Availability
Showing In Stock Items. Show All 98 Items.
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 102 )
$2,049.95
—
$4,449.95
BluePrint Engines 350 c.i.d. Cruiser crate engines make an excellent choice for daily drivers and cruising. These crate engines make up to 18 inches of vacuum and are designed to work with power brakes, stock torque converter, stock gearing--and run great on 87 octane fuel. Get a new engine and bring your ride to life with BluePrint Engines Cruiser crate engines.! More features, products, and specifications include: * 341 hp / 371 lbs.-ft. torque * Compression ratio: 9.2:1 * Aluminum heads * Hydraulic roller cam * Cast iron crankshaft * Hypereutectic pistons Block: * New BluePrint cast iron block * 4-bolt main * 4.000 in. bore * One-piece rear main seal * Mechanical fuel pump provision * Passenger side dipstick * Drilled and tapped for clutch linkage Rotating assembly: * Cast iron crankshaft * 3.480 in. stroke * Forged 5.700 in. connecting rods * Hypereutectic pistons * Internal front/external rear engine balance Cylinder heads: * BluePrint aluminum cylinder heads (H8002K) * 64cc chamber * 2.020 in. intake / 1.600 in. exhaust valves * 195cc intake / 75cc exhaust runners Roller cam specifications: * 0.477 intake / 0.471 exhaust * 202 intake / 212 exhaust duration @ 0.050 in. 115-degree LSA (Lobe Separation Angle) Ignition timing: * 32 degrees total at 3,500 rpm Also includes: * Valve covers * Oil pan * Timing cover * Dyno tested results shipped with engine
( 9 )
$4,899.00
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 11 )
$2,389.95
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,490.20
AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.
( 40 )
$2,328.90
ATK High Performance Chevy LQ4 6.0L 460 hp long block crate engines lay down impressive power that can be run with factory fuel injection or retrofitted with a carburetor. They're hand-built, balanced, and blueprinted using top-quality parts. Don't waste time trying to salvage a high-mileage short block when you can get a fresh mill that's ready for your choice of components to make it your own. ATK Chevy LQ4 6.0L 460 hp long block crate engines include: * Handpicked and seasoned 6-bolt main block * Aligned and honed main bores * OE steel crankshaft * 3.622 in. stroke * OE connecting rods * Hypereutectic dish top pistons * Aluminum cylinder heads * Hydraulic roller camshaft * Timing chain and gear set * 1.7:1 ratio rocker arms * 24-tooth reluctor
( 10 )
$5,049.99
BluePrint high torque GM 377 c.i.d. base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 9.1:1 compression hypereutectic pistons. The full roller camshaft provides 0.481 intake/0.480 exhaust lift with 187 intake/193 exhaust duration at .050 with a 97 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off. We purchased the last of these new-in-the-box engines from Blueprint. This means we cannot extend a warranty from the manufacturer; however, we do offer our standard 90-day handshake guarantee. This is a last chance opportunity, once they're gone we won't be able to order more--so grab one while you can! Engine specifications: * All new and dyno tested 377 c.i.d. small block Chevy compatible engine * Cast crankshaft with hypereutectic pistons * 4.000 in. bore and 3.750 in. stroke * Aluminum heads with 67cc chamber, 1.500 in. exhaust, and 1.940 in. intake valve * Accommodates 8- or 12-bolt intake manifolds * Requires electric fuel pump (not machined for mechanical fuel pumps) * Harmonic balancer included
( 2 )
$4,799.99
Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 87 )
$2,736.99
Eagle competition rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Depending upon your selection, these kits may feature a crankshaft, pistons, piston rings, rod and main bearings, or connecting rods. Balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.
( 33 )
$2,756.99
—
$2,867.99
Billet Specialties Tru Trac serpentine systems with A/C feature easy, straightforward assembly—with no spacers or washers to fool with. The entire Tru Trac systems are designed to mount to the engine block to allow for any cylinder head/intake configuration. All hardware and fasteners are included in each kit to complete the install. Tru Trac serpentine systems with A/C include: * Powermaster 170 amp 1-wire alternator * Billet aluminum alternator fan and pulley * Edelbrock water pump * Billet aluminum water pump pulley * Billet aluminum bridge bracket * Patent-pending billet aluminum tensioner engineered specifically for each Tru Trac serpentine system * Billet aluminum tensioner pulley * Billet aluminum crankshaft pulley * Polished ARP 12-point stainless steel fasteners * Goodyear Gatorback 6-rib serpentine belt * Comprehensive installation manual * Polished Sanden SD-7 A/C compressor * Polished billet aluminum A/C compressor clutch cover * Polished billet aluminum A/C compressor manifold
( 20 )
$2,999.95
Recommended for aggressive street/strip builds with displacements up to 427 c.i. operating at or below 7200 rpm. Capable of flowing 328 cfm at 0.650 in. lift with a 4.000 in. bore size. AFR street legal 230cc LS1 Mongoose strip cylinder heads are specifically designed for Gen III Chevy Corvettes, Camaros, and trucks. LSX cylinder heads offer unmatched flow performance and feature 2.080 in. intake and 1.600 in. exhaust valves with their ductile iron interlocking valve seats. Mongoose strip heads are available with 62cc, 65cc, and 72cc combustion chambers. Structural features like AFR's trademark 3/4 in. thick head deck, a must for blown and nitrous applications, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. An exclusive new modern combination chamber design with a double quench pad area helps the LSX generate huge low and mid-lift airflow numbers.
