Engines & Components
Availability
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your daily driver.
Turbosmart billet turbo oil feed filters make sure your turbocharger is always fed clean oil. With small oil galleries, it's highly important for the turbo to avoid any debris that may become dislodged from the engine—and a washable 44 micron filter screen element ensures even the smallest particles are kept away from the turbo. These inline filters are suitable for direct fitment onto the outlet of an OPR. They are available in a variety of AN inlet/outlet sizes to accommodate your application.
( 5 )
$47.95
ICT Billet dual outlet oil feed 90 degree adapter plates are fabricated from thick 1 in. aluminum. They include O-ring seal and bolts, but do not require a gasket. Some styles are etched with the ICT logo.
( 3 )
$34.99
—
$58.99
Holley Performance offers block-off kits for T4 wet cooler feed ports. They're ideal for LT4 engine applications, such as those found on Corvette and Camaro applications from 2015 and up. The engine water pump aluminum block-offs are red anodized for protection.
Not Yet Reviewed
$26.35
Summit Racing™ high-pressure connector fuel feed pipes maintain the steady flow of high-pressure fuel from the fuel rail to the injector body. These direct replacement tubes are ideal for eliminating fuel leaks from the fuel rail to the injector, and preventing loss of engine power or mileage. They're constructed from stainless steel, quality-tested for a longer service life, and will restore proper function of your fuel injection system.
( 2 )
$46.99
Jesel camshaft bearings incorporate a lead-based alloy Babbitt material that's applied to a precision centerless ground seamless steel back. This Babbitt material, in conjunction with a dry-film polymer lubricant, protects the bearing surface from damage due to instances such as cold starts, low oil flow, and catastrophic loss of oil pressure. In an effort to reduce oil windage and oil aeration from the camshaft, Jesel offers encapsulated needle-bearing camshaft bearings for a 50 to 70mm cam core. The low friction rollers are designed to operate with a minimal supply of oil. If you will be running a belt drive with this bearing, provisions need to be made to supplement the oil supply to the thrust washers of the belt drive. Order the bearing size needed for your application.
Not Yet Reviewed
$54.00
Rein Automotive turbocharger oil return lines are manufactured with premium OE quality hose material and designed to withstand the demands of automotive turbo cooling systems. They are devised to resist excessive heat, oil, and ozone factors that cause premature failure in turbo cooling systems. These direct replacements are complete with hardware and seals when necessary for installation to save installation time and additional costs.
Not Yet Reviewed
$16.99
—
$108.99
The hot new small block V8 in the GM lineup is the hyper-aggressive LS3 6.2L 376 c.i.d. 495 hp engine assembly from Chevrolet Performance. It offers a high-revving 376 c.i.d. combination that represents generations of small block V8 development and engineering. Not only is the LS3 an amazing engine in its stock configuration, but with those high-flowing rectangular port cylinder heads, the LS3 is loaded with potential. To tap into this, the engineers at GM Performance Parts offer you the LS376/480—an LS3 with an upgraded camshaft that boosts power by a whopping 50 hp! The LS376/480 comes with the same great features as the LS3 crate engine. The bottom-end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port L92 units that have been upgraded with high-revving, hollow-stem valves. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft. The GM Performance Parts engineers picked the LS Hot Cam (P/N 88958733) to take the LS3 to the next level. This cam specs out with .525 in. intake and exhaust valve lift. Duration (at .050 in.) is 219 degrees intake and 228 degrees exhaust, which allows for a dramatic increase in power. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it. A 14 in. automatic flexplate is included. Specifications: * Engine type: LS Series Gen IV small block V8 * 495 hp at 6,200 rpm, 473 lbs.-ft. torque at 5,000 rpm * Displacement: 376 cubic inch (6.2L) * Bore x Stroke (in.): 4.06 x 3.62 (103.25 x 92mm) * Block: Cast-aluminum with 6-bolt, cross-bolted main caps * Crankshaft: Nodular iron * Connecting rods: Powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Hydraulic roller * Valve lift: .525 in. intake / .525 in. exhaust * Camshaft duration (at .050 in): 219 degrees intake / 228 degrees exhaust * Cylinder heads: Aluminum L92 style port; as cast with 68cc chambers * Valve size: 2.165 int / 1.59 exhaust * Compression ratio: 10.7:1 * Rocker arms: Investment-cast, roller trunnion * Rocker arm ratio: 1.7:1 * Recommended fuel: 92 octane * Maximum recommended RPM: 6600 * Reluctor wheel: 58X * Balanced: Internal
( 2 )
$10,868.33
BTR V2 rocker arm trunnion upgrade kits are designed for LS truck-style rocker applications and feature trunnions with pre-installed inner race bearings. They're upgraded from the V1 models with a pressed inner race comprised of 52100 heat-treated bearing steel (over the more commonly used 8620 carburized steel). Additionally, these sets feature a self-oiling axle with priority feeding to the trunnion itself.
