Engines & Engine Parts at Summit Racing

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

Ford Performance Parts 302 C.I.D. 340 HP Boss Long Block Crate Engines

Ford Performance Parts 302 c.i.d. 340 hp Boss long block crate engines feature Ford's X2 cylinder heads packaged with the legendary "E" camshaft for use with automatic or manual transmissions. Utilizing forged internals, the X2302E long blocks deliver excellent value and are solid foundations for any performance combination, including forced induction. These crate engines feature race-quality components at competitive pricing. Features and specs for these Ford Boss long block crate engines include: * 302 cu. in. * 340 hp * 9.0:1 compression ratio (nominal) * Forged pistons * Forged steel connecting rods * BOSS 4-bolt main block * Hydraulic roller camshaft, .498 in. lift intake and exhaust, duration at .050 in. is 220 degrees intake and exhaust * Double roller timing chain set * Forged steel crankshaft * Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks (rear sump pan fits most Fox body cars) * Ford Performance aluminum X2 cylinder heads * Roller rocker arms * Rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump, and non-EFI valve covers * Fuel pump eccentric installed * Built with all new parts

2.0 out of 5 stars ( 1 )

$10,230.00

Ford Performance Parts 289/302/351W X2 Street Cruiser Aluminum Assembled Cylinder Heads

Ford Performance Parts 289/302/351W X2 Street Cruiser aluminum assembled cylinder heads provide an easy way to bolt-on significant horsepower to your Street Cruiser package! Manufactured using all-new Ford tooling, and constructed using 356-T6 aluminum, each cylinder head is cast, precision machined, and assembled with premium components. The X2 heads also feature high-temperature exhaust valve seats, bronze guides, common rocker bosses for strength, and increased section thickness in critical areas for porting. Sold individually, two of these X2 Street Cruiser cylinder heads are required for you to complete your engine's horsepower upgrade. Additional features include: * Intake flows approximately 230 cfm at .600 in. lift (at 28 in. of H20) * Exhaust flows approximately 160 cfm at .600 in. lift (at 28 in. of H20) * Machined for 1.94 in. intake and 1.54 in. exhaust valve diameters * Use either GT-40 or aftermarket performance intake manifolds * Must check your intake manifold for port match; not all intakes are compatible due to the tall high-flow ports * Machined for AGSP-32C gasket seat spark plugs * Each head weighs approximately 25 lbs. less than each production cast iron head * Each head is leak-tested prior to assembly * Compatible with many aftermarket intake manifolds, headers, and valve train components * Includes Ford Performance intake valves, exhaust valves, and PAC 1219X Ovate Beehive valve springs * Features 10 degree locks, steel valve spring retainers, and stock valve seals * Features wider valve cover gasket sealing rail to prevent leaks * Compatible with all Ford Performance roller camshafts and aftermarket hydraulic roller camshafts up to .600 in. lift * Compatible with bolt-down rockers 1.6-1.7 ratio; always check rocker arm clearance to valve springs with production rocker arms * Depending on lifter preload, Ford Performance rocker shim kits * Use Fel-Pro exhaust gasket (part number 1415) * Designed to be used on Ford Performance BOSS blocks; M-6010-BOSS302, M-6010-B302BB, M-6010-BOSS35195, M-6010-BOSS35192 and M-6010-BOSS351BB * Use Ford Performance M-6065-BOSS headbolt set or Ford Performance M-6014-BOSS head stud kit * Use Ford Performance head gasket M-6051-CP331 or M-6051-S331—or, for "Big Bore" application, use M-6051-R351 * Must use Ford Performance M-6065-D289 headbolt kit to install heads on 289/302 production blocks * Does not fit 1986 5.0L with flat-top pistons unless pistons are notched for valve relief

4.33 out of 5 stars ( 6 )

$1,138.99

ARP High Performance Cylinder Head Stud Kits

ARP high performance cylinder head stud kits are precision centerless-ground and thread-rolled to Mil-S-8879 specs. A black oxide finish protects them from wear and corrosion, and ARP throws in hardened parallel washers for uniform load distribution and accurate torque readings. Keep your cylinders mounted securely with a set of ARP high performance cylinder head studs; order the hardware recommended for your year/make and engine application

4.38 out of 5 stars ( 37 )

$216.99

ARP High Performance Series Cylinder Head Bolt Kits

ARP High Performance Series head bolt kits are tough. They are rated at 180,000 psi--15 percent stronger than Grade 8 fasteners. They come available with a reduced wrenching hex head or 12-point head that help eliminate the need for valvetrain removal when re-torqueing cylinder heads.

