Engines & Engine Parts at Summit Racing

World Products Motown LS Water Return Kits

World Products Motown LS water return kits consist of quality components needed to plumb your Motown LS block for cool performance. They include a 6061 T-6 billet aluminum Moroso thermostat housing, and PBM Performance red/blue anodized aluminum fittings with either their Pro-Lok blue rubber or Pro-Flo stainless steel braided hose.

Not Yet Reviewed

$351.10

Spectre Performance Push-In Breathers

These chrome plated push-in breathers from Spectre Performance are available in several sizes and styles. They have an internal baffle to prevent oil splash and add a touch of class to your ride.

4.47 out of 5 stars ( 30 )

$9.99

—

$17.99

Spectre Performance Valve Cover Filtered Breathers

These valve cover filtered breathers from Spectre Performance are available in several designs to meet your needs. They feature a chrome top and a stainless steel mesh or cotton filter element, depending on the application.

4.55 out of 5 stars ( 22 )

$25.99

Moroso Racing Oil Pumps

The nation's top engine builders rely on Moroso racing oil pumps because of their superior design and ability to provide consistent oil flow. They're designed to handle the extra demand required from higher engine speeds. Special anti-cavitation slots, feeder grooves, and an enlarged bypass area are machined into the housing to bleed oil back to the inlet side of the pump. They feature proprietary cast housings fitted with precision-machined gears and a precision-ground shaft for outstanding oil delivery. Each pump is 100 percent pressure-tested to stringent quality control specifications to ensure that the pump you receive will perform flawlessly.

4.44 out of 5 stars ( 9 )

$133.99

—

$157.99

BluePrint Engines 350 C.I.D. Cruiser Fully Dressed Crate Engines

BluePrint Engines 350 c.i.d. Cruiser fully dressed crate engines make an great choice for daily drivers and cruising. These fully dressed engines make up to 18 in. of vacuum and work excellent with power brakes, stock torque converter and stock gearing and they will run on 87 octane fuel. Details and specs: * 341 hp/371 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating Assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder Heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 195cc intake/75cc exhaust runners Roller Cam specs: * .477 intake/.471 exhaust * 202 intake/212 exhaust duration @ .050 - 115-degree lobe separation Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Harmonic balancer * Spark plugs * Spark plug wires * Standard rotation long style water pump * Waterneck and thermostat * Fuel pump * Oil pan * Timing cover * Aluminum intake * HEI distributor * 600 cfm carburetor * Dyno test results shipped with engine

4.36 out of 5 stars ( 28 )

$6,199.00

—

$8,199.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines are available with fuel injection—and base or deluxe carbureted models. SPECIFICATIONS FOR ALL MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Aluminum intake HEI distributor Dyno test results shipped with engine 30 month / 50,000 warranty INCLUDED ONLY WITH FUEL INJECTION MODEL BP3505CTF: * EFI system INCLUDED ONLY WITH BASE CARBURETED MODEL BP3505CTC: * 670 cfm carburetor INCLUDED ONLY WITH DELUXE CARBURETED MODEL BP3505CTCD: * Harmonic balancer * Spark plugs * Spark plug wires * Standard Rotation Long Style Water Pump * Waterneck and Thermostat * Fuel Pump * 670 cfm carburetor

4.8 out of 5 stars ( 10 )

$5,899.00

—

$6,999.00

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block Crate Engines with Fuel Injection

BluePrint Engines GM 350 C.I.D. 390 HP Dressed Long Block crate engines with fuel injection are offered in two models—one with new block casting, pulleys, and other extras. SPECIFICATIONS FOR BOTH MODELS INCLUDE: * HP and Torque: 390 hp / 410 lbs.-ft. * Compression Ratio: 9.2:1 * Aluminum Heads * Hydraulic Roller Cam * Cast Iron Crankshaft * Hypereutectic Pistons * BLOCK: NEW BluePrint Cast Iron Block Manufactured and Machined in the USA 4-Bolt Main 4.000 in. Bore 1-Piece Rear Main Seal Mech fuel pump provision: Yes Passenger Side Dipstick Drilled and tapped for clutch linkage * ROTATING ASSEMBLY: Cast Iron Crankshaft 3.480 in. Stroke Forged 5.700 in. connecting rods Hypereutectic pistons Internal Front/ External Rear engine balance * CYLINDER HEADS: BluePrint Aluminum Cylinder Heads 64cc chamber 2.02 in. intake/1.60 in. exhaust valves 195cc intake/75cc exhaust runners * CAM SPECS: Cam Type: Roller .495 Intake .502 Exhaust 220 Intake / 224 Exhaust duration @ .050 - 114 degree lobe separation * IGNITION TIMING: 32 Degrees Total at 3,500 rpm * ALSO INCLUDES: Valve covers Oil pan Timing cover Harmonic Balancer Thermostat and Water neck Aluminum intake HEI distributor Spark plugs and wires EFI system Dyno test results shipped with engine INCLUDED ONLY ON MODEL BP3505CTFD: * Standard rotation long water pump INCLUDED ONLY ON NEW BLOCK CASTING MODEL BP3505CTFK: * Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump (does not fit Corvette)

5.0 out of 5 stars ( 1 )

$7,399.00

Ford Performance Parts 2018-19 Mustang GT Coyote Engine Covers

Ford Performance Parts 2018-19 Mustang GT Coyote engine covers are designed to finish off the look of your Coyote-powered muscle car. These decorative plastic covers mount over the fuel rails, injectors, and engine wiring. The covers include an oil filler neck to allow you to reuse the engine oil cap. They also feature foam isolators to help block out engine noise. Dress-up your engine bay with an engine cover kit from Ford Performance.

