Availability
Chevrolet Performance hydraulic roller lifters are designed as direct replacements for your engine. These lifters were designed for use by GM to be used in performance engine builds and incorporate improved valving to allow higher rpm capability- what more can you ask for?
( 64 )
$51.99
—
$553.04
These Chevrolet Performance deluxe serpentine belt drive kits include the following parts for installation. Kits include: * Belt (water pump, alternator, and power steering) * A/C belt (where applicable) * Tensioner assembly * Idler pulley * Power steering pump * Alternator and power steering pump bracket * Power steering pump brace * Power steering pump pulley * Alternator
( 1 )
$1,742.45
These LT4 Hot Cams from Chevrolet Performance are direct replacements for your stock LT4 hydraulic roller cam. They are designed to increase horsepower and torque in your LT4.
( 21 )
$593.43
These Chevrolet Performance hydraulic roller camshafts feature a special lobe pattern for balanced intake and exhaust flow. Different profiles are offered to produce maximum low, mid, or upper rpm power.
( 44 )
$350.12
—
$465.27
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
Chevrolet Performance cast iron Vortec cylinder heads will fit 1958 and later small block Chevy engines, and offer a 20 to 40 hp increase over earlier cast iron small block heads. Features include fast burn combustion chambers, and a high-velocity port design. They require the use of a Vortec-style intake and self-aligning rocker arms, and come complete with valves, springs, and retainers.
( 6 )
$691.75
Chevrolet Performance small block V8 or V6 rocker arms are available individually or in sets, and include stamped steel or aluminum rockers with mounting hardware.
( 15 )
$46.99
—
$124.84
Building a high performance vehicle? Chevrolet Performance timing chain sets are designed for use with either performance or stock cams. These timing chain sets are affordable and deliver long lasting trouble free reliability.
( 27 )
$108.39
Chevrolet Performance offers intake and exhaust valves for a wide range of applications, from 1955 and up. These replacement valves are designed to increase gas flow for more power. Strengthen your valvetrain with genuine factory-recommended parts; order the size needed for your vehicle.
( 3 )
$22.99
—
$48.99
Chevrolet Performance offers these valve springs for a variety of applications, and because they come from Chevrolet Performance, you can be assured that you're getting the right valve springs for your needs.
( 7 )
$9.99
—
$80.00
These Chevrolet Performance cylinder head bolt kits are designed for use with your GM heads. Everything is included to properly complete your cylinder head installation.
( 53 )
$60.20
—
$125.62
Swap out your old engine oil pan with a quality replacement from Chevrolet Performance. They are manufactured from durable steel or aluminum and have a black painted or natural finish. Available for different sizes and styles of engines, Chevrolet Performance parts are sure to keep the engine oil in the pan, where it belongs.
( 48 )
$229.99
If you're looking for more horsepower and torque for your engine, Chevrolet Performance Vortec top end kits may be just the ticket! These kits are available for a variety of engines, and each kit is comprised of all the pieces and part components you need to get the job done. Order the Chevrolet Performance Vortec top end kit recommended to fit your engine model.
Not Yet Reviewed
$1,582.88
These Chevrolet Performance lifter valley baffles are designed to shield your intake manifold from hot oil splash to maintain a cooler intake charge for more power. They also help to keep excess oil out of your valve covers and maintain oil pressure in the event of push rod or rocker arm failure by keeping the lifters in their bores.
( 13 )
$99.99
Chevrolet Performance offers an assortment of durable bolts for use on your camshaft installation Choose from among various materials, including steel and chromoly; finishes such as black oxided and natural; lengths, head styles, and thread sizes. These