features include: * High-efficiency media with uniform pleats * Ideal for high-end synthetic motor oil
( 27 )
$9.59
—
$15.99
Clearance
K&N Performance Silver oil filters embody the spirit of NASCAR performance racing with their new, sleek canister design and filtration media. They feature a black fluted canister with stronger sidewalls for higher burst strength, and a newly engineered filter media that provides outstanding filtration and flow. This allows for a high volume of clean oil to keep your engine lubricated and protected from harmful contaminants. The filters also come with a pressure relief valve, nitrile rubber anti-drainback valves (where applicable), and rolled threads to help prevent stripping when installing them. K&N Performance Silver oil filters are co-labeled with the K&N and NASCAR logos and are designed for removal with a traditional oil filter wrench.
( 6 )
$59.99
$39.50
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$20.99
—
$402.99
For some engines, the softer and more conformable nature of aluminum is preferable to the stiffer characteristics of the steel backings used for many bearings. Clevite AL-Series main bearings offer the features found in OE-type aluminum bearings, combined with the distinct advantages of proven Clevite know-how. That includes things such as carefully chosen eccentricities tailored to the application, and that means solid, reliable performance. Clevite AL-Series main bearings are a great choice for anything from OEM-style rebuilds to mild performance applications. Clevite recommends these main bearings for most engines using a cast crankshaft.
( 10 )
$23.99
—
$237.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$10.99
—
$65.99
Mahle has you covered for all your oiling system needs. Mahle Original oil pumps meet or exceed OEM standards for quality and function. They are available in stock pressure and volume, as well as high-pressure and high-volume for select applications. Mahle Original oil pumps are available for a variety of domestic and foreign car and truck applications.
( 2 )
$35.99
—
$204.99
More and more manufacturers have shifted to aluminum bearings in their OE engines and Clevite AL-Series rod bearings are designed to be the highest-quality replacement bearings in the industry. They carry on the tradition and reputation that Clevite has built throughout the course of time. AL Series engine bearings feature a 100 percent lead-free aluminum silicon bi-metal material, which includes 60 percent more silicon than the leading competitor's bi-metal material for better conditioning of journal surfaces. These bi-metal bearings also offer greater wear resistance than the leading competitor's bi-metal material, as well as greater seizure resistance. Clevite AL-Series bearings feature 100 percent bored inside diameters for precision and surface characteristics and, where appropriate, straight-shell main bearings utilizing an "umbrella" groove that allows for superior oil control and improved pressure.
( 26 )
$7.99
—
$44.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
ATK High Performance Chevy Gen V LT1 416 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons, and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters plugged. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 4.000 in. * Displacement (cu.in): 416 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +10cc or +20cc dished * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
ATK High Performance Chevy 632 short blocks are based on dyno proven combinations built with name brand parts. Each short block is hand-built and inspected for precision tolerances. Rotating assemblies are balanced; and stroker builds are oversize of stock bore and stroke. Short blocks are shipped strapped on a wooden pallet crate. Engine Specifications: * Block: Dart Big M Sportsman 4-bolt main 2-piece rear main seal * Bore/Stroke: 4.600 in. x 4.750 in. * Displacement: 632CI * Crankshaft: Scat 4340 forged internally balanced * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: 2618 forged +3.4cc flat tops * Compression ratios: 112cc = 11.3:1 / 118cc = 10.8:1 / 121cc = 10.6:1 (can vary due to deck height/gasket thickness) * Rings: Plasmamoly * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer: Internal balance * Flexplate / Flywheel: Internal balance * Head gasket: .038 in. or per application Engine Info: * Oil: 10W30 Conventional / Non-Synthetic for first 3,000 miles * Oil filter: Wix or K&N per application * Head gaskets: .038 in. or per application
Not Yet Reviewed
$7,526.99
ATK High Performance Chevy Gen V LT1 376 short blocks are built for naturally aspirated engines, boost or nitrous. ATK starts with a new GM LT block and outfits it with a Manley 4340 forged crankshaft, H-beam rods with ARP2000 bolts, Manley 2618 forged pistons and Total Seal CS AP ring package with steel top rings. These short blocks will have the factory piston squirters installed. Engine Specifications: * Block: New GM LT1/LT4 * Bore/Stroke: 4.065 in. x 3.622 in. * Displacement (cu.in): 376 c.i.d. * Crankshaft: Manley 4340 forged 58-tooth reluctor wheel * Rods: Manley 4340 forged H-beam 6.125 in. ARP 2000 bolts * Pistons: Choice of 2618 forged +12cc dished or -2cc domed * Rings: Total Seal CS AP steel top ring with Napier 2nd ring set * Camshaft bearings: Installed and clocked to OEM position * Freeze plugs: Installed and sealed * Oil galley plugs: Installed and sealed Recommended Components: * Balancer -- Internal balance * Flex plate / Flywheel -- Internal balance * Head gasket: .051 in. or per application * Oil pump: Factory Engine Info: * Oil: 5W30 non-synthetic for first 3,000 miles * Oil filter: Wix or K&N, per application
Not Yet Reviewed
$6,998.99
Continental ContiTech hex double V-belts are designed for use on drives with one or more reverse bends. They usually transmit power from both sides of the belt. To meet the multiple-bend and dual power requirements, ContiTech hex belts are built with rugged Vyacord tension members—delivering maximum strength with minimum elongation. They work together with all the other quality hex belt materials to ensure maximum performance over a long, trouble-free life. Check your pulleys and make sure they're good to go; if not, choose from Continental's C-Section pulleys for great drive results.
Not Yet Reviewed
$216.99
—
$284.99
Continental Accu-Drive tensioners are designed so that the belt tension, frictional damping, and amount of belt take-up are ideal for your application. All Continental Accu-Drive automatic belt tensioners meet or exceed OEM specifications for all major car manufacturers.
( 29 )
$40.99
—
$126.99
Do you have a rounded-off, stripped, or leaking drain plug? If so, then pick up one of these Dorman oil pan drain plugs. Designed and constructed to strict engineering quality standards, they are high-quality OE replacements coated for corrosion resistance and a long service life. Dorman's oversized, piggyback, and rubber expanding plugs eliminate the need to replace the entire pan, saving you time, labor, and money.
( 74 )
$2.99
—
$55.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
