Engines & Components
Availability
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your...
Welcome to your headquarters for horsepower—the place to get everything you need to build real power and performance! We’ve got competition-proven crate engines, performance-matched top end kits, and complete rotating assemblies from the biggest names in the industry. You can add a set of high-flow cylinder heads to your powerplant, upgrade your valvetrain, improve your oiling system, or drop in a new set of pistons. We also have a complete selection of crankshafts, connecting rods, harmonic balancers, pulleys, and engine brackets. We even have everything you need to restore the horsepower that time has stolen from your daily driver.
Improve the appearance under your hood with these valve cover breathers from Caspers Electronics--they are a nice finishing touch for your valve covers. Breathers are made of billet aluminum, and even come complete with a breather filter.
( 8 )
$46.79
On Sale
American-made AEM Electronics Tru-Time adjustable cam gears allow you to get maximum performance out of your engine by advancing or retarding cam timing in precise, one-degree increments. That's especially useful for heavily modified engines. AEM Electronics Tru-Time adjustable cam gears are CNC-machined from 6061 T-6 billet aluminum and have precision-cut, hard-anodized gear teeth. There are also laser-etched markings on the leading edge of the gears in one-degree increments for easy adjustment. Grade 8 bolts, installation instructions, recommended cam-gear settings, and decals are included.
( 5 )
$218.95
$122.35
—
$197.05
Better than a manual valve, these Moroso electronic control accumulator solenoid valves allow only the needed volume of oil to be released for quicker filling and discharging. They feature an internal sensor that electronically activates when engine oil pressure drops below normal. When the engine returns to normal pressure, the accumulator refills automatically, ready for the next possible occurrence. They come available in three different pressure ranges, so you can choose the Moroso electronic control accumulator solenoid valves that best fit your specific engine combination.
( 1 )
$356.99
Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines start with brand new iron Mopar 392 blocks. The engines are then assembled with high-quality components, including Edelbrock E-Force supercharger systems featuring Eaton TVS R2650 rotors—which provide unparalleled efficiency, whisper quiet operation, and OEM reliability. A 4.090 in. bore and 4.050 in. stroke help these HEMI engines produce incredible low-end torque, while the 9.9:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas. Edelbrock Gen III 426 HEMI E-Force Supercharged long block crate engines are available with or without electronics (ECU with tune and wiring harness). Engine Specifications: * Displacement: 426 c.i.d. * Horsepower: 808 hp * Torque: 762 lbs.-ft. * Compression: 9.9:1 * Block: New iron Mopar 392 * Crankshaft: Forged 4340 * Pistons: Forged aluminum—5cc * Rods: Forged H-beam * Camshafts: Comp Cams 226 degrees/234 degrees, .619/.612, 116 LSA * Rocker arms: Mopar OEM * Induction: E-Force R2650 Supercharger * Cylinder heads: Edelbrock Performer RPM * Finish: Black powdercoat * Warranty: 2-year/unlimited mileage The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (versus 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$28,418.95
—
$32,726.95
Edelbrock Gen V LT 416 C.I.D. Supercharged long block crate engines are capable of producing astounding horsepower and torque. These 100 percent brand new, fully assembled performance crate engines start with GM LT1 Gen V aluminum blocks and are filled with high-quality components—including Edelbrock's E-Force supercharger systems with DP-3C intercoolers. They offer dyno-proven, reliable performance right-out-of-the-crate. In fact, they're so reliable the engines include a 2-year/unlimited mileage warranty on all applications. Engine specifications: * Displacement: 416 c.i.d. * Horsepower: 851 hp * Torque: 780 lbs.-ft. * Compression: 10.5:1 * Block: GM LT1 Gen V aluminum * Crankshaft: Forged 4340 * Pistons: Forged aluminum—20cc * Rods: Forged H-beam * Camshafts: 243 degrees/254 degrees, .660/.651, 114 LSA * Rocker arms: GM LT1 Gen V * Induction: E-Force R2650 Supercharger * Cylinder heads: Edelbrock Performer RPM * Finish: Black powdercoat * Warranty: 2-year/unlimited mileage The high twist, 4-lobe R2650 rotor design is 15 percent larger than the TVS 2300 and features several improvements to maximize efficiency and performance at upper rpms. Improvements and advantages of R2650 rotors over R2300 rotors: * 170 degree twist (versus 160) * Better sealing with optimized length-to-diameter ratio * Increased durability with larger bearings and timing gears * Pressure relief ports in bearing plate for reduced input power * 4 percent more efficient * 15 percent larger displacement * 18 percent less input power required * 25 percent more airflow at 18,000 rpm and 14 psi boost (2.0 pressure ratio)
