Engines & Engine Parts

Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched...

Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your...

Showing In Stock Items. Show All 15 Items.

Individual Parts

Part Groups

Results 1 - 5 of 5

Turbosmart ProOPR Rising Rate Turbo Oil Pressure Regulators

Turbosmart ProOPR regulators are designed for large turbocharger systems and high boost levels where additional pressure and confidence is required at high boost, high shaft speed, and horsepower levels. These rising rate oil pressure regulators are boost referenced, not unlike your fuel pressure regulator, and allow lower oil pressure at lower boost pressures and increase oil supply pressure to the bearing system at higher boost levels. Turbosmart ProOPRs feature a twin outlet system that also creates a "T" in your turbocharger oil supply line for simplicity of plumbing and connection for up to two turbochargers. And while they have a returnless inline design, they use a boost reference to create a pressure differential, targeting the appropriate bearing pressure at low and zero boost pressure to eliminate your turbocharger digesting oil, while also providing increased oil pressure at higher boost levels to provide increased protection and confidence. Additional features: * Aluminum (6262 T-6) anodized body and valve * 1/8 in. NPT sensor/gauge port * 1/8 in. NPT boost reference port * 4 AN inlet * 1/8 in. NPT regulated oil outlets

Not Yet Reviewed

$219.95

Melling Performance PRO-Line Pushrods

Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.

4.42 out of 5 stars ( 12 )

$10.99

—

$18.99

Chevrolet Performance L8P 6.6L 400 C.I.D Engine Assemblies

By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.

Not Yet Reviewed

$8,948.80

Chevrolet Performance SP350 385 HP Turn-Key Long Block Crate Engines

You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)

Not Yet Reviewed

$12,667.94

King HP-Series Cam Bearings

King HP-Series cam bearings are precision-machined to tight tolerances to control installed oil clearances, reducing operating bearing pressure. These cam bearings are constructed from seamless steel tubing with a thin layer of lead based babbit material to reduce microscopic deflections. The babbit is quickly cooled in the casting process to achieve a very fine grain structure, doubling tensile strength, therefore, the HP-Series offers much more fatigue strength than conventional bearings, and can withstand racing spring loads, while maintaining the excellent surface characteristics of babbit. King also offers HP-Series bearings with a fluoropolymer coating. Bearings with this coating retain engine oil on the surface, even under extreme heat and pressure—a great advantage! Plus, being a lubricant, it provides backup during start-up and in the event of momentary oil starvation. Use track-tough King HP-Series cam bearings in your engine—and experience the difference.

3.82 out of 5 stars ( 17 )

$59.99

—

$212.99

Page 1 of 1