Not Yet Reviewed

$181.99

Milodon Small Chevy High/Standard Volume Oil Pumps

A good oil pump is the cheapest insurance you can buy. Milodon small block Chevy high/standard volume oil pumps were built with engineering expertise to provide the highest level of quality and reliability available. The improved housing is made of a G-10 material with 40,000 psi tensile strength. G-10 is the same rugged material that brake rotors are made of. The neck is thicker than standard pumps to improve strength and end pump neck breakage under severe conditions. They're engineered to perform well in low or high-rpm applications and are CNC-machined for precise tolerances. Every pump is 100 percent flow-tested.

4.3 out of 5 stars ( 33 )

$96.95

—

$112.95

Radium Engineering Oil Filler Caps

Radium Engineering oil filler caps are anodized billet aluminum designed to fit many General Motors vehicles. These replacement caps will work on both dual and single-tooth oil fill neck types and the 7/8 in.-14 threaded port accepts 10AN ORB adapter fittings to create a custom crankcase venting setup. A 10 AN ORB plug is included to block off the internal baffle, and it can be unscrewed and removed. Underneath is a cleanable and reusable stainless steel baffle for air/oil separation.

Not Yet Reviewed

$47.45

—

$104.45

Flaming River Precision Steel Power Steering Pump Brackets

Flaming River offers these precision steel power steering pump brackets for small and big block applications using a Stage II style pump. They feature a revolutionary black oxide steel design that's adjustable for use with both short and long neck water pumps! Manufactured on precision laser machinery in the USA, Flaming River precision steel power steering pump brackets also include billet aluminum tension adjusters and mounting hardware.

3.13 out of 5 stars ( 8 )

$142.99

—

$151.99

BluePrint Engines Chrysler 408 C.I.D. 465 HP Dressed Long Block Crate Engines

BluePrint Engines Chrysler 408 C.I.D. 465 hp dressed long block crate engines are fully Dyno tested, passed vigorous inspections, and ready to power up your project. These Mopar compatible crate engines are ready to replace your tired Charger, Dart, Roadrunner, or Barracuda powerplant. There's no replacement for displacement, and replacing a little 273, 318, or 360 with a Blueprint 408 stroker crate engine will have your back tires up in smoke in no time! They are offered with a polished or black finished serpentine 8-rib front pulley kit. Features, specs, and contents: * Horsepower and torque: 465 hp/494 lb.-ft. * Handpicked seasoned Magnum block * Cylinders honed to within .0002 straightness and roundness * 2-bolt main * 4.000 in. bored .040 in. over * Cast steel crankshaft * 4.000 in. stroke * Forged Magnum 6.123 in. connecting rods with 150,000 psi bolts * Forged pistons * Aluminum Magnum pattern cylinder heads--58cc chamber * Aluminum roller rockers * 2.02 in. intake/1.60 in. exhaust valves * 176cc intake/75cc exhaust runners * Roller cam * .580 intake/.577 exhaust * 235 intake/242 exhaust duration at .050 * 110 degree lobe separation * Valve covers, oil pan, timing cover, water pump, plugs, wires, distributor, water neck, thermostat, fuel pump and fuel line, harmonic balancer, air cleaner * Power steering pump: Type II with -6AN pressure, -10AN return, 1,400 psi * Air conditioning compressor: 7B10 Peanut-style * 30 month/50,000 mile warranty

Not Yet Reviewed

$11,999.00

Milodon Complete Engine Bolt Kits

Milodon complete engine bolt kits are available with and without headbolts—and include the fasteners that you need to build a high performance engine, in one convenient box. You get carb studs, intake bolts, valve cover studs, timing cover bolts, a Grade 8 balancer bolt, water pump bolts, and header bolts. Also included are oil pan bolts, water neck bolts, fuel pump bolts, and distributor bolts. Order the kit recommended for your engine application. Features include: * Where applicable, race-quality 170,000 psi headbolts with reduced-size 1/2 in. hex head allow for easy head bolt re-torquing without excessive valvetrain interference * Carb and valve cover studs have thread starter nose to allow for easy assembly * Intake and header bolts use a reduced size 3/8 in. head to allow for greater access when tightening * Timing cover and pan bolts have serrated washer faces to resist loosening, even with initial engine startup gasket shrinkage * Water pump bolts for Chevys include both long and short water pump bolt sets; water pump and timing cover bolts for Ford 302 engines include all 19 bolts required * Balancer bolts are Grade 8 and include a heavy-duty washer and locking washer

1.75 out of 5 stars ( 4 )

$117.95

—

$144.95

Top Street Performance Power Steering Pump Brackets

Top Street Performance power steering pump brackets are the best option when cleaning up the front of your engine. Machined from steel or 6061-T6 aluminum, they're guaranteed to provide a perfect fit and secure grip. The brackets are available in different styles and finishes—for a variety of pump models (short or long neck). Order the kit recommended for your year/make and engine application.