Not Yet Reviewed
$32,440.95
BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 376 (c.i.d.) engine that produces 530 horsepower, this standard edition builder series includes a choice of black or polished pulley kits and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.7:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and nodular iron crankshaft. Altogether, this assembly produces 495 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS376/530HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * New Cast Iron 6.2L * Main caps are 6-bolt * One-piece rear main seal * Reluctor wheel – 58x * Cam sensor – 4x (in timing cover) * Knock sensor provision on side Rotating Assembly: * Nodular iron crankshaft * Stroke – 3.622 in. * Connecting rods (6.098 in.) with 150,000 psi bolts * Hypereutectic pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.612 in. * Exhaust valve lift – 0.585 in. * Intake duration at 0.050 in. of lift – 225 * Exhaust duration at 0.050 in. of lift - 238 * Lobe separation angle (LSA) – 113 degrees * Intake centerline – 110 degrees Ignition Timing * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * Holley Terminator X Max Gen IV complete EFI engine management system, and DBW (Drive-By-Wire) pedal kit * DBW throttle body * GM Muscle-car Swap oil pan * Loaded intake manifold * Fuel injectors (EV6 type) and rail * Coil packs * Spark plugs and wires * Water pump * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * Champion 3015 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91 octane. Recommended oil is BPP710.
Not Yet Reviewed
$19,749.00
—
$22,799.00
Summit Bucks
Scat forged counterweighted crankshafts are made from high-tensile 4340 chromoly steel, with fully machined exterior profiles. All four counterweights are machined to exact symmetrical position and mass. The cranks are electronically balanced to within 2 grams, ground to exacting tolerances, and micro-polished for maximum bearing life. These replacement crankshafts are designed for 1908-27 Ford Model T applications.
( 2 )
$1,188.99
—
$2,279.99
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
( 1 )
$11,701.99
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$24,500.00
BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 302 (c.i.d.) engine that produces 365 horsepower, this Bronco edition builder series includes a black pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, hypereutectic pistons, and steel crankshaft. Altogether, this assembly produces 365 lbs.-ft. of torque. When you need or want a new powertrain for your Ford Bronco, go with the authority in crate engines and their BluePrint Builder Series 302W/365HP Bronco Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Main caps are 4-bolt * Bore is 4.000 in. * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.000 in. (and OEM-style 5.090 in. connecting rods) * Hypereutectic pistons * Externally balanced BPP50 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 60cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.533 in. * Exhaust valve lift – 0.544 in. * Intake duration at 0.050 in. of lift – 215 * Exhaust duration at 0.050 in. of lift - 220 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4WD-ready 4R70W Transmission (built to 650 horsepower): * Electronic transmission controller and TPS breakout harness for integration with controller * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This 4-speed overdrive transmission with lockup is specifically prepped for a 1966-76 Dana 20 transfer case (sold separately) * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Distributor * Valve covers * Rear sump oil pan * Billet aluminum front accessory drive with black finish (includes A/C and power steering) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Not intended for use in controlled vehicles. Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,199.00
BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Ford small block-compatible 347 (c.i.d.) engine that produces 415 horsepower, this standard edition builder series includes a polished pulley kit and 4R70W automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 10.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and steel crankshaft. Altogether, this assembly produces 415 lbs.-ft. of torque. When you need or want a new powertrain for your Blue Oval ride, go with the authority in crate engines and their BluePrint Builder Series 347W/415HP Standard Edition EFI crate engine and 4R70W transmission combos. Other product features, items, and specifications include: Block: * New BluePrint high-strength cast iron * Increased deck thickness and strength webbing * Priority main oiling * Main caps are 4-bolt * Improved water jacket design * One-piece rear main seal Rotating Assembly: * Cast steel crankshaft * Stroke – 3.400 in. * Forged I-beam 5.400 in. connecting rods * Forged pistons * Externally balanced BPP28 harmonic balancer Cylinder Heads: * BluePrint HP9009 models * Chamber – 60cc * Valves are 2.020 in. intake and 1.600 in. exhaust * Exhaust runners are 190cc intake and 65cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.543 in. * Exhaust valve lift – 0.554 in. * Intake duration at 0.050 in. of lift – 218 * Exhaust duration at 0.050 in. of lift - 226 * Lobe separation angle (LSA) – 112 degrees Ignition Timing * Initial is 10-16 degrees * Will be 34 degrees total at 3,500 rpm * Total is 32-34 degrees * Firing order is 1-3-7-2-6-5-4-8 Complete 4R70W Transmission Package (built to 650 horsepower): * Electronic transmission controller and TPS harness for integration with controller and EFI * Torque converter with 2,200 – 2,600 rpm stall * Flexplate * Starter * This is a 4-speed overdrive transmission with lockup * Gear ratios are 2.84:1 (first), 1.55:1 (second), 1.00:1 (third), 0.70:1 (overdrive), and 2.32:1 (reverse) Other Components: * Dual plane aluminum intake manifold with satin finish * Complete fuel injection system * Pro Billet distributor * Mustang-style valve covers * Oil pan with 7-quart capacity * Complete front accessory drive includes A/C, power steering, alternator, water pump, belts, and pulleys * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) Note: Factory 5 applications are a special order (must call). Recommended fuel is 91 octane. Recommended oil is non-synthetic 10W30. Not designed for EGR compatibility.
Not Yet Reviewed
$20,949.00
BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy LS small block-compatible 427 (c.i.d.) engine that produces 625 horsepower, this standard edition builder series includes a polished pulley kit and 4L65/70E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 565 lbs.-ft. of torque. When you need or want a new LS powertrain for your ride, go with the authority in crate engines and their BluePrint Builder Series LS427/625HP Standard Edition EFI crate engine and 4L65/70E transmission combos. Other product features, items, and specifications include: Block: * OEM style (4.060 in. bored to 4.069 in.) * Main caps are 6-bolt * One-piece rear main seal Rotating Assembly: * New forged crankshaft * Stroke – 4.125 in. * Forged connecting rods (6.125 in.) * Forged pistons * Internally balanced * Non-weighted harmonic balancer Cylinder Heads: * BluePrint PS8015 models * Chamber – 72cc * Valves are 2.165 in. intake and 1.600 in. exhaust * Exhaust runners are 259cc intake and 102cc exhaust Camshaft: * Hydraulic roller * Intake valve lift – 0.624 in. * Exhaust valve lift – 0.624 in. * Intake duration at 0.050 in. of lift – 239 * Exhaust duration at 0.050 in. of lift - 255 * Lobe separation angle (LSA) – 114 degrees Ignition Timing * ECM supplied with calibration (initial and total timing are controlled by PCM) * Firing order is 1-8-7-2-6-5-4-3 Assembled 4-speed Transmission Package: * Complete 4L65/70E package with electronic transmission controller * Torque converter with 2,200–2,400 rpm stall * Non-weighted flexplate * Starter Other Components: * All required (to make engine run) sensors and wiring harness (LS controller package only controls engine) * Unlocked ECU for local Dyno shop tuning refinement * LT4 87mm DBW (Drive-By-Wire) throttle body * Valve covers, retro-fit oil pan (fits most 1955-95 GM front engine, RWD, V8 cars), and timing cover * LS3 car intake manifold * Fuel injectors (42 lbs.) and return-less fuel rail * Coil packs * Spark plug wires * Gas/throttle pedal * Complete front accessory drive includes A/C, power steering, alternator, belts, and pulleys * ACDelco 41-985 spark plugs (0.040 in. gap) Note: BluePrint highly recommends their BPPLS01013 air intake kit to ensure proper MAF calculations (same used on Dyno). Recommended fuel is 91-93 octane. Recommended oil is BPP710. Not designed for use with dry sump or pollution-controlled vehicles.
