Engines & Engine Parts at Summit Racing

Clearance

ATK High Performance Chrysler 5.7 Gen III Hemi 400 HP Long Block Crate Engines

ATK High Performance Chrysler 5.7 Gen III Hemi 400 hp long block crate engines were built in a team effort with Comp Cams. Utilizing ATK remanufactured GEN III 5.7L Hemi engines; they upgraded the camshaft, springs, and pushrods to produce reliable 400+ hp. Features typically include: * Seasoned OE Gen III Hemi block * OE reground crankshaft * OE reconditioned connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Aluminum cylinder heads * OE shaft mount rocker arms

3.25 out of 5 stars ( 4 )

$4,798.99

$4,299.50

—

$4,798.99

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$26,799.00

—

$26,899.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 610 HP EFI Deluxe Dressed Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$18,799.00

—

$18,899.00

BluePrint Motorsports Pro Series Mopar 426 C.I.D. 610 HP EFI Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$16,899.00

BluePrint Engines Pro Series Mopar 426 C.I.D. 872 HP Base Long Block Crate Engines

BluePrint Engines Pro Series Mopar 426 c.i.d. Base dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2

Not Yet Reviewed

$24,299.00

On Sale

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.81 out of 5 stars ( 68 )

$4,189.99

$3,351.99

—

$4,189.99

On Sale

Summit Racing™ 1966-72 Mopar B-Body 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1966-72 Mopar B-Body EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, and polyurethane transmission mounts, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Mopar B-Body. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$17,417.29

—

$19,417.29

$17,367.67

—

$19,367.67

On Sale

Summit Racing™ 1970-74 Challenger and Barracuda Mopar 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1970-74 Challenger and Barracuda Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time you would have spent trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your vehicle. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap headers, along with Lakewood engine mounts. A Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Challenger or Barracuda. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor with either black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Cam specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$17,755.24

—

$19,755.24

$17,671.82

—

$19,671.82

On Sale

Summit Racing™ 1972-93 Dodge Truck Mopar 426 C.I.D. 610 HP EFI Engine Swap Pro Packs

Our Summit Racing™ 1972-93 Dodge truck Mopar EFI engine swap Pro Packs deliver engineered swap systems that eliminate the guesswork and doubt, while saving you the time trying to match up universal parts. We've brought together Hooker, Lakewood, and BluePrint engines, creating a package of power and performance for your truck. Each Pro Pack contains Hooker BlackHeart engine mount brackets, transmission crossmember, polyurethane transmission mounts, and 304 stainless steel Gen III Hemi swap mid-length headers, along with Lakewood engine mounts. A BluePrint Chrysler Hemi-compatible 426 c.i.d. ProSeries fuel-injected engine, base dressed or deluxe dressed, completes the package. Select the Summit™ engine swap Pro Pack desired for your Dodge truck. Notes: * Base dressed ProSeries engine includes water pump * Deluxe dressed ProSeries engine includes spark plugs and front accessory drive with water pump, alternator, power steering pump, and A/C compressor available with black or polished pulleys Engine specs: * 610 hp/525 lb.-ft. torque * Compression ratio: 10.48:1 Block: * New "BGE" Hellcat engine block * 4-bolt main * 4.090 in. bore * One-piece rear main seal Rotating Assembly: * Forged steel crank * 4.050 in. stroke * 6.125 in. connecting rods * Forged pistons * Internally balanced front and rear Cylinder Heads: * Gen III Hemi Apache aluminum cylinder heads * 73cc chamber * 2.140 in. intake/1.650 in. exhaust valves Camshaft specs: * Hydraulic roller cam * .610 intake/.611 exhaust lift * .614 intake/.614 exhaust lift (base dressed) * 231 intake/255 exhaust duration at .050 in. * 113-degree LSA * 115-degree LSA (base dressed) Ignition timing: Controlled by ECU Also included with engine: * Fuel injection * Throttle body * Fabricated intake manifold * Harmonic balancer * Muscle car-style mid-sump swap oil pan * Coil(s) * Timing cover (Car) * Valve covers * Holley Terminator ECU controller kit and wiring harness

