Engines & Engine Parts at Summit Racing

ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines

Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.

3.94 out of 5 stars ( 32 )

$3,998.99

BluePrint Engines GM 400 C.I.D. 500 HP Drop-in-Ready EFI Long Block Crate Engines

BluePrint Engines GM 400 C.I.D. 500 hp Drop-in-Ready EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines will replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 500 hp/473 lb.-ft. * Cast iron block * 4-bolt main * 4.125 in. bore * Forged crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum cylinder heads--64cc chamber * 2.08 in. intake/1.60 in. exhaust valves * 220cc intake/67cc exhaust runners * Roller cam * .555 intake/.576 exhaust * 236 intake/242 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, intake manifold dual plane, valve covers, oil pan, timing cover, water pump, spark plugs and wires, distributor, harmonic balancer * 30 month/50,000 mile warranty

5.0 out of 5 stars ( 1 )

$9,799.00

—

$11,799.00

Scott Drake Power Steering Drop Brackets

Scott Drake power steering drop brackets are a must to properly install your Tri-Y headers. These improved brackets change the mounting hole locations to accommodate all years and applications, with an enlarged hole for power steering ram bushings, and continuous welding affixing both supports. They are finished with a natural gray powdercoating. Get the right clearance for your Tri-Y headers with Scott Drake power steering drop brackets.

5.0 out of 5 stars ( 4 )

$32.87

ATK High Performance Ford Truck 302 Drop-In Long Block Crate Engines

ATK High Performance Ford Truck 302 drop-in long block crate engines are fully dressed with moderate horsepower and torque based off the 64-86 Ford 302 engine. These Stage 3 engines typically make about 230 hp on the dynamometer. Engine specifications: * Block: seasoned OE non-roller block * Bore/Stroke: up to 4.060 in. x 3.000 in. * Displacement: 302 c.i.d. * Crankshaft: OE one-piece seal, external balance 50 oz. * OE powder metal connecting rods * Pistons: cast aluminum * Piston rings: chromoly * Compression Ratio: 8.6:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: 192/183 at 50, .380/.395 111LSA * Double roller timing chain * Cylinder heads: OE cast iron * Stamped steel 1.6 pedestal mount rocker arms * Oil pan: rear sump truck

Not Yet Reviewed

$3,998.99

BluePrint Engines Pro Series Chevy LS 427 C.I.D. 625 HP EFI Drop-In Base Long Block Crate Engines

Swap out your powerplant with one of these BluePrint Engines Pro Series Chevy LS 427 c.i.d. EFI drop-in base long block crate engines. They put down an impressive 625 hp and 565 lbs.-ft. of torque! Featuring a 30-month/50,000-mile warranty, they're the perfect choice for drivable and reliable high-end performance. Additionally, BluePrint Pro Series Chevy 427 c.i.d. dressed long block crate engine assemblies are manufactured under strict tolerances and provide outstanding, consistent results. They include a 58X Gen IV reluctor wheel and sensors. Long block crate engine features include: * New GM LS engine block * 4340 forged 4.125 in. stroke crankshaft * 4340 forged 6.125 in. long connecting rods * Forged pistons * 11.0:1 compression * Hydraulic roller camshaft, .624 in. lift intake, .624 in. lift exhaust, 239 intake/255 exhaust duration @ .050 in. lift, with 114 degree lobe separation * Aluminum GM LS cylinder heads * Single roller timing chain * GM LS intake manifold * Full roller rocker arms * ECM Controlled (not included - customer must reprogram)

Not Yet Reviewed

$12,949.00

Hot Cams Drop-In Performance Camshafts

Hot Cams drop-in performance camshafts are one of the most economical, reliable, easy-to-install camshafts and add power gains to dirt bikes, ATVs, and UTVs. Hot Cams drop-in performance camshafts feature 8620 billet case-hardened steel and are CNC-machined for an exact fit and lobe profile. They are engineered to be drop-in cams that use stock valve springs in most cases and have multiple stages to choose from for many of the most popular applications. Stage 1 is designed for excellent bottom end, Stage 2 is designed for increased bottom to midrange performance, and Stage 3 is designed for top end performance.