Not Yet Reviewed
$23,299.00
—
$26,499.00
CP Pistons Honda K-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures, along with state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$216.63
—
$947.10
On Sale
Aeromotive alternator overdrive pulleys are the great equalizers when used in conjunction with horsepower-boosting underdrive crank pulleys. Some drivers notice an unhealthy drop in charging capacity after installing underdrive pulleys. These natural CNC-machined finish overdrive pulleys resolve that issue by counteracting those slower underdrive revolutions. They're available in 32 and 50 percent overdrive versions. Alternatively, if you merely require increased charging capacity for that sweet sound system or other electronics, Aeromotive alternator overdrive pulleys save the day again! Order the V-belt or serpentine model needed for your application.
Not Yet Reviewed
$62.05
—
$79.00
CP Pistons Honda D-Series piston and ring kits are as good as they come. CP Pistons was founded to service the needs of those with the desire to build engines of the highest quality and technology. They use proprietary tooling, dedicated cutters, unique fixtures, and state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal
Not Yet Reviewed
$216.63
—
$885.15
CP Pistons Nissan piston and ring kits are as good as they come. CP Pistons was founded to service the needs of those with the desire to build engines of the highest quality and technology. With the use of proprietary tooling, unique fixtures, dedicated cutters, and their state-of-the-art equipment they produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$216.63
—
$1,437.98
CP Pistons Super Series big block Chevy dome pistons are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology., CP Pistons uses proprietary tooling, dedicated cutters, unique fixtures, and state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for any application. Additional features include: * Pin-fitting included at no cost * Wrist pins included at no cost * Radius dome and valve relief * Double pin oilers, force fed from oil ring * Balanced to +/-1 gram * Accumulator and anti-detonation grooves included * Pick lock grooves for easy lock removal * Custom skirt cam and barrel shapes * Fully CNC-machined
Not Yet Reviewed
$225.03
—
$1,600.20
CP Pistons Honda B-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures. Their state-of-the-art equipment produces superior pistons that will not compromise your expectations. The climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features: * Full radius dome designs * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$766.50
—
$947.10
CP Pistons Big Block Chevy dome pistons are as good as they come. CP Pistons was founded to service the needs of those with the desire to build engines of the highest quality and technology. With the use of proprietary tooling, dedicated cutters, and unique fixtures, their state-of-the-art equipment produces superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for many applications. Additional features include: * Radius dome and valve relief * Double pin oilers, force fed from oil ring * Pick lock grooves for easy lock removal * Custom skirt cam and barrel shapes * Balanced to plus or minus 1 gram * Wrist pins and pin fittings included at no cost * Accumulator and anti-detonation grooves included * Fully CNC-machined
Not Yet Reviewed
$225.03
—
$1,600.20
CP Pistons Subaru piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, unique fixtures, and state-of-the-art equipment to produce superior pistons that won't compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry—and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional notes and/or kit features: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$766.50
—
$885.15
CP Pistons Mitsubishi piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, unique fixtures, and their state-of-the-art equipment to produce superior pistons that will not compromise your expectations. Their climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features include: * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * Can be compatible with oversize valves, higher lift cams, and high performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$885.15
—
$1,327.73
CP Pistons Honda H-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures. Their state-of-the-art equipment produces superior pistons that will not compromise your expectations. The climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create pistons for any application. Additional features include: * Full radius dome designs * Some pistons are suitable for turbo, nitrous oxide, and supercharged engines * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$246.29
—
$885.15
BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos take the guesswork out of matching up an engine and transmission for your ride. Featuring a fuel injected Chevy big block-compatible 632 (c.i.d.) engine that produces 815 horsepower, this standard edition builder Pro Series includes a polished pulley kit and 4L80E automatic transmission. The aluminum BluePrint Engines cylinder heads help produce a nice 11.0:1 compression ratio, with assistance from the hydraulic roller camshaft, forged pistons, and forged crankshaft. Altogether, this assembly produces 775 lbs.-ft. of torque. When you need or want a new powertrain for your GM ride, go with the authority in crate engines and their BluePrint Builder Series 632/815HP Standard Edition EFI crate engine and 4L80E transmission combos. Other product features, items, and specifications include: Block: * New BluePrint cast iron * Bore is 4.600 in. * Main caps are 4-bolt * One-piece rear main seal * Mechanical fuel pump provision * Tall deck (approximately 0.400 in. taller and wider than OEM block) Rotating Assembly: * New BluePrint forged crankshaft * Stroke – 4.750 in. * Forged H-beam 6.635 in. connecting rods * Forged pistons * Internal balance * Non-weighted harmonic balancer Aluminum Cylinder Heads: * BluePrint PS8012 performance models (0.300 in. raised exhaust port vs. OEM) * Chamber – 119cc * Valves are 2.300 in. intake and 1.880 in. exhaust * Exhaust runners are 358cc intake and 125cc exhaust * Builder must verify clearance of exhaust, shift linkage, steering components, etc. before ordering Camshaft: * Hydraulic roller * Intake valve lift – 0.698 in. * Exhaust valve lift – 0.698 in. * Intake duration at 0.050 in. of lift – 272 * Exhaust duration at 0.050 in. of lift - 282 * Lobe separation angle (LSA) – 110 degrees Ignition Timing * Initial is 10-16 degrees (16-20 degrees for Dominator-style carburetors) * Total is 32-34 degrees (by 2,500 rpm for Dominator-style carburetors) * Firing order is 1-8-4-3-6-5-7-2 Automatic Transmission Package: * Complete 4L80E package with electronic controller (lockup capability) * Torque converter with 3,800–4,200 rpm stall * Non-weighted flexplate * Starter * Gear ratios are 2.482:1 (first), 1.482:1 (second), 1.000:1 (third), 0.750:1 (fourth), 2.077:1 (reverse) Other Components: * Single plane aluminum intake manifold with satin finish * Complete EFI system with Aeromotive A1000 fuel pump * Valve covers, oil pan, and timing cover * Pro Billet distributor * Front accessory drive with polished finish (includes alternator, A/C, power steering, water pump, pulleys, and belts) * BPP7938 NGK BKR5E spark plugs (0.750 in. reach, 14mm thread pitch, 5/8 in. hex, 0.035 in. gap) * Thermostat and housing Note: Recommended fuel is 91 octane. Recommended oil is BPP710. Not designed for EGR-compatibility.
Not Yet Reviewed
$30,099.00
Chevrolet Performance ZZ6 EFI Turnkey crate engines build on more than 65 years of small block heritage and the legacy of the pioneering "ZZ" crate engine family to offer thoroughly modern performance balanced with traditional style. The engineers adapted a unique, electronically controlled port fuel injection system to the ZZ6 350, using an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed. The result is a great, traditional appearance and all the drivability advantage of EFI on the highway. A simple plug-and-play control system rounds out the package to get the engine running in your project without the need for third-party tuning. These Turnkey crate engine kits include the distributor and damper installed. The throttle body, air conditioning pump, alternator, single-belt front-end accessory drive kit, and more are also included. Installation notes: * Crate engine kit includes pre-programmed, self-learning control system * Comes with 12.750 in. externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission. * Not intended for marine applications. SPECIFICATIONS: Engine Type: Chevy Small Block V8 420 hp at 5800 rpm 408 lb.-ft. at 4500 rpm Displacement (cu. in.): 350 Bore x Stroke (in.): 4.000 x 3.480 Block: Cast iron with 4-bolt main caps Crankshaft: Forged steel, shot peened Connecting Rods: Forged powdered metal Pistons: Hypereutectic aluminum Camshaft Type: Steel hydraulic roller Valve Lift (in.): .474 intake / .510 exhaust Camshaft Duration (at .050 in.): 208 degree intake / 221 degree exhaust Cylinder Heads: Fast Burn aluminum; 62cc chambers Valve Size (in.): 2.000 intake / 1.550 exhaust Compression ratio: 9.72:1 nominal Rocker Arms: Aluminum; roller-style Rocker Arm Ratio: 1.5:1 Recommended Fuel: Premium pump Ignition Timing: 36 degree total at 4,000 rpm Maximum Recommended RPM: 5,800 Balanced: External Flexplate: 12.750 in.
Not Yet Reviewed
$13,672.14
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