( 13 )
$159.99
—
$179.99
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
AFR 385cc Magnum BBC competition racing heads will feed your large displacement, high-rpm race engine the air it needs to deliver monster performance. The 385cc Magnum features AFR's trademark .750 in. thick head deck, A356 aluminum castings and Titanium retainers, as well as 100 percent CNC-ported intakes, exhausts, and combustion chambers to deliver the big flow characteristics to provide you with the power you need to win! Keep your monster engine both strong and powerful—allow it to feast on the plentiful airflow of the AFR 385cc Magnum BBC competition racing heads.
Not Yet Reviewed
$4,601.10
—
$5,344.50
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$117.95
—
$1,310.95
Smoother, tighter, and quicker--Melling Shark Tooth oil pumps utilize helical asymmetrical technology to improve the heartbeat of the traditional internal gear pump. The use of this new gear design feeds your engine an increased flow of oil without the usual pulsing. How much more? About 10 to 25 percent more volume! Equip your setup for a powerful bite of high performance; install one of these Melling Shark Tooth oil pumps. Melling Shark Tooth pumps are: * Smoother--significant reduction in pressure ripple (pulsing) also means a reduction in torque ripple in pump drive, improved distributor operation, a reduction in spark scatter, and improved distributor gear wear and intermediate shaft wear * Tighter--improved sealing of gear tips to housing provides reduced internal leakage and improved efficiency and performance * Quicker--increased inlet vacuum equals faster primes
( 43 )
$142.99
—
$453.99
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
—
$2,445.99
Why run an inferior cast performance oil pump when you can run Moroso billet aluminum Professional gerotor oil pumps? The pumps use the same gerotor technology that they have used in their dry sump oil pumps for over twenty years. They're designed and tested with leading engine builders and offer features such as dual feed inlets for superior oil flow, an adjustable by-pass, a Hard-Coat finish for durability. Other features include a precision machined 6061-T6 billet aluminum body with a mounting boss cross section that's 5.7 times that of a stock pump to eliminate vibration and fatigue failures. The pumps are recommended for use with all tolerance high horsepower engines using any rod combination, including aluminum. They're supplied with a mounting stud and intermediate shaft.
( 3 )
$843.99
BTR camshaft retainer plates are designed to fit behind the front cover and support greater cam loads for Gen III/Gen IV LS-based engines. They act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. A specially designed gray O-ring seal keeps your oil sealed in. When modifying your valvetrain for better performance—don't forget BTR camshaft retainer plates!
( 7 )
$19.99
Moroso one-piece push-in valve cover breathers are designed to drain oil trapped in their foam filter elements back into the valve covers, rather than allow it to drain out of the air vents or get into the air cleaner. These breathers are available in several colors and finishes. They'll fit all Moroso valve covers, as well as any other covers with a 1.22 in. hole. Some have 90 degree nipples to feed vapor into the air cleaner, and an installation grommet is included.
