Availability
Milodon Street and Strip oil pans are designed for performance street as well as drag strip applications. They will fit most stock chassis and steering, as well as most headers. These well-engineered oil pans feature internal baffling that can free up additional horsepower. They're available in deep-sump and low-profile designs and are a necessity where high-volume oil pumps and increased rpm ranges are used.
( 252 )
$399.95
—
$529.95
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 176 )
$86.95
—
$124.95
Milodon high volume/high pressure oil pumps provide a 20 to 30 percent increase in both volume and pressure, where most heavy duty and performance applications require an increase in both areas. Increased bearing loads, rpm, and horsepower all place greater a demand on the oil system, which if not up to the job, can cause premature engine failure. All Milodon oil pumps are 100 percent flow-tested to assure you the quality your engine demands.
( 28 )
$79.99
—
$125.95
Milodon 4x4 truck and off-road oil pans are designed for tough trucks and extra-rough terrain. The sump for these pans has been moved to the rear, for better oil control and more front differential clearance in long travel applications. These pans feature full horizontal baffling for oil control, and a large capacity to help control oil temperature. Unlike the competition, Milodon gives you an internal and external finish for corrosion protection. Milodon delivers a tough pan, whether your truck is used for street or full-on off-road racing.
( 29 )
$499.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$23.95
—
$99.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$17.95
—
$127.95
Milodon marine oil pans are designed to provide optimum performance for all applications. They're available for flywheel aft and forward installations, are fully baffled, trap-doored, and include windage trays. They are made from extra-heavy gauge steel to withstand extreme use and carry large oil capacities for high-rpm prop boats or high-load, heat-creating jet drive boats .
( 6 )
$609.95
—
$689.95
Do you have a new timing cover, or one that lacks a timing pointer? If so, then you clearly need a great looking pointer to complete the package. Milodon has the perfect accent to your timing cover. They will look great with your cover and are marked off with a wide span of degrees both before and after TDC, so you can get the precise timing setting that you need.
( 52 )
$6.95
—
$82.95
A good oil pump is the cheapest insurance you can buy. Milodon small block Chevy high/standard volume oil pumps were built with engineering expertise to provide the highest level of quality and reliability available. The improved housing is made of a G-10 material with 40,000 psi tensile strength. G-10 is the same rugged material that brake rotors are made of. The neck is thicker than standard pumps to improve strength and end pump neck breakage under severe conditions. They're engineered to perform well in low or high-rpm applications and are CNC-machined for precise tolerances. Every pump is 100 percent flow-tested.
( 33 )
$101.95
—
$104.95
Milodon premium roller timing chains are equal to and, in most aspects, exceed OEM-quality specifications. They feature a double-wide non-split roller design to allow for easier chain movement, yielding increased performance and longevity. These timing chains come in application-specific designs to ensure an exceptional fit, superior strength, and quality performance for your ride.
( 8 )
$98.95
—
$104.95
Milodon offers these valve cover stud kits for both universal and vehicle-specific applications. They're available in a variety of thread sizes, lengths, and quantities. The steel studs come with hex nuts for easy installation.
( 23 )
$21.95
—
$22.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 47 )
$18.95
—
$29.95
Milodon exclusive Diamond Stripper design windage trays features hundreds and hundreds of small louvers that quickly scavenge oil from crankshaft rotation, but prevents reversion common to screen-type windage trays. They are completely finished, gold irridited, and require no additional fitting for installation. Extensive dynometer and on-track testing verifies that these windage trays out-perform other screen type trays on the market. They permit rapid oil return and protection from oil splash-back, while providing increased power by reducing windage.
( 11 )
$122.95
—
$158.95
Milodon aluminum timing covers feature either a highly polished or CNC-machined face. Their rigidity offers a positive, non-flexing cam stop. They are designed to fit over stock and double roller timing chains. They're also built to fit under stock short water pumps in most cases (some will require only minor water pump modifications). Milodon timing covers will not work with 4-gear style gear drives or belt drives.
( 29 )
$122.95
—
$199.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$34.95
—
$43.95
Milodon oil pan bolt kits were specially designed to firmly hold oil pans in place and not loosen up. They feature a built-in washer face with case-hardened serrations. The washer face and small head permit the use of a socket wrench for quick and accurate installation. They can be reused time and time again.
( 63 )
$10.95
—
$15.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 94 )
$45.95
—
$96.95
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 104 )
$19.95
—
$34.95
Milodon head studs are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. They are premium-grade and race-quality, created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. These studs are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts. These studs are available for dozens of specific cylinder head style applications.
( 11 )
$118.95
—
$320.95
Overcome space limitations and change your filters with ease. Milodon oil filter adapters make oil filter changes quick and easy. They're made from high-quality materials to ensure durability.
( 10 )
$69.95
—
$73.95
No other racing valve on the market has superior materials, is lighter or will flow more than Milodon Megaflow racing valves, as proven by multiple independent engine builders and independent laboratories. These competition valves are forged from one piece of 21-4N stainless steel. They have swirl-polished heads, undercut stems for better gas flow, and tulipped underhead areas for weight savings. With their hardened stellite tips and 1,600 degree F temperature capabilities, they can withstand both high-heat and high-valvetrain stress loads.
( 17 )
$25.95
—
$259.95
Milodon balancer bolts are necessary components for any serious engine builder. When a balancer is not properly attached, not only is it dangerous, but it will not do its job of protecting the crack bearings properly. These Grade 8, heat-treated, and thread-rolled steel bolts feature a hex-style head for easy torquing and engine turning by hand. They come available in different thread sizes and underhead lengths to best suit your application needs.
( 30 )
$13.95
Milodon lifter valley screen kits provide inexpensive insurance for small block and big block Chevy racing engines--especially for dry sump applications. Designed to prevent broken parts from falling into the oil pan or pump and causing serious engine damage, these stainless steel screens affix to the old drainback holes located in the valley area of Chevy engines. The kits include instructions and epoxy.
( 8 )
$33.95
Milodon Street stainless valves are one-piece forged valves that are the perfect replacements for use in your street, Circle Track, or bracket racing engine. The intake valves are forged from quality HNV8 stainless steel, while the exhaust valves are forged from premium 21-4N material to withstand the extra heat and stress. The valves have hard-chromed stems and machined heads. They are designed to take a beating, with large seat margins which allows more than one regrind.
( 19 )
$24.95
—
$180.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