5.0 out of 5 stars ( 2 )

$127.99

—

$489.99

Skunk2 Racing Tuner Drop-In Camshafts

Skunk2's Tuner drop-in camshafts are designed as a performance upgrade to stock or near stock vehicles running 3-lobe VTEC K20A/ K20A2/ K20Z1/ K20Z3 and K24A2 engines or cylinder heads. These DIC's are compatible with stock valve springs and retainers; however, a valve spring upgrade can always be considered beneficial. Each cam is manufactured of forged tool steel core for increased torsional strength, improved durability characteristics, and reduced frictional effects. All of Skunk2 Racing cams are ground to exact specifications using state-of-the-art CNC cam grinding machines equipped with cubic-boron grinding wheels and feature hardened, wear-resistant lobes and surfaces. The Tuner DIC's incorporate the same cutting-edge FAST RAMP and AMAX features as Skunk2's professional BMF and Ultra lines, which are responsible for increasing overall performance and producing unmatched response from idle to redline. You can expect optimized mid-range and top-end horsepower/torque with peak power moved up the rpm band, producing a seamless VTEC crossover! Skunk2 designs and tests all of its camshafts in-house to ensure the highest quality and performance.

Not Yet Reviewed

$657.10

Summit Racing™ Performance LS7 Hydraulic Lifters

Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!

4.18 out of 5 stars ( 22 )

$287.99

BluePrint Engines Chrysler 408 C.I.D. 465 HP Long Block Crate Engines

BluePrint Engines Chrysler 408 c.i.d. 465 hp crate engines sound and run better. BluePrint Engines use an advanced computerized balancer to get their rotating assemblies within 2 grams, ensuring silky smooth power over the entire rpm range. They also include a comprehensive, dyno-generated printout showing the critical specs. No more guessing what your installed engine's real-world peak horsepower and torque ratings are. Any doubters in the crowd? Simply flash them your Blueprint Engines' 408 c.i.d. stroker crate engine dyno results! Features, items, and specs: * Available in 3 levels of dress: Long block base, fully dressed, and drop-in-ready * Long block base model includes oil pan, timing cover, and valve covers * Fully dressed model includes long block components, plus carburetor, intake manifold, distributor, and harmonic balancer installed * Drop-in-ready model includes fully dressed components, plus water pump, air cleaner, spark plugs, and spark plug wires * Aluminum cylinder heads: 58cc chamber; 2.02 in. intake/1.60 in. exhaust valves; 176cc intake/75cc exhaust runners * Roller cam: .544 intake; .541 exhaust; 236 intake/242 exhaust duration at .050--110 degree lobe separation * Cast steel crankshaft: 4.000 in stroke; OEM-type 6.123 in. connecting rods with 150,000 psi bolts; forged pistons; external balance * Hand-picked, seasoned block: Square and parallel decked with precision-machined and sonic-tested cylinders, 2-bolt main, 4.000 in bored and .040 in. over, 2-piece rear main seal, and mechanical pump provision * 34 degrees total at 4,000 rpm ignition timing * Brass freeze plugs * Recommended fuel: 91 octane

5.0 out of 5 stars ( 1 )

$8,899.00

—

$9,999.00

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.28 out of 5 stars ( 29 )

$6,199.00

—

$8,199.00

Summit Racing™ Valve Springs

Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.