Not Yet Reviewed

$51.84

—

$88.88

Improved Racing 1996-2004 Mustang GT Oil Filter Reloaction Kits

Improved Racing 1996-2004 Mustang GT bolt-on oil filter relocation kits move your oil filter to a more accessible location behind the front bumper. The Mustang GT kits from Improved Racing include professionally assembled, pressure-tested lines with aluminized Kevlar® sleeves for protection from heat and abrasion. Features of these bolt-on oil filter relocation kits include: * Bolt-on oil cooler adapter replaces the factory oil filter and water inlet manifold * Custom silicone radiator hose connects the factory radiator and coolant expansion tank directly to the 1.75 in. water neck on the adapter * Oil filter mount for relocating the oil filter to the front bumper support * Professionally-assembled, lightweight, heat-shielded -10AN oil lines with anodized aluminum dual-swivel fittings * Oil takeoff plate features two 1/4 in. NPT sensor ports to accommodate the factory pressure switch and aftermarket oil sensors or turbo oil supply

Not Yet Reviewed

$449.00

Summit Racing™ SBC Crate Engine Startup Kits

Summit Racing™ SBC crate engine startup kits have assembled all of the gaskets, fluids, and extra parts typically needed to set up a new engine.The small block Chevy kits will save you time and money. These kits include: * Oil filter * Oil dipstick * Intake gasket set * Water pump gasket set * Water neck gasket * RTV silicone * Exhaust manifold gasket set * Oil filter adapter * Break-in motor oil (five quarts) * Dex-Cool coolant (two gallons)

Not Yet Reviewed

$263.02

Holley LS Valley Covers

Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.

5.0 out of 5 stars ( 2 )

$279.95

—

$306.95

Mr. Gasket Chrome Engine Bolt Kits

Mr. Gasket's chrome engine bolt kits contain all of the bolts that you need for your engine. These bolts feature a beautiful chrome finish for a show-ready look.

Not Yet Reviewed

$215.95

Top Street Performance Gilmer Style Pulley Kits

Gilmer-style pulleys from Top Street Performance are a great solution for any racing set-up. They require less tension and eliminate the problem of slippage and disengagement you'd experience at high RPM with a V-belt. Each kit comes with pulleys for the crankshaft, water pump, and alternator—along with a 1.5 in. wide belt. Regardless of application, Top Street's Gilmer-style pulley kits are an efficient and lightweight option for your high performance engine. Additional notes: * Models available for Chevy big block or small block engines * Pulley material: billet aluminum * Available in black or satin

4.0 out of 5 stars ( 4 )

$186.88

—

$192.60

Melling Oil Pumps

Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.

4.56 out of 5 stars ( 322 )

$129.99

—

$186.99

URO Parts PCV and Crankcase Breather Hoses

URO Parts PCV and crankcase breather hoses are only a part of their vast range of OE replacement fuel, intake, and breather hoses for many European makes. URO manufacturing facilities are ISO 9000 certified. Plus, URO engineers extensively test flow rates, chemical resistance, material composition, etc. to verify that all URO Parts PCV and crankcase breather hoses match the performance of factory parts—without the exorbitant OEM prices.

Not Yet Reviewed

$22.99

ARP Engine Bolt Kits

ARP engine bolt kits come in your choice of polished stainless steel or black oxide chromoly steel bolts with 12-point or hex heads. These kits include the bolts and washers for your engine.

4.16 out of 5 stars ( 225 )

$99.99

—

$255.99

Summit Racing™ Engine Bolt Kits

Summit Racing™ engine bolt kits are available in your choice of chrome, stainless, zinc, polished stainless, or polished stainless with Allen heads and includes bolts and washers for most external engine accessories.

4.15 out of 5 stars ( 66 )

$18.99

—

$155.99

Harland Sharp Original Roller Rockers

If you plan on adding performance to your street machine or building a serious racer, Harland Sharp Original Series roller rockers are recommended for you. Using the very latest manufacturing technology and only the very finest materials, the Original Series rockers incorporate race-proven enhancements, such as improved strength, performance, and lighter weight over conventional rocker arm designs. Don't settle for any old rocker arm--go with a true leader in roller rocker arm technology--Harland Sharp.

4.61 out of 5 stars ( 177 )

$379.99

—

$437.99