Availability
Showing In Stock Items. Show All 339 Items.
Give your roller lifters the proper orientation with Summit Racing™ lifter guides. Hydraulic roller lifters cannot be allowed to rotate, and our sturdy lifter guides will keep your lifters properly positioned to prevent rotation. They're available in a variety of styles for applications from the 1980s and up. Trust Summit Racing™ lifter guides to keep your lifters captive!
( 40 )
$35.99
—
$54.99
As the crankshaft flexes, the balancer absorbs incredible amounts of energy. ARP balancer bolt kits will ensure that your balancer is locked into position. They feature a 12-point head that accepts a deep socket to eliminate the fear of stripping the head.
( 618 )
$29.99
—
$32.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 285 )
$35.99
—
$45.99
Melling factory replacement hydraulic roller lifters are designed and built to get the job done while ensuring efficient performance and quiet valve train operation. They are perfect for when you're ready to freshen up your engine. Melling factory hydraulic roller lifters are manufactured from the finest materials and designed for the proper fit and long dependable lifter life.
( 20 )
$20.99
—
$24.99
Summit Racing™ offers cylinder head bolt kits that will keep consistent clamping force on your heads and not your wallet! Our kits contain strong, high-quality steel bolts with either a black oxide or zinc plated finish for added durability. Some kits also include washers. Stay on budget--let Summit Racing™ help complete your cylinder head installation with our selection of cylinder head bolt kits.
( 83 )
$44.99
Summit Racing™ LS2 timing chains provide heavy-duty timing performance! These steel single roller timing chains have the extra strength and reliability you need for beefed-up LS valvetrain setups.
( 47 )
$30.99
Brian Tooley Racing carries a wide variety of options for your LS or LT engine, including this set of lifter guides. BTR lifter guides are designed to accommodate four valve lifters each for either your LS or LT engine to give your roller lifters the proper orientation. These sturdy replacement lifter trays will register your lifters to prevent rotation, keeping them where they belong.
( 5 )
$29.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$35.99
—
$53.99
Clevite camshaft bearings are manufactured to meet or exceed OEM parts when it comes to strength and durability. They will help to give your motor extra life, and their quality construction and superior materials will help to protect your vital engine parts from the harmful effects of friction. With thousands of applications, you're sure to find the bearings you need for your motor.
( 180 )
$28.99
—
$39.99
Holley offers oil dipstick and tube kits for GM LS engines that are direct-fit assemblies for their LS retrofit oil pans. Each of these kits include the braided steel dipstick and black powdercoated steel tube built from the same high-quality materials as the OEM units. The oil dipstick and tube kits for GM LS engines provide both pieces together for one price to complement their oil pans.
( 34 )
$52.49
Improved Racing's engine block oil galley barbell plugs feature a second O-ring that completely seals off the dirty oil from the clean oil, forcing 100 percent of the flow through the filter. Sharp corners were avoided and machined as smooth fillets to improve oil flow, while the bull nose tip helps smooth oil flow to the oil filter. The shaft diameter is smaller than the OEM plastic barbell to minimize flow restriction, and the threaded hole allows for easy removal with any 4mm x 0.7 threaded screw. Please refer to the Applications tab when ordering to confirm the fitment. Features of Improved Racing's barbell plugs include: * Direct replacement for plastic OEM barbell plug * Precision CNC-machined from billet 6061-T6 aluminum * Viton® rubber O-rings offer high-temperature resistance and excellent chemical compatibility with engine oils
( 17 )
$26.90
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$52.99
King SI-Series main bearings are recommended for OE applications. These replacement bearings are designed for aftermarket gasoline or diesel engine rebuilding—and performance engines with factory crankshafts. The bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. King SI-Series main bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow. Order the bearing set designed for fitment on your make and model.
( 78 )
$26.99
—
$39.99
Sealed Power A-Series rod bearings can actually polish the journals on your crankshaft. That's because there's a small percentage of silicon mixed in with the aluminum and tin that make up the bearing-surface alloy. The silicon is there for wear resistance, but its toughness actually smoothes the journals of a crank with a surface that hasn't been optimized! This special surface alloy is laid over a high-strength 1010 steel backing and delivers improved seizure and corrosion resistance, as well as better wall variance control. It also helps to minimize debris embedding, which can score the crank's surface. Order the replacement bearings designed for your vehicle make and engine application.
( 33 )
$22.99
—
$54.99
Clevite coated H-Series rod bearings were developed primarily for NASCAR racing, but are also well suited to other types of competition engines. They're especially good for engines that run at medium-to-high revs. They have hardened-steel backings with thin overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings feature Clevite's exclusive TriArmor coating, the industry's only moly/graphite treatment. The sophisticated blend, in a low-friction PTFE polymer base, offers extraordinary protection and lubricity. They also have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. The Clevite coated H-Series rod bearings are available with various under-sizes, including 0.001 in. of clearance for polished journals.
( 10 )
$25.99
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 94 )
$21.99
—
$32.99
Mahle Original fasteners deliver the clamping force necessary to seal the combustion chambers, as well as the oil and coolant passages--even at extreme temperatures and pressures. On your next cylinder head reassembly, use bolts designed to exact specifications for the best sealing solution--Mahle Original head bolt kits.
( 33 )
$23.99
—
$41.99
Summit Racing™ LS Rear main seal housings are the correct housings for all LS models. These aluminum housings are ideal for replacing damaged housings and building a new project from scratch. Summit Racing™ LS rear main seal housings are designed for a correct fit and quality performance.
( 17 )
$50.99
Fel-Pro headbolt kits contain a complete set of the highest quality headbolts and hardened washers available. They're cold-formed to ensure molecular integrity, then heat-treated prior to thread rolling and machining. Reduced-diameter bolt heads eliminate the need for valvetrain removal and facilitate cylinder head re-torquing. The bolts are available in a variety of head styles for fitment on specific vehicle and cylinder head applications.
( 216 )
$24.99
—
$44.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable finish for good corrosion protection and long life. Get yours today.
( 180 )
$41.99
—
$44.99
ACDelco GM Genuine Parts hydraulic roller lifters are designed as direct replacements for your engine, offering the quality, reliability, and durability of GM OE. They automatically help maintain a "zero" valve lash condition to help prevent valvetrain noise and unnecessary component wear. Stay with the parts brand your vehicle came with; order the lifters tailored for your specific GM make/model.
( 4 )
$23.99
—
$41.99
These heavy-duty Summit Racing™ balancer bolts are the best way to bolt on your damper. As the crankshaft flexes and twists, the damper absorbs a lot of kinetic energy. To ensure that the damper stays on tight, these bolts include a thicker flat washer, machined perfectly flat to spread the fastening load over a greater surface area. They're manufactured from premium materials for maximum strength and feature a quality finish for good looks.
( 114 )
$29.99
These timing chain damper adapter brackets allow for the use of LS2 timing chain dampers on any GM LS engine block. The brackets use the three lower cam/thrust retainer plate bolts for attachment. The brackets can also be used with aftermarket LS2 timing chain dampers with the included hardware.
( 24 )
$41.99
Keep your camshaft from wandering with Melling camshaft thrust plates. These solid steel plates protect your engine investment by returning your timing back to the desired specifications. Proper positioning of your camshaft is crucial. Don't let your cam walk--replace worn camshaft thrust plates with new ones from Melling.
( 38 )
$30.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