4.82 out of 5 stars ( 34 )

$17.99

—

$369.99

BluePrint Engines Low Profile GM 383 C.I.D. 436 HP Dressed EFI Long Block Crate Engines

BluePrint Engines low profile GM 383 c.i.d. 436 hp dressed EFI long block crate engines are fully Dyno tested, passed vigorous inspections, and are prepared to power up your project. These GM compatible engines are designed with a small diameter harmonic balancer, small cap distributor, and drop base air cleaner for vehicles with low firewall or hood clearance. They are a great choice to replace your tired old factory engine with fuel-injected performance. They are offered with or without front accessory drive kit. Features, specs, and contents: * Horsepower and torque: 436 hp/443 lb.-ft. * Cast iron block * 4-bolt main * 4.00 in. bore * Cast steel crankshaft * 3.750 in. stroke * OEM-type 5.700 in. connecting rods with 150,000 psi bolts * Hypereutectic pistons * Aluminum cylinder heads--64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners * Hydraulic roller cam * .544 intake/.555 exhaust * 230 intake/236 exhaust duration at .050 * 110 degree lobe separation * Holley Sniper EFI, Premium vintage valve covers and air cleaner, aluminum intake manifold, oil pan, timing cover, spark plugs and under header spark plug wires, small cap ready-to-run distributor with tach drive and coil, harmonic balancer * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,399.00

Summit Racing™ Pro LS Vortec Truck Swap Camshafts

Summit Racing™ Pro LS Truck Swap cams are affordable and give you maximum punch where the torque converter hits. The cam lobes are designed for excellent valvetrain longevity. Both drop-in or high-lift versions are available. They come in stages allowing you to quickly determine which gives you the idle and efficiency you are looking for. Idle response and the midrange torque from theses camshafts is unmatched. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for an extremely good finish quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available, quality spring packs.

4.74 out of 5 stars ( 100 )

$299.99

—

$319.99

Summit Racing™ Pro LS Camshaft and Lifter kits

You won't find a better quality cam for your LS-based engine than our Summit Racing™ Pro LS series of cams. These convenient combo kits enable you to get the cam along with the correct matching lifters. Pro LS cam, lifters, and trays are included in one easy-to-order part number. Whether for street/strip, turbocharged, or racing use, you'll find the kit recommended for your year/make and engine application.

5.0 out of 5 stars ( 4 )

$528.42

—

$577.17

Proform GM Licensed Chevy Engine Dress Up Kits

If you have been looking for great looks in an easy-to-install package, look no further than Proform GM licensed Chevy engine dress up kits. The valve covers are constructed of heavy-gauge steel to reduce leakage around the flanges and have the Bowtie Emblem embossed into them. They come in your choice of three finishes: triple chrome plated for a durable, long-lasting shine; black crinkle for little cleaning; or high-tech metallic gray.

4.78 out of 5 stars ( 114 )

$317.95

—

$339.95

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines with Fuel Injection

Complete your perfect build with a BluePrint 350 c.i.d. Cruiser fully dressed crate engine with fuel injection. The engine makes up to 18 in. of vacuum and works with power brakes, stock torque converter, stock gearing--and runs great on 87 octane fuel, which makes it excellent for daily drivers and cruising! Three models are available; compare options and select the engine that best fits your needs. Details and specs: * 341 hp / 371 lbs.-ft. * Compression ratio: 9.0:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front / external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake / 1.60 in. exhaust valves * 195cc intake / 75cc exhaust runners Cam specs: * .477 intake / .471 exhaust * 202 intake / 212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Aluminum intake * HEI distributor * EFI system * Dyno test results shipped with engine

5.0 out of 5 stars ( 4 )

$7,299.00

—

$9,299.00

COMP Cams Short Travel Hydraulic Roller Lifters

COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.