( 7 )
$3,332.70
BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.
( 1 )
$2,099.95
—
$2,399.95
Race smart with Magnum durable competition crankshafts from Callies. Manufactured from ultra-pure AISI 4340 steel, these cranks are subjected to multiple heat treatments, giving them unsurpassed wear and strength characteristics. With their gundrilled mains and fully profiled counterweights, you may choose from an available selection for a variety of engine types. You just can't beat the proven reliability and value of Callies Magnum crankshafts.
( 2 )
$3,721.00
March Performance Style Track serpentine systems are created with a combination of high style and low price that will find favor among car enthusiasts everywhere. The systems have a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. Nearly 150 models are available, designed for fitment on specific applications. Assembly options include with or without power steering pump or A/C compressor; crankshaft pulley finish; bolt hole quantity; and water pump material. Order the replacement serpentine system recommended for your vehicle.
( 51 )
$2,002.99
—
$2,679.99
VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.
( 72 )
$2,295.99
—
$4,884.99
Utilizing the latest in computer aided solid modeling and CNC machining centers, Callies offers the best designed, highest quality crankshafts, connecting rods, and camshaft inventory available on the market today. Callies understands not everyone has the need or budget for a Magnum or billet crankshaft, but still may want a product with more to offer than their Compstar line. Callies went to work for a solution, which culminated in the creation of their Apex Series of crankshafts. The Apex crankshafts are made on the same forgings that Callies uses to make their Magnum Series but are machined by the supplier that makes the Compstar line. Like Compstar, the Apex crankshafts are finish sized and fully inspected in-house. This results in the best bang-for-your-buck crankshaft on the market. Callies takes pride in staying ahead of the competition with the latest high tech design and manufacturing advantages of their products. Callies Apex LS/LT standard features include: * Made on Callies proprietary Magnum forging * Ultra-pure, premium 4340 material machined by Callies vetted and reliable Compstar supplier * Machined by Callies vetted and reliable Compstar supplier * Nitrided for optimal hardness and wear resistance * Every crankshaft is finished and inspected in-house at Callies Limited stroke and pin size combinations * Limited stroke and pin size combinations
Not Yet Reviewed
$2,493.00
Eddie Motorsports LS S-Drive serpentine pulley drive systems for Chevrolet LS engines are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors, billet aluminum water outlet, and a SFI approved balancer. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories.
( 4 )
$2,725.00
On Sale
All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.
( 7 )
$2,595.00
—
$3,395.00
$2,335.50
—
$3,055.50
Vintage Air offers all-in-one Front Runner engine drive systems for your LS Chevy! Focusing on race technology and performance, their LS Front Runner systems provide a more dependable serpentine belt design in a super compact block mounted package. Being the smallest component package available, engine swaps into older vehicles is a lot easier! Vintage Air drive systems are available for power steering with or without pump and non-power steering applications in your choice of bright or black hard coat finishes. Vintage Air LS Front Runner systems may include: * CNC-machined billet truss-type mounting bracket * High performance water pump * Delphi-Saginaw power steering pump * 140 amp alternator * Optimized-ratio aluminum pulleys * ATI harmonic balancer * ARP polished stainless hardware * Dayco serpentine belt and OEM tensioner * Compressor clutch and tensioner covers
( 7 )
$3,255.99
—
$3,361.99
With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385
( 15 )
$4,189.99
AFR 190cc Vortec Eliminator Street cylinder heads have exceptional flow characteristics, are 50-state street legal, and the preferred choice over rebuilt factory heads. They feature 100 percent CNC-ported chambers, A356 aluminum castings, and high-quality components. These heads are recommended for street, strip, and towing engines operating up to 6,000 rpm from 350 to 383 cu. in. For performance, strength, and ease, install AFR 190cc Vortec Eliminator Street cylinder heads. Additional features include: * 3/4 in. extra-thick head deck * 2.020 in. intake and 1.600 in. exhaust valves * Center and perimeter valve cover bolt patterns * 0.100 in. raised exhaust port * Not compatible with self-aligning rocker arms
( 4 )
$2,391.90
Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.
( 1 )
$2,947.35
Scat engine rotating assemblies are available with either a high-quality Scat forged 4340 crankshaft or Scat's Series 9000 cast crankshaft, plus I-beam or H-beam connecting rods with 7/16 in. or 3/8 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application—and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe. Kits with cast and standard forged pistons have standard rings; kits with premium forged pistons have file-fit rings. Nearly 800 Scat kits are available; order the package tailored for fitment with your engine application.
( 127 )
$2,489.99
—
$3,048.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
