Availability
Showing In Stock Items. Show All 206 Items.
Ford Performance Parts camshaft drive kits include all of the components that you need for proper timing. They're offered in numerous packages for a variety of applications and include high-quality production components for increased durability. Depending on vehicle, kits may include new production: * Tensioner arms * Chain guides * Primary and secondary timing chains * Primary and secondary timing chain tensioners * Camshaft sprockets, spacers, bolts, and washers * Camshaft VCT phasers and bolts * Crankshaft sprockets, spacers, and washers * Crank position trigger wheel * Dowel pins and fasteners
( 46 )
$492.99
—
$614.99
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$17.99
COMP Cams XFI NSR Camshafts for Ford 4.6L/5.4L modular 3-valve engines are the first truly "drop-in installation" camshafts ever created for this popular application – striking the perfect balance of performance versus installation difficulty. An excellent alternative to the regular COMP Cams Xtreme Energy Ford Modular camshafts, these 2-staged cam sets require no computer re-tuning; however testing has shown that mild tuning can result in power gains even greater than the normal 25 rear wheel horsepower. These camshafts are fully compatible with the factory variable cam timing (VCT) system and are designed to operate in the stock rpm range.
( 7 )
$1,028.95
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$92.99
—
$614.99
Ford Performance Parts high-volume oil pumps are high-quality, pressure-tested, and hand-turned to deliver more oil than stock pumps. They are offered for most popular Ford V8s. Additional information: * Most are high-volume with standard pressure * Also available for select applications requiring higher volume and pressure * May require bolt-on style pickup (not included) * Some are not recommended for use with stock-capacity oil pans due to their higher pumping capacity * Because of their larger size, some pumps will not fit stock rear sump oil pans * Where applicable, includes a steel backing plate to reduce internal leakage and cavitation erosion
( 45 )
$149.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$22.99
—
$223.99
Give your engine the winning edge with King XP-Series coated rod bearings. Built off the revolutionary XP-Series tri-metal construction, King's factory-applied pMaxKote nano-composite coating takes protection to the next level without adding any additional thickness! These high performance race bearing sets are available for fitment on a wide range of specific vehicle applications. pMaxKote provides: * Superior seizure resistance * Superior cavitation resistance * Superior wear resistance * Superior protection against oil starvation
( 10 )
$140.99
—
$201.99
Now you can easily move your vehicle's oil filter to a more convenient location for quicker and easier filter changes with one of these Derale Performance engine oil filter relocation kits. They work great for engine swaps, too! The kits are available for hundreds of vehicles; order the model recommended for your application.
( 38 )
$80.28
—
$112.40
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 37 )
$13.99
—
$18.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 344 )
$120.99
—
$524.99
Cloyes timing chain kits meet OE performance requirements. They utilize the latest in design and materials so you can enjoy quiet, maintenance-free performance. These assemblies are available in various styles, including link belt, single roller, and single non-roller. Order the kit designed for fitment on your specific model or engine application.
( 174 )
$84.99
—
$515.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$27.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 72 )
$16.99
—
$22.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$180.99
—
$832.99
Tune your camshaft timing with COMP Cams adjustable cam gear sets. Your 2 and 4-valve engines have the capacity to make horsepower, but the factory timing gear setup can keep you from accomplishing your goals. COMP Cams adjustable cam gear sets provide up to 12 degrees of camshaft advance or retard, install just like the original factory gears, and work with OE timing chains. The sets feature both a steel hub and a steel outer gear for heightened durability and light weight. The ability to adjust the cam timing is important when your performance engine modifications are completed. Get the most from your engine with COMP Cams adjustable cam gear sets.
( 6 )
$341.95
COMP Cams Xtreme Energy modular 2-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. From stock replacements to ultimate performance, there is an Xtreme Energy cam to meet your performance goals.
( 20 )
$838.95
Are you putting new cams in your engine? These Trick Flow® roller followers will help you get the job done right and get the most out of your cams. Featuring hardened steel construction, Trick Flow® roller followers are the perfect OE-style replacements for 4.6/5.4L 2V or 4V modular engines.
( 3 )
$14.99
—
$179.88
Ford Performance Parts 4.6/5.4L 3-valve cam covers are designed to bolt on to your late model Ford 4.6/5.4L V8 engines. They are made of cast aluminum and are available in different powdercoated finishes to match your style. They include cam cover gaskets, VCT solenoid grommet, and fasteners. Ford Performance Parts 4.6/5.4L 3-valve cam covers are 50-states street legal when installed with the appropriate closed PCV hardware.
( 27 )
$379.99
—
$380.99
On Sale
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 69 )
$3,851.99
$2,620.99
—
$3,891.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 66 )
$97.99
—
$110.99
Get oil filtration that's as good as gold with K&N Performance Gold oil filters. Keep your engine free from contaminants as small as 10 microns. They use a resin-impregnated filter media to provide maximum filtering and an inner core to lend extra structural support to the filter, preventing filter collapse. Plus, many of these K&N oil filters have an anti-drainback valve (where applicable) that eliminates dry starts and prevents oil from draining back into the crankcase during engine shutdown. And they're protected by a heavy-duty outer shell that guards against rock and stone damage and provides over 550 psi hydrostatic burst strength. So, if you want golden-level oil protection, then you want K&N oil filters.
( 505 )
$15.99
—
$17.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$8.99
—
$14.99
Your valves will open more quickly from a fully closed to a fully opened position with a roller setup, compared with conventional flat lifters. With Sealed Power Hydraulic roller lifters you will notice higher performance, quieter engine operation, and more horsepower. They also provide proper vacuum and idling capabilities.
( 26 )
$23.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