4.8 out of 5 stars ( 1051 )

$48.99

Edelbrock Victor Series Race Cylinder Heads

Victor and Victor Jr. Series aluminum heads are designed using the latest induction technology for outstanding performance and maximum horsepower. They're ideal for the small block Ford Windsor, and small and big block Chevys. Victor Jr. Series heads are perfect for many types of competition and ultra-high performance street machines. They include threaded inserts (heli-coil) in rocker stud and exhaust manifold bolt holes. They have hardened seats and bronze valve guides for strength and durability, and a minimum 9/16 in. deck thickness and machined valve cover rails provide a more consistent gasket seal. Victor Series heads are a step above the rest, for even greater gains in horsepower. All of these heads feature reinforced rocker stud bosses, high-flow intake/exhaust ports, and specially contoured combustion chambers.

3.33 out of 5 stars ( 3 )

$782.50

Ford Performance Parts 363 C.I.D. Boss Short Block Assemblies

Start with the right foundation for your Blue Oval build--start with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Build a powerful 8.2 in. deck engine for your vintage muscle, street rod, Fox body, or late model Mustang by starting with the same short block used in the 500 hp Z363 crate engines. These Ford Performance Parts Boss short block assemblies take the bore out to 4.125 in. for 363 stroked cubes of power. Plus, strength from within is provided by the forged crankshaft and I-beam connecting rods. Power your next project with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Additional technical specifications: * Engine type: 302 based small block Ford * Bore x stroke: 4.125 in. bore x 3.400 in. stroke * Block: Boss 4-bolt main block M-6010-BOSS302 * Piston to Deck Height: .01 in." below deck (nominal) * Crankshaft: SCAT forged steel * Connecting rods: SCAT forged steel I-beam connecting rods with floating pins and ARP bolts * Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, and other inline valve Windsor cylinder heads * Pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines; 6cc valve pockets, check piston to valve clearance * Compatible with most aftermarket performance cylinder heads * Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Hydraulic roller camshaft compatible * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Requires head gaskets M-6051-R351 * Internally balanced; requires "0" balance flywheel and damper * High performance harmonic balancer M-6316-D302 recommended * High-volume oil pump M-6600-D2 recommended * 302 bolt pattern oil pan and timing cover * Built with all new parts * Photo and specifications may vary

3.67 out of 5 stars ( 3 )

$6,005.99

Ford Performance Parts Z2 Velocity Vane Cylinder Heads

Ford Performance Parts Z2 Velocity Vane cylinder heads improve power throughout the rpm range. Developed with advanced computer-aided engineering simulation tools, Ford Z2 aluminum heads feature their unique Velocity Vane intake port design that delivers outstanding street/strip power. These high performance cylinder heads are direct bolt-ons for Ford 289/302/351W engines, and they retain OEM exhaust, intake, and accessory mounting locations. Ford Z2 Velocity Vane cylinder head specs: * Cast from prime 356 T6 aluminum * Heads retain Ford OEM intake and exhaust port location and flange * Velocity Vane in port floor directs airflow around the valve stem, leading to more horsepower and torque throughout the full power range * 20 degree inline valve angle * Premium stainless steel valves: 2.05 in. intake, 1.60 in. exhaust valves * PAC 1219X conical-style valve springs with machined retainers and 10 degree machined valve locks--most hydraulic cams can be used with these springs * Valve spring closed pressure: 145 lbs. at 1.800 in. * Valve spring open pressure: 358 lbs. at 1.175 in. * Coil bind at 1.100 in., 0.650 in. max lift * Includes laser-cut guide plates for use with 5/16 in. pushrods and 7/16 in. rocker studs * Steel alloy intake and exhaust valve seats * Manganese-bronze valve guides * 63cc combustion chamber

5.0 out of 5 stars ( 2 )

$1,106.99

Trick Flow® PowerPort® Cleveland 195 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Trick Flow PowerPort® Cleveland 195 cylinder heads feature runners based on the OEM Ford 2V design. The heads feature CNC Street Ported runners that are CNC-machined with a standard resolution surface finish—perfect for street and strip machines. The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 195 heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

