Availability
Showing In Stock Items. Show All 171 Items.
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$315.99
Ford Performance Parts high-strength variable cam timing (VCT) solenoids offer a stronger mounting provision for racing applications. They're more robust and provide increased strength over OEM solenoids. Improve your chances for victory with a set of Ford Performance Parts high-strength VCT solenoids, available for a variety of Mustang and F-150 applications from 2011 and up. .
( 11 )
$106.99
Ford Performance Parts offers timing chain covers for a variety of applications. These one-piece cast aluminum covers are direct replacements for your original equipment. They feature precision-machined gasket and sealing surfaces for superior leak resistance. If your factory cover is cracked or broken, order the Ford Performance model designed to fit your year, make, and model.
( 43 )
$212.99
J&L Oil Separator Co.'s new oil separators are the perfect addition to your high performance machine. They're everything you're missing to filter out oil vapors that could damage your internal engine components over time. The 3 oz. tanks nearly triple their original design in size—and feature a thick billet construction that's available in a clear or stealthy black anodized finish. Their new multi-stage filtration system collects the finest of vapors and drops them into an easily removable bottom. Clean air is then able to pass through, saving components such as your intake tube and manifold runners. J&L Oil Separator Co. oil separators include the fittings you'll need to make installation a breeze. Order the model tailored for your vehicle.
( 371 )
$169.00
Summit Bucks
Clearance
An engine running on dirty oil won't last. Keep it clean with an ACDelco Gold oil filter. They help trap particles up to 25 microns, or one-third the width of a human hair, thereby improving the quality, performance, and lifespan of your engine. ACDelco makes oil filters to fit 99 percent of all cars, light trucks, and sport utility vehicles on the road today. Order the model designed for your engine application. Additional features include: * Excellent filter capacity, enhanced efficiency, consistent flow management, and high durability * Tight seals to prevent unfiltered oil from entering your engine * Consistent, dependable oil filtration throughout the filters
( 180 )
$10.99
$6.99
—
$7.50
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 39 )
$80.28
—
$112.40
Ford Performance Parts timing chain tensioners are replacement components for your Ford engines. These primary steel timing chain tensioners are direct-fit for certain applications, and some are designed to improve timing chain durability in high-rpm applications.
( 4 )
$141.99
Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. These H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. Clevite H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They come with 180 degree oil grooves, and can be ordered with an extra 0.001 in. of clearance if needed.
( 4 )
$102.99
—
$133.99
K&N offers oil catch cans for a variety of cars and trucks from the early 2000s and up. These air oil separators protect the engine and intake tract from blowby by capturing the oil in K&N's industry-leading high-capacity reservoir. This also helps prevent power loss. The separators are easy to install in about 30 minutes with basic tools and use factory-style hose connections to quickly snap on and off. These units replace the factory line from the crank case, allowing the oil separator to be mounted to a convenient location in your engine bay. No tools are needed to check and empty the oil collector reservoir. Order the model recommended for your vehicle. Product details: * Designed to protect the engine from oil contamination due to blowby * Helps protect against power loss and premature detonation * Engineered to reduce build-up of oil and contaminants in your intake tract * Premium OEM-style connectors and robust hoses * Large 6 oz. capacity reservoir; no tools needed to check and empty * Direct-fit to application (vehicle-specific)
( 20 )
$143.10
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$147.99
—
$212.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 135 )
$8.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 192 )
$164.99
—
$590.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 355 )
$107.99
—
$149.99
Timing chains stretch over time and become slack. Melling timing chain tensioners will retain the efficiency of your timing chain. These quality-built steel components keep your chain under the proper tension for optimum performance in your engine. So, if your old tensioner is allowing your timing chain to "slack off," replace it with a Melling!
( 3 )
$33.99
—
$64.99
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 144 )
$643.31
Whether you're dressing up or simply replacing an old oil pan on your vehicle, Ford Performance Parts has the oil pan for you. These oil pans are available in several finishes for a variety of applications, so there's sure to be one to suit your needs and your style.
( 98 )
$139.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 69 )
$89.50
—
$133.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 513 )
$15.99
Standard Motor engine variable timing sprockets will restore your vehicle's drivability. Designed to match OE performance, these SMP units are precision-machined to ensure accurate variable valve timing and correct rough idle. And, once installed, the cam phasers can help to reduce emissions and improve vehicle efficiency. Choose quality parts to get the job done right the first time; choose Standard Motor engine variable timing sprockets.
( 8 )
$74.99
—
$128.99
No longer do you have to fight with cartridge filter cap removal and filter assembly. Baxter Performance cartridge-to-spin-on adapters help you convert to easy-to-use and reliable spin-on oil filters. Machined from aluminum and anodized for added durability and lasting good looks, the adapters retain more oil for faster oil delivery and pressure at startup. Choose the adapter designed for your vehicle. Note: Using the adapters will add 1.25 in. of distance from the engine filter housing opening plus the length of your chosen spin-on filter. Please consider these dimensions and associated clearances when ordering.
( 43 )
$359.96
King SI-Series rod bearings are recommended for OE applications. They're designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE crankshafts. These direct replacements have an improved finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series rod bearings also feature improved oil clearance to reduce wear and increase engine life—which, in turn, lessens operating noise, vibration, and excess oil flow. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 94 )
$17.50
—
$34.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$115.99
—
$134.99
PRW harmonic damper bolts help hold your balancer properly locked in place as they absorb the massive energy from crankshaft flexing. Professionally designed to withstand 180,000 psi fastener yield strength, they also include a wide-area 1/4 in. thick washer to further spread the fastening load. For installation ease, these bolts feature a deep-socket, 12-point head-style so your torque wrench stays fully engaged up to spec. Show your knuckles some mercy--complete your install with PRW harmonic damper bolts. Order the bolt recommended for your specific vehicle and engine size.
( 9 )
$20.04
Single and dual remote Perma-Cool oil filter relocation kits enable you to position your oil filter where you want it for more convenient oil changes and increased engine oil capacity. The complete kits include everything needed for an easy installation: A spin-on adapter, a remote oil filter bracket, hoses, fittings, mounting hardware, and detailed instructions. They use 3/4 in.-16 threaded, Ford-type spin-on oil filters (not included), and come with an assortment of adapters to attach the oil filter bracket to almost any engine. Relocation kits are available in universal and application-specific models.
( 60 )
$70.41
—
$88.16
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