Not Yet Reviewed

$17,504.09

—

$19,504.09

$17,481.07

—

$19,481.07

ICON Premium Forged Piston and Ring Kits

You don't need a king's ransom to rule the track. ICON premium forged piston and ring kits deliver high performance racing pistons crafted from high-strength 2618 primary aluminum alloy and matched with performance rings, creating remarkable value-packed kits. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple wound spiral lock rings, and their proprietary diamond-finished skirts. Heavy-duty ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! ICON premium forged pistons and ring kits will help you reign victorious without spending a lot of cash.

4.56 out of 5 stars ( 18 )

$798.99

—

$931.99

March Performance Mopar Crate Hemi Serpentine Pulley Kits

Are you tired of your low performance factory V-belt pulleys? These March Performance Mopar crate Hemi serpentine pulley kits are designed to replace your low-quality V-belt pulleys, while retaining your standard rotation water pump. They are a great way to make your engine compartment look showroom-fresh. These kits are simple to bolt on and are an easy way to increase horsepower, as well as eliminate belt throw. They are made from high-quality billet aluminum and have been hard coated for extra strength and performance. They have also been given a clear powdercoat to ensure long-lasting shine and durability. There's no question that these March Performance Mopar crate Hemi serpentine pulley kits are some of the best pulleys on the market.

Not Yet Reviewed

$314.99

COMP Cams Chrysler Hemi Phaser Camshafts

COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.

3.4 out of 5 stars ( 5 )

$605.95

ATI Super Damper Standard Harmonic Balancers

Patented ATI Super Damper standard harmonic balancers are the only crankshaft dampers designed exclusively for high performance engines. Inner and outer shells are available in aluminum or steel, and contain a steel inertia weight. The inertia weights have six (2-ring design) or eight (3-ring design) computer-machined grooves to retain the proper durometer O-rings (dyno tested for each application). Whether you race or just drive on the street, ATI harmonic balancers are the perfect choice. Features include: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * OEM equipment on a variety of crate engines * Tunable, rebuildable, and extremely efficient at all rpm * Laser-engraved 360 degree timing marks * Supercharger and power steering drive pulleys available for some applications

4.6 out of 5 stars ( 230 )

$358.40

—

$473.75

ATI Super Damper Serpentine Series Harmonic Balancers

ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks

4.77 out of 5 stars ( 233 )

$372.98

ARP High Performance Series Cylinder Head Bolt Kits

ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.

4.8 out of 5 stars ( 1023 )

$262.99

ICON Premium Forged Pistons

ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!

4.79 out of 5 stars ( 43 )

$712.99

—

$828.99

ATI Super Damper Harmonic Balancer Shells

ATI Super Damper harmonic balancer shells are specifically designed for high-rpm engines. Their proven elastomer is engineered and tuned to eliminate damaging crankshaft harmonics that cause parasitic horsepower loss. These damper shells are built to all-but-eliminate worn parts and timing problems. These are the shells only and must be used with an ATI hub, which is sold separately. Order the model recommended for your vehicle application.

4.18 out of 5 stars ( 17 )

$342.80

March Performance Crankshaft Pulleys

March Performance crankshaft pulleys are CNC-machined to run true. These pulleys are available in both standard and underdrive sizes. Underdrive pulleys help to increase horsepower by reducing accessory pulley rotation effort at the crankshaft.

4.75 out of 5 stars ( 235 )

$99.99

—

$139.99

March Performance Chrysler 383 and 440 Serpentine Conversion Kits

March Performance Chrysler 383 and 440 serpentine conversion kits simply swap out with your old low-performance V-belt pulleys with a 1 in. wide serpentine belt drive system. Not only will they eliminate belt throwing, March high water flow ratio pulleys will also improve cooling. These high-performance pulley kits are precision CNC-machined from solid billet 6061-T6 aluminum, and then polished and clear powdercoated for a no-polish, maintenance-free finish.

4.5 out of 5 stars ( 8 )

$609.99

—

$936.99