4.68 out of 5 stars ( 25 )

$1,299.99

—

$1,374.99

Trick Flow® PowerPort® Cleveland 225 Cylinder Heads for Ford 351C, 351M/400 and Clevor

Designed for high performance street/strip engines! Trick Flow® PowerPort® Cleveland 225 cylinder heads feature runners based on the OE Ford 2V design. The heads feature fully CNC competition ported runners with a premium high resolution surface finish for maximum, all-out performance The exhaust runners are raised .100" from the stock location to improve the short turn radius and dramatically improve exhaust flow, and a revised oil return system improves oil drain back and includes provisions for mating with Ford 351W blocks. PowerPort Cleveland 225 cylinder heads fit Ford 351C, 351M, and 400M engines out of the box. With minor machining, the heads also fit Ford 302/351W blocks to create a "replica" Boss 302 or a 351 "Clevor" engine. The heads are available fully assembled or as bare castings. Sold individually.

5.0 out of 5 stars ( 6 )

$1,074.99

—

$1,749.99

Ford Performance Parts 363 C.I.D. 500 HP Boss Long Block Crate Engines

Ford Performance Parts has taken their popular 302 based stroker engines and built them into these Ford Performance Parts 363 c.i.d. 500 hp Boss long block crate engines. They accomplished this by maxing out 347 stroker engine blocks with a 4.125 in. bore, giving you 363 cubic inches of Ford power! Ford engineers designed these Z363 engines to work both on the street and the strip with a strong torque curve that delivers over 390 lbs.-ft. of torque from 3,500 to the 6,500 rpm redline. Additional technical specifications: * 500 hp at 6,500 rpm * 450 ft.-lbs. at 5,300 rpm * Boss 302 block with 8.200 in. deck height * 4.125 in. bore x 3.400 in. stroke * Forged steel crankshaft * Forged steel I-beam connecting rods * 10.1:1 compression ratio * Forged pistons with floating wrist pins, * Hydraulic roller camshaft and lifters * Valve lift (in.): 0.580 intake/0.602 exhaust * Duration at .050 in. of lift: 232 intake/240 exhaust * Ford Performance Parts aluminum Z2 cylinder heads * Exhaust port raised 5/8 in.; may require custom headers * 2.05 in. intake and 1.60 in. exhaust valves * Roller rocker arms with 1.65 ratio * Ford Performance Parts cast aluminum valve covers; fit most non-EFI applications * SFI-approved harmonic balancer; may require spacer for pulley alignment * 7-quart high performance oil pan with windage tray and scraper * Available with front or rear sump oil pan and pickup * Aluminum high performance water pump * Internally balanced; use neutral balance flywheel (sold separately) * Ignition timing recommended, 32 degrees BTDC at 4,000 rpm * Maximum recommended rpm: 6,500 * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed; allows use of mechanical fuel pump * Intake manifold not included * Includes intake gaskets and pilot bearing * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor sold separately * Steel distributor gear required * Shipping weight approximately 500 lbs. * Engine power rating based on long tube headers, Edelbrock intake manifold Super Victor with 750 Holley carburetor and 1 in. spacer * Built with currently available parts; photo and specifications may vary

5.0 out of 5 stars ( 1 )

$12,736.99

Ford Performance Parts Cylinder Head Bolt Kits

Ford Performance Parts cylinder head bolt kits from are just what you need for fastening the heads to your Ford engine. These high-quality bolts are available for a variety of engines to suit your needs.

5.0 out of 5 stars ( 1 )

$152.99

ICON Premium Forged Pistons

ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!

4.79 out of 5 stars ( 43 )

$629.99

—

$872.99

Clevite Camshaft Bearings

Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.

