Availability
Showing In Stock Items. Show All 35 Items.
Since their release, Jesel Sportsman Series shaft rocker arms have proven themselves to be the ultimate replacements for inadequate stud rocker assemblies on OEM and aftermarket cylinder heads. The 2024 aluminum bodied rocker arms are designed to withstand open spring pressures of up to 900 lbs., while maintaining precise valve lash settings. They are designed to bolt on with little to no cylinder head modifications and in most cases still fit under a stock valve cover. The rocker geometry is preset and engineered using the common valve supplied with the specific cylinder head to provide a bolt-on-and-go installation. If you're still spending aggravating hours adjusting your stud rockers only to have to repeat the procedure the next weekend, Jesel Sportsman Series shaft rocker arms are your solution. Choose a set designed for your application.
( 23 )
$1,525.00
—
$1,765.00
Jesel 2-piece upper pulley belt drive systems are not just built to survive, they are built to thrive. These often-duplicated, but never-matched Jesel pulley belt drive systems are the most accurate and durable cam timing systems available. They are made with the finest materials and coatings, and then precision CNC-machined to go the distance in any race—and still be ready for more! Infinitely adjustable and track-proven to outlast chain drives, these upper pulley belt drive systems also can reduce the number of harmonics being transferred to the camshaft. Order the Jesel 2-piece upper pulley belt drive system that is designed to fit your needs. 2-piece upper pulley belt drive system features include: * 2024-T6 billet aluminum Spider * Heat-treated steel crank pulley * PTFE coated high-vacuum cam and crank seals * Grade 8 hardware * Patented HTD reinforced belt * Easy, accurate external cam timing adjustment
( 8 )
$1,505.00
—
$1,695.00
COMP Cams Xtreme XE-R modular 4-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. They are built to take advantage of the latest cam technology, to provide maximum performance.
( 2 )
$1,905.95
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$2,049.95
—
$2,171.95
COMP Cams XE-R supercharged and nitrous series modular 4-valve camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. XE-R supercharged and nitrous series camshafts from COMP Cams are available in a variety of mild-to-aggressive styles. They work with your supercharger or nitrous system to help provide the most power possible.
( 2 )
$1,905.95
COMP Cams Xtreme RPM Series modular 4-valve camshafts have been designed to increase horsepower and extend the rpm range of your engine. From stock replacements to ultimate performance, there is an Xtreme RPM cam to meet your performance goals.
Not Yet Reviewed
$1,905.95
Jesel Sportsman tie-bar roller lifters offer Jesel quality and durability at a lower cost. From mild drag engines, street/strip builds, pleasure boats to circle track, these lifters will give you the bulletproof performance you are looking for. Sportsman lifters have polished 8620 heat-treated bodies and are assembled with bronze bushing cam rollers. They also share the same roller, axle, tie-bar, and hardware found in Jesel's Pro Series line. The bronze bushings used have been tested for durability through hundreds of torturous dyno pulls and over a million cycles on Jesel's in-house Spintron. Lifters are available for select OE and aftermarket applications with a range of lifter body diameters from .842 in. to .905 in. with either offset or on-center pushrod seats. Choose the proper fit for your application. Features: * Heat-treated polished 8620 bodies * .842 in., .875 in., and .905 in. diameter bodies * Heat-treated stainless steel tie-bars * Pressurized oiling to the axle assembly ensures adequate oil supply * Heat-treated and polished tool steel roller
Not Yet Reviewed
$1,775.00
Whether you are into drag racing, circle track, road racing, marine, or just running a serious piece on the street, Jesel Pro tie-bar roller lifters are built to go the distance! Manufactured to the highest standards using the strongest materials available, lifter components are machined in-house, allowing Jesel the ability to control the finish and hold critical tolerances which far exceed current industry standards. Choose the proper fit for your application. Features and benefits: * Heat-treated 8620 bodies are DLC coated to reduce friction and body wear * .842 in. up to .937 in. diameters are available covering all popular OE and aftermarket blocks * Heat-treated stainless steel tie-bars keep lifter precisely aligned through the lift cycle * Tie-bars are retained to the bodies using Jesel designed tool steel nuts * Cam rollers with precision sorted needle bearings (standard) * Pressurized oiling to the axle assembly * Heat-treated and polished tool steel roller * Offset or on-center pushrod seats available * Optional bronze bushed cam rollers available
Not Yet Reviewed
$2,125.00
S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,854.86
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$2,029.95
These COMP Cams LS1 Gen III aluminum shaft rockers are CNC-machined for accuracy and precision alignment. They feature pressurized internal oiling to ensure long life and reduced friction. These rockers require minor valve cover machining and deliver the adjustability needed by most performance modifications.
Not Yet Reviewed
$1,623.95
—
$1,705.95
COMP Cams Stage 2 LST camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST camshaft packages include: * COMP Cams LST Camshaft * Pushrods * Valve Springs * Retainers * Valve Locks * Spring Seats * Valve Seats
Not Yet Reviewed
$1,535.95
COMP Cams LST Stage 2 blower camshaft packages offer billet steel construction and Low Shock Technology making them the perfect upgrade for GM LS engines with larger displacement or larger blower applications that include more serious additional modifications for higher rpm and more power. Available in either a Cam Kit (CK) or Master Kit (MK) that includes lifters and timing set, both are Spintron and dyno-tested. Features: * LST Low Shock Technology cam lobe profiles for increased horsepower and improved stability at higher rpm * Spintron and dyno-tested to ensure maximum power, boost response, and reliability * Packages include: Hydraulic roller camshaft, pushrods, dual valve springs, tool steel retainers, valve locks, spring seats, and valve seals
Not Yet Reviewed
$1,839.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
