Availability
Showing In Stock Items. Show All 228 Items.
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 389 )
$194.99
—
$237.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 190 )
$119.99
—
$191.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 351 )
$155.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$123.99
—
$152.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$24.99
King XP-Series rod bearings feature advanced metallurgical and geometric technologies that meet extreme performance loads. They were developed for all performance applications that use forged steel aftermarket crankshafts and produce high loads for extended periods. King focuses on one product—bearings—and nothing else. Their innovative race-only Xtreme Performance Max Black Tri-Metal rod bearings have a 24 percent stronger overlay and 17 percent more fatigue strength by using a micro process called SecureBond. Built with enhanced tri-metal, King XP-Series rod bearings layer copper-lead construction with a nickel plate barrier and a lead/tin/copper Babbitt overlay over a steel backing in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors—at an amazing +/- .0001 in.! XP-Series rod bearings are narrowed on the crank cheek side with increased crush height for improved bearing-to-bore contact, heat transfer, and reduced spin potential in high-rpm applications.
( 68 )
$69.99
—
$192.99
Summit Racing™ offers engine oil change kits for hundreds of foreign and domestic vehicles. The combo kits include 5 to 10 quarts (depending on selection) of a Mobil Advanced full-synthetic motor oil, the official blend of NASCAR. It protects your engine for up to 10,000 miles. Each kit also includes an oil filter. Maintain your late model car, truck, van, or Jeep with a complete lubrication solution from Summit Racing™.
( 18 )
$117.89
Built with enhanced tri-metal, King XP-Series main bearings have a layered copper lead construction, with a nickel plate barrier and lead/tin/copper Babbitt overlay over a steel backing--in an adhesion process that provides superior stability and durability. King's advanced control measures hit a bull's-eye, maintaining wall thickness tolerances far tighter than their competitors: an amazing +/- .0001 in. The XP-Series main bearings are narrowed for large radii crankshafts and feature enlarged, chamfered oil holes with full, 3/4 in., or 1/2 in. grooving for improved oiling. They deliver consistent and reliable performance with a high-load capacity. These race-only Xtreme Performance (XP-Series) Tri-Lecular main bearings are proven track-tough to handle the ground-shaking power of your race engine. Hundreds of sets are available; order the bearings recommended for your vehicle.
( 43 )
$85.99
—
$179.99
PowerBond Premium replacement harmonic balancers offer high-quality for the professional engine rebuilder or shade tree mechanic. Featuring a spheroidal graphite iron casting which is considered near-steel strength material, they use both inserted and pressure-bonded rubber that produces rubber strength that is stronger than competitive balancers. PowerBond Premium replacement harmonic balancers are available for the most popular passenger cars, light commercial trucks, and 4WD applications.
( 209 )
$117.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 314 )
$68.99
—
$92.99
ACL Performance offers Race Series rod bearing sets for a wide range of vehicles. These high performance tri-metal engine bearings are designed to withstand higher RPM conditions. They feature a high-strength overlay plate with reduced thickness for improved fatigue properties. Select the crankshaft undersize and quantity recommended for your year/make and engine application. Additional details: * Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. * Increased crush for improved bearing retention * Elimination of flash plating on the back of the bearings to improve heat transfer through the bearings and to maximize the grip between the bearings and its housing * Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films * 3/4 in. grooved main bearings to optimize bearing load carrying surface area and oil flow to the conrod bearings * Tight consistent wall tolerances to help you maintain consistent clearances * Enlarged ID chamfers on bearing edges (where required) to accommodate large fillet radius on performance crankshafts
( 8 )
$83.99
—
$141.99
PowerBond Race performance harmonic balancers bring the advantages of bonded balancers to high-revving and high-horsepower street/race applications where an SFI-approved balancer is required. They have been tested beyond 21,000 rpm without failure, and every balancer features a precision CNC-machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring. They are very light and in most cases, they are only marginally heavier than the original cast iron balancer. The steel inertia ring on the Race Series models is positively protected against forward and backward movement. PowerBond uses our Race Series high-pressure, low-cure that features a natural rubber developed in our laboratory. Every model has easy to read computer etched timing marks and meet SFI specification 18.1.