4.49 out of 5 stars ( 189 )

$33.99

Ford Performance Parts 427 C.I.D. 535 HP Long Block Crate Engines with Z2-Series Cylinder Heads

Drop a Ford legend reborn into your project and experience the power of Ford Performance Parts 427 c.i.d. 535 hp long block crate engines. Built on Ford's Boss 351 blocks, these American-made engines are designed to provide you with big performance in a small block package, along with great drivability. The iconic 427 c.i.d. displacement, but on a Windsor platform—they offer all the powerplant you want at a price that you'll love! Technical information: * 535 hp at 5,600 rpm * 545 lbs.-ft. of torque at 4,500 rpm * Engine type: 351 based small block Ford * 4.125 in. bore x 4.00 in. stroke * 9.5 in. deck height Boss 351 block * SCAT forged steel crankshaft * SCAT forged steel H-beam connecting rods with ARP bolts * Mahle forged pistons with floating wrist pins * Hydraulic roller camshaft * Camshaft lift: .594 in. intake/.618 in. exhaust * Camshaft duration at .050 in: 242 degrees intake/248 degrees exhaust * Ford Performance aluminum "Z2" cylinder heads * 2.02 in. intake/1.60 in. exhaust valves * PAC 1219X ovate beehive valve springs * 10.5:1 compression ratio (nominal) * Roller rocker arms; 1.65:1 ratio * Ford Performance SFI-approved vibration damper; may require a spacer for pulley alignment * Cast aluminum, black wrinkle finish, Ford Racing script valve covers; fit most non-EFI applications * Steel oil pan with windage tray and scraper; 9-qt. capacity * Premium unleaded fuel recommended * Ignition timing: 32 degrees at 4,000 rpm * 5,600 maximum recommended rpm * Internally balanced; use neutral balance flywheel (not included) * Edelbrock Super Victor intake manifold recommended (not included) * Intake gaskets and pilot bearing included * Standard rotation water pump included * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed, allows use of mechanical fuel pump * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor not included * MSD distributor recommended (modifications for intake clearance necessary) * Steel distributor gear required * Built with currently available parts * Photo and specifications may vary * Available in front or rear sump configurations

5.0 out of 5 stars ( 2 )

$12,159.09

Pioneer Cylinder Head Dowel Pins

Pioneer offers quality new cylinder head dowel pins at an affordable price. These dowel pins are great to have on hand when you do machine work on your block. Pioneer cylinder head dowel pins are made with first-rate materials and are available in a choice of sizes for accurate cylinder head alignment.

4.81 out of 5 stars ( 57 )

$9.99

—

$11.99

Chevrolet Performance Vortec Cylinder Heads

Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.

3.0 out of 5 stars ( 6 )

$795.65

Edelbrock E-Series Head Bolt Kits

Edelbrock offers E-Series head bolt kits to install one set of cylinder heads. Each bolt kit includes the necessary bolts and washers for your application. E-Series bolts have a yield tensile strength of 190,000 psi for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. These cylinder head bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock "E" stamped into the hex head. Order the E-Series head bolt kit designed for your application needs.

4.8 out of 5 stars ( 5 )

$73.95

Ford Performance Parts Valve Cover Hold-Down Mini-Nuts

Ford Performance valve cover hold-down mini-nuts are the perfect way to finish up your engine dress-up project. Small and unobtrusive, each mini-nut has a hex head with 1/4 in.-20 threads and 1.375 in. long studs are included. Washers are sold separately. These engine valve cover accessory parts are made from high-quality steel and are available in either chrome or black crinkle finishes to give your engine a custom look. Sold as a set of four.

4.5 out of 5 stars ( 2 )

$19.99

—

$21.99

Ford Performance Parts 5.0L Coyote Gen 4 Aluminator SC Crate Engines

Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds

Not Yet Reviewed

$15,262.99

Ford Performance Parts 2024 Gen 4 5.0L 480 HP Coyote Long Block Crate Engines

Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY

5.0 out of 5 stars ( 1 )

$11,701.99

Ford Performance Parts X2347 Street Cruiser Dressed Long Block Crate Engines

The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel

Not Yet Reviewed

$12,555.00

Ford Performance Parts Valve Cover Hold-Down Wing Nuts

Ford Performance valve cover hold-down wing nuts are the perfect way to finish up your engine dress-up project. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution. All wing nuts are supplied with a separate stud, which permits precision gasket positioning on the head prior to mounting the valve covers. Made from high-quality steel, these valve cover engine accessory parts come in either black or chrome finishes, with the Ford oval logo cut sharply into the top of each wing nut to give your engine that custom look. Sold as a set of four pieces.

3.67 out of 5 stars ( 3 )

$29.99

—

$41.99

ICON Premium Forged Piston and Ring Kits

You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.

4.6 out of 5 stars ( 20 )

$753.99