Engines & Engine Parts at Summit Racing

Go Fast Bits DV Plus Diverter Valves with TMS Advantage

Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost

5.0 out of 5 stars ( 6 )

$173.70

Go Fast Bits External Wastegates

GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001

Not Yet Reviewed

$422.01

Go Fast Bits Lightweight Underdrive Pulley Kits

Go Fast Bits lightweight underdrive pulley kits are made from aircraft-grade 6061 T-6 aluminum, anodized black for a stealthy appearance with superior wear resistance, and lightened to offer faster acceleration through significant weight reduction. GFB pulley kits are designed to improve acceleration by reducing the rotational mass (inertia) on the crankshaft as well as parasitic loads from the driven accessories. The effect is similar to a lighter flywheel, and the engine feels livelier and more willing to rev. Concerned about possible adverse effects of lightweight pulleys and underdriving? Rest assured GFB has done their homework. The underdrive ratios have been optimized to ensure there are no adverse effects on the performance of the accessories, and while it is true that some engine types do suffer harmonic issues from lightweight pulleys, GFB steers clear of those. Go Fast Bits kits are thoroughly application tested and do not cause engine damage in the short or long term.

Not Yet Reviewed

$342.81

ACDelco Gold Oil Filters

An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters

4.57 out of 5 stars ( 159 )

$10.99

Wiseco 4-Stroke Piston Rings

Manufactured to the highest standards to outperform the competition, Wiseco 4-stroke piston rings maximize your performance and keep you firing on all cylinders. These rings are crafted from various metals and with specific finishes for both street and track. Designed to underscore piston lubrication, reduce bore friction, and optimize the heart of your engine, Wiseco rings improve the overall function of your pistons and powerplant. The 4-stroke rings are intended for use in cast iron, NikaSil, boron composite, and electrofusion bores; certain rings are designed for limited coatings, such as the XJ with chrome bores and the XN with NikaSil bores. Match up the specs from your motorcycle with the size and type of piston ring replacements you need. You can always depend on race-proven Wiseco technology!

4.5 out of 5 stars ( 16 )

$28.99

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

BluePrint Engines Pro Series Chevy 427 C.I.D. 540 HP Dressed Long Block Crate Engines

Does your car need more power? Of course it does! Install 540 hp and be the envy of the block. BluePrint Engines Pro Series 427 c.i.d. dressed long block crate engines have the muscle you need to impress. These powerhouses feature a 30-month/50,000-mile warranty and they are the perfect choice for drivable and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series crate engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 427 c.i.d. dressed crate engines are the way to go! Features include: * BluePrint Engines cast iron block * 4340 forged crankshaft * 4340 forged connecting rods * Forged pistons * 9.5:1 compression * 4.125 in. x 4.000 in. bore/stroke * Hydraulic roller camshaft * Double roller timing chain * 64cc chamber aluminum cylinder heads * 1.6 ratio rocker arms * Carburetor * Billet distributor

5.0 out of 5 stars ( 5 )

$11,199.00

BluePrint Builder Series LS376/530HP Standard Edition EFI Crate Engine and 4L65/70E Trans Combos

BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a black pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.

Not Yet Reviewed

$23,499.00

BluePrint Engines Pro Series Chevy 454 C.I.D. 563 HP Dressed Long Block Crate Engines

For those wanting maximum horsepower and durability that's pretty much ready to go, BluePrint Engines Pro Series Chevy 454 c.i.d. 563 hp dressed long block crate engines are right for you. In addition, every BluePrint engine is dyno-tested to make sure they hit their target horsepower and torque. Pro Series 454 dressed long blocks feature: * 563 hp, 545 ft.-lb., compression ratio 10.0:1 * BluePrint cast iron block with 4-bolt main --4.250 in. bore --1-piece rear main seal --Mechanical fuel pump provision --Passenger side dipstick --Drilled and tapped for clutch linkage * Forged crankshaft and connecting rods * Forged pistons with rings * Internal front/internal rear balanced rotating assembly * BluePrint aluminum cylinder heads --64cc chamber --2.08 in. intake/1.60 in. exhaust valves --220cc intake/67cc exhaust runners * Hydraulic roller cam --.638 intake/.622 exhaust lift --251 intake/259 exhaust duration @ .050 --114 degree lobe separation * Valve covers, oil pan, and timing cover * Harmonic balancer * MSD Pro billet distributor * 950 cfm carburetor * Aluminum intake manifold

1.0 out of 5 stars ( 1 )

$11,599.00

Trick Flow® PowerPort® 175 Cylinder Heads for Ford 390-428

Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.