( 98 )
$291.99
—
$353.99
King HP-Series rod bearings were developed mainly for drag race applications needing a material harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short durations and still offer higher embeddability and compatibility. In response, King developed the HP-Series, featuring the Alecular metal structure. The HP-Series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip, and some levels of Circle Track racing. Order the set recommended for your vehicle. HP-Series bearings are particularly suitable for the following cases: * When a tri-metal bearing's Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft * When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement * When contaminants enter the oil stream, scratching and damaging the crankshaft journals
( 36 )
$66.99
—
$108.99
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 135 )
$14.99
—
$186.99
These Sealed Power MA Series main bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank whose surface hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better control of wall variance. It also helps to minimize debris embedding, which can score the crank's surface.
( 75 )
$92.99
—
$157.99
Melling rocker arms, available for both domestic and import applications, meet or exceed OEM specifications. Depending on the OE design specifications, Melling rocker arms are provided in either stamped or cast materials. Built from only the best materials and manufacturing processes available, they are perfect replacements priced right for your budget. Melling recommends installing new rocker arms with every engine rebuild to assure long engine life and efficient performance. Answer the little knock under your hood with replacement rocker arms from Melling--a supplier of quality engine parts.
( 73 )
$13.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$53.95
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 80 )
$32.99
—
$114.99
Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks feature a locking mechanism that prevents the expulsion of the dipstick handle under pressure. They also feature a PTFE-lined, black stainless steel braided outer housing, a flexible inner dipstick cable to measure oil levels, and a black anodized handle and fittings to match the outer cable jacket finish. Whether you're using stock exhaust manifolds or installing a set of headers, Lokar Midnight Series Anchor-Tight locking flexible engine dipsticks are guaranteed to keep your dipstick handle locked in the correct position. Order the model recommended for your vehicle year/make and engine application.
( 27 )
$163.95
Using only three parts (a laser-welded sealed housing, an internal inertia ring, and highly viscous silicone fluid between the two), SFI-approved Fluidampr harmonic dampers can control all crankshaft vibration--not just a limited frequency range. As a result, you get reduced wear on the main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.
( 142 )
$466.77
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$6.99
—
$31.99
ACL Performance Race Series main bearing sets deliver everything performance bearings should be by utilizing design, metallurgy, engineering, precision quality control, and of course, years of knowledge and experience. Main bearings feature multi-layered tri-metal copper alloy construction that blends characteristics to provide high strength and excellent seizure resistance. They are manufactured to exact tolerances ensuring a reliable fit and helping to maintain consistent clearances. Main bearings are augmented with extended grooves, as well as other bearing enhancements, like increased crush, bearing eccentricity, and enlarged I.D. chamfers. ACL Performance Race Series main bearing sets are produced in standard and extra clearance versions, with or without friction reducer coating, and with modifications to meet specific build requirements, such as narrowed bearings that permit additional edge clearance when running crankshafts with exceptionally large fillet radii. In the heat of competition proven technology always comes through. The choice for your build should always be ACL Performance Race Series engine bearings. Choose the main bearing set designed for your vehicle.
( 1 )
$152.99
—
$198.99
Put the engineering expertise of Trick Flow® to work on your engine with a Track Max® harmonic damper. These SFI-18.1 rated, carbon steel dampers have an injection-molded and bonded elastomer plus engraved timing marks for easy adjustment. The corrosion-resistant black powdercoated finish provides good looks and long-lasting durability.
( 68 )
$349.99
Federal Mogul CP-Series rod bearings feature classic tri-metal construction and are a good choice for either street or moderate competition use. They have rugged 1010 steel backings, covered by Federal Mogul's H-24 copper-lead alloy. On top of this is a nickel barrier, followed by the tri-metal (lead-tin-copper) overplate that gives these bearings their strength and fatigue resistance. The bearings are then entirely covered with a flash coating of tin. Order the set designed for use with your make/model and engine application.
( 116 )
$5.99
—
$6.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