( 37 )
$18.99
—
$57.99
No starvation! Canton Racing road race oil pans feature their competition baffling system of trap door baffles and/or slosh baffles. These systems flow oil to the pickup compartment and then keep it from flowing or sloshing away from the pickup during turns, acceleration, and braking. Their wide, low-profile sumps deliver maximum oil capacity and ground clearance. Many pans also include provisions for an optional pan mounted dipstick and a magnetic drain plug. Feed your engine with Canton Racing road race oil pans.
( 71 )
$409.00
—
$1,389.00
Take your engine's performance to new heights with PRW Elite Series stainless steel full roller rocker arms, are engineered for maximum strength, speed, and precision. They are built for serious racers and performance enthusiasts who demand superior control and durability. Precision engineered with Direct Oil Feed Technology, a tight-fit nose roller axle, and E-Coated stainless steel rocker bodies, this series delivers smoother motion, increased RPM potential, and unmatched long-term reliability under extreme conditions. Features: * Rated up to 1000 lbs. open spring pressure * Direct Oil Feed Technology for enhanced lubrication and performance * 25% narrower roller reduces valve-end mass for higher RPM response * Precision-machined nose roller axle for smooth, friction-free motion * 12-Point polylocks included for secure, hassle-free installation
Not Yet Reviewed
$488.61
—
$505.48
Choose your dry sump oil tank from the pros at Canton Racing. Their selection now includes not only their universal tanks featuring 3-stage de-aeration baffling, but also a sprint-style tank with 4-stage de-areation baffling. All are fabricated from .100 in. thick aluminum, pressure tested, and TIG welded to deliver lightweight yet strong tanks with less possibility of leaks and cracks. Canton Racing focuses on accuracy and reliability to create better quality dry sump oil tanks. Other features of Canton Racing dry sump tanks: * 10 qt. capacities * Spiral runner for oil return * Large fill cap * Integral brackets allow for easy and secure mounting * 1 1/16-12 female bungs for feed and return lines * 1/2-20 drain port with magnetic drain plug * 1/2 in. NPT vent port
( 2 )
$383.00
Baxter Performance oil filter anti-drain adapters contain a full flow check valve that retains oil in the oil filter and the oil feed from the pump, resulting in faster oil delivery to the engine. The adapters are easy to install and come with everything you need, including an air valve for oil filter evacuation prior to oil filter removal, making your filter change quick and clean. Baxter Performance oil filter anti-drain adapters accept the factory recommended spin-on oil filters.
( 2 )
$257.36
Engine Works camshaft retainer plates are designed to fit behind the front cover and act as a seal for the front oil passages that feed oil to the lifters, cam, and main bearings. These steel plates support greater cam loads and feature a specially designed silicone O-ring seal to ensure proper sealing.
Not Yet Reviewed
$21.86
Large engines produce an enormous amount of heat, so Lingenfelter oil cooler adapter kits facilitate the installation of engine oil coolers on V8 models, primarily. They're machined from a single piece of 6061 aluminum, and are then anodized with a black hard coat for additional durability. Certain models include inlet and outlet fittings, along with ports for the oil temperature sensor and oil feed line. Lingenfelter kits are specifically designed to reduce oil pressure drop, compared with other designs on the market, and they retain the factory oil filter location. The gasket and bolts are included in your adapter kit.
( 6 )
$94.95
Ford Performance Parts cam bearings are available as common outer and inner diameter replacement cam bearings for use with standard camshafts or custom ground O.D. camshafts. They are also offered as low-friction, roller camshaft bearings that only require oil "splash" lubrication. Roller camshaft bearings allow oil feed holes to be totally blocked off, to reduce oil aeration and windage losses. Engine blocks must be machined to accept roller camshaft bearings and require an SAE 8620 steel camshaft.
( 1 )
$114.99
—
$251.99
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,550.15
—
$5,565.20
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