4.89 out of 5 stars ( 9 )

$1,099.99

—

$1,574.99

BluePrint Motorsports Pro Series Chevy 632 C.I.D. 815 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 632 c.i.d. dressed long block crate engines have it all! You'd better take a firm grip, because these beauties run with 815 hp! The engines are a perfect choice for drivable and reliable high-end performance. Additionally, the Pro Series crate engines are manufactured under strict tolerances to provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. The engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 632 c.i.d. dressed crate engines are the way to go! Crate engine features include: * New BluePrint Gen 6 tall deck block * Internal balance * Has a provision for a mechanical fuel pump * One-piece rear main seal * 4-bolt mains * 4.600 in. bore * Forged 4.750 in. stroke crankshaft * Forged H-beam connecting rods * Forged pistons * 10:1 compression * Billet distributor * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration at 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Billet distributor * Aluminum cylinder heads

4.55 out of 5 stars ( 11 )

$17,699.00

—

$20,199.00

Summit Racing™ Oil Pumps

Don't waste time installing a generic oil pump when you can get a high-quality Summit Racing™ pump that's ready to go. The high volume pumps deliver 20-25 percent more oil than the standard volume pumps, and are pressure-tested and hand-turned to guarantee performance. Available in iron and nodular iron for most applications.

4.64 out of 5 stars ( 186 )

$46.99

—

$93.99

BluePrint Engines Pro Series Chevy 572 C.I.D. 745 HP Dressed Long Block Crate Engines

BluePrint Pro Series Chevy 572 c.i.d. dressed long block crate engines are loaded with 745 hp for tire-ripping power! They feature a 30-month/50,000-mile warranty. These engines are the perfect choice for drivability and reliable high-end performance. Additionally, these assemblies are manufactured under strict tolerances and provide outstanding, consistent results. All of the rotating assemblies are balanced within 2 grams on a computerized balancer. BluePrint Pro Series engines are also dyno-tested and include the dyno sheets. For high-horsepower, big displacement engines, BluePrint Pro Series Chevy 572 c.i.d. dressed crate engines are the way to go! Features include: * New BluePrint tall deck * 1 piece rear main seal * 4.500 inch bore * Forged crankshaft * Forged connecting rods * Forged pistons * Hydraulic roller camshaft - Lift = 0.698 in. / 0.698 in. - Duration @ 0.050 in. = 272 / 282 degrees - Lobe Separation = 110 degrees * Double roller timing chain * Aluminum cylinder heads * Billet distributor * Carburetor

5.0 out of 5 stars ( 1 )

$15,799.00

Jesel 2-Piece Upper Pulley Belt Drive Systems

Jesel 2-piece upper pulley belt drive systems are not just built to survive, they are built to thrive. These often-duplicated, but never-matched Jesel pulley belt drive systems are the most accurate and durable cam timing systems available. They are made with the finest materials and coatings, and then precision CNC-machined to go the distance in any race—and still be ready for more! Infinitely adjustable and track-proven to outlast chain drives, these upper pulley belt drive systems also can reduce the number of harmonics being transferred to the camshaft. Order the Jesel 2-piece upper pulley belt drive system that is designed to fit your needs. 2-piece upper pulley belt drive system features include: * 2024-T6 billet aluminum Spider * Heat-treated steel crank pulley * PTFE coated high-vacuum cam and crank seals * Grade 8 hardware * Patented HTD reinforced belt * Easy, accurate external cam timing adjustment

4.88 out of 5 stars ( 8 )

$1,195.00

—

$1,840.00

Summit Racing™ Pro SBC LS Firing Order Hydraulic Roller Camshafts

Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages, from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. By utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways. The benefits include improved combustion chamber cooling for reduced detonation, more power and torque gains, better mixture distribution, along with reductions in vibration and bearing wear. Best of all—these Pro SBC LS firing order hydraulic roller retrofit cams are precision ground in the USA on USA Billets! Order the cam for your application needs.

4.71 out of 5 stars ( 14 )

$269.99

—

$279.99

ATK High Performance GM 350 390 HP Stage 3 Long Block Crate Engines with EFI

ATK High Performance GM 350 390 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. They are dyno-tested with your EFI system and ready to go! Typically ATK GM 350 390 hp complete long block engines consist of: * Seasoned OE block with 4-bolt mains * OE cast crankshaft * OE powder metal connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * ATK High Performance aluminum cylinder heads with 2.020 in. /1.600 ex. valves * Billet roller rocker arms * Timing set * Oil pan, oil pump and pick-up tube * Valve covers * Flexplate * Performance intake manifold * Distributor HEI * Long water pump * Front damper * FiTech Go Street Electronic fuel injection 400hp * Spark plugs and wires * Dyno test/tune

Not Yet Reviewed

$5,398.99

Edelbrock E-210 Cylinder Heads

Step up to race-level performance with OEM compatibility using these Edelbrock E-Series E-210 aluminum cylinder heads. They feature larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts--perfect for spec series racers and large-displacement engines. Available bare or assembled, E-210 cylinder heads allow you to use off-the-shelf headers and hardware. Forget those overseas castings; go with quality, economy, and performance. Go with Edelbrock E-Series E-210 cylinder heads.