2.89 out of 5 stars ( 9 )

$781.95

Mahle Performance Piston Rings

Mahle Performance piston rings evolved from their pioneering use of piston ring simulation and computer development tools to develop rings that provide "free" horsepower by successfully minimizing friction. A large selection of coordinated piston ring sets is available in a variety of sizes, designs, materials, and coatings designed to exceed your high performance requirements. The difference is evident on the dyno and on the track. Features and benefits of Mahle Performance piston rings: * 1mm and 2mm steel top rings with patented HV385 supersonic thermal-spray process applied for superior bonding, increased durability, and increased scuff resistance * 1.5mm and 1/16 in. positive-twist, ductile iron, barrel-faced, plasma-moly inlaid top rings * Sport compact ring sets ranging from 81-100mm with steel-nitrided top rings * Traditional, reverse-twist, taper-faced (RBT) cast iron second rings * Tapered Hook Groove (THG) second rings that offer superior oil control when compared to traditional RBT rings * 3-piece style oil control rings in both standard and low tension * Standard-tension expanders are sold separately for select low-tension rings where increased oil control is necessary * CP-20 design oil rings that are easier to install; chemically polished for better oil drain-back with a 20 degree ear angle to ensure side seal around the ring

4.61 out of 5 stars ( 56 )

$99.02

—

$480.68

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$9,399.00

Cam Motion Lifters

Cam Motion lifters are available to fit your desired level of performance and budget. From economical stock replacements to their High Performance, Racing, and Premium lines of lifters, Cam Motion covers many applications. Their Premium hydraulic roller lifters feature cold-forged steel construction, precision-ground needle roller bearings and extra-long pistons, precision oil metering, and high-flow, quick-reacting check valves. Cam Motion lifters are available in factory tray/retainer-styles and tie bar-styles.

5.0 out of 5 stars ( 8 )

$159.95

Summit Racing Equipment® Pro LT Hydraulic Roller Cams

Summit Racing Equipment® Pro LT hydraulic roller cams offer a more affordable option for enthusiasts who are looking to upgrade their small block Chevy engine. These cams are designed with optimal valve events and greater lift to maximize horsepower and torque—which translates to better acceleration and overall engine responsiveness. Each roller cam is precision-machined from American bearing steel billets using a modern CNC grinder with CBN diamond wheels to ensure unmatched quality and durability and utilizes the latest advancements in lobe design technology to deliver the best possible performance for your engine. Different levels or stages of these roller cams are available; each model with various performance options to cater to your specific needs and desired idle characteristics. Order the Pro LT roller cam designed for your application.

Not Yet Reviewed

$329.99

Summit Racing™ Chevy LS 5.3L 450HP Long Block Crate Engines

Looking for big LS engine power at an affordable price? Summit Racing™ remanufactured 5.3L LS long block crate engines are rated at 450 HP and 420 lbs.-ft. torque! This engine will give you the performance and drivability you have been searching for at a price you can afford. It can be a performance upgrade for 99-07 Chevy trucks, or an engine swap into your project vehicle. You will save time and money by leaving the machine-work and assembly to us. Just bolt on your accessories and drop it in. These engines are machined and assembled for us by the guys at ATK, and backed with a 2-year unlimited mile warranty for peace of mind. Technical specifications: * Horsepower: 450+ * Torque: 420+ * Block: Seasoned OE LM7/5.3L iron * Bore/stroke: 3.800-3.820 in. x 3.622 in. * Year range: 1999-2007 * Displacement: 323 C.I.D. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting Rods: OE GM forged powder metal 6.093 in. * Pistons: Hypereutectic flat top * Piston rings: Moly * Compression ratio: 10:1 compression * Camshaft: Summit Racing Pro LS Hyd Roller #8713 * Camshaft specifications: Lift- 545/545, Duration @.050- 222/232 * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: #799 or #243 OE aluminum 64cc 2.00 in./1.55 in. valves * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed

4.33 out of 5 stars ( 48 )

$3,849.99

BTR Valve Spring Retainers

Brian Tooley Racing makes quality performance parts for your late model muscle car. When upgrading to a performance cam, be sure to replace the valve springs and retainers to finish the job right. Brian Tooley Racing valve spring retainers provide the necessary strength and durability you need. They also offer reduced weight with lightweight steel or the ultimate weight reduction with Titanium. When used with the proper Brian Tooley Racing Valve springs, this translates to increased RPM potential.

4.5 out of 5 stars ( 2 )

$5.99

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99