4.92 out of 5 stars ( 13 )

$1,654.95

Vibrant Performance Gen 3 Catch Cans

Vibrant Performance is excited to introduce their new Gen 3 catch cans. This latest evolution of Vibrant's popular catch can program offers something for every conceivable vehicle, making it easy to assemble a truly custom and fully modular set up for any application. Whether your set up requires a small (0.75L), medium (1.5L) or large (2.0L) catch can, Vibrant Performance has got you covered. If you need to go even larger, you can assemble a customized dual can assembly that can provide you with up to a 4.0L total capacity. These aluminum black anodized catch cans are offered with your choice of a 2-port or 4-port thread-on lid. The 2-port version features an integrated stainless steel vent, eliminating the need for an external breather filter for venting to the atmosphere. The 4-port configuration provides users the ability to recirculate the filtered air for a closed-loop set-up. Order the model for your application needs.

5.0 out of 5 stars ( 3 )

$247.99

—

$299.99

BluePrint Builder Series LS376/510HP Standard Edition EFI Crate Engine and TKX Transmission Combos

BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 510 horsepower, this standard edition builder series includes a polished pulley kit and T56 manual transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this engine assembly produces 440 lbs.-ft. of torque. When you need or want a new powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/510HP Standard Edition EFI crate engine and TKX trans combos. Product description and specifications: Block: * High strength cast iron (LSX Style) block * Increased deck thickness and strength webbing * Utilizes OEM LS3 front and rear covers * Improved water jacket design * Extended cylinder skirt * One-piece rear main seal * Priority main oiling * 4.0662 in. Bore * 6-bolt main Rotating Assembly: * Nodular iron crankshaft * 3.622 in. stroke * 6.098 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Internally balanced front and rear Cylinder Heads: * BluePrint LS3 aluminum cylinder heads * 69cc chamber * 2.165 in. intake/1.590 in. exhaust valves * 259cc intake/102cc exhaust runners Cam Specs: * Hydraulic Roller Cam * 0.612 Intake/0.585 Exhaust Lift * 225 Intake/238 Exhaust duration * @.050-113 Degree Lobe Separation Ignition Timing: * Ignition Timing and Spark Advance are Controlled by BluePrint Engine Calibrated ECU * Transmission Controller Required if pairing to an automatic (ECU Does Not Offer Transmission Control) Other parts: * Drive-by-Wire throttle body * LS3 cast aluminum intake manifold * LS Swap oil pan * Water pump * Engine harness and ECU Kit * Injectors and Fuel Rail Kit * Spark plugs and wiring * Harmonic balancer * Timing cover * Valve covers * Coil packs * Gas pedal Notes: This engine requires a non-weighted flex plate such as (BPP12654640) / flywheel (BPPLS1611). Recommended fuel: 91 Octane. BluePrint Engines recommends a 2200+ RPM stall converter. Retro fit oil pan will fit most 1955-1995 GM front engine, RWD, V8 cars. Not for use in pollution-controlled vehicles or in dry sump applications. The BluePrint Engines LS controller package contains a fully tested, calibrated, locked ECU, optimized for this specific engine. This package has undergone extensive testing for performance, reliability and the safety of you and your engine.

Not Yet Reviewed

$21,899.00

BluePrint Builder Series 632/815HP Standard Edition EFI Crate Engine and 4L80E Transmission Combos

BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.

Not Yet Reviewed

$30,999.00

Harland Sharp Original Roller Rockers

If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.

4.62 out of 5 stars ( 181 )

$24.50

—

$999.99

Ford Performance Parts Oil Filter Adapters

Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.

4.43 out of 5 stars ( 21 )

$154.99

Summit Racing™ Pro SBC LS Firing Order Hydraulic Roller Cam and Lifter Kits

Summit Racing™ Pro SBC LS firing order hydraulic roller retrofit cams are available in seven stages--from a small smooth idle cam capable of towing, to a big duration stomper that's ready to go bracket racing. Utilizing the LS firing order on a traditional small block Chevy improves the engine in several ways, including exhaust sound and harmonic improvements. These kits include a premium camshaft and drop-in link bar style hydraulic roller lifters. Best of all: these Pro SBC LS firing order hydraulic roller retrofit cams are precision-ground in the USA on USA billets! Order the cam recommended or your application.

3.0 out of 5 stars ( 2 )

$941.83

Trick Flow® DHC™ 200 Cylinder Heads for Small Block Chevrolet

Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.

5.0 out of 5 stars ( 2 )

$949.99

—

$1,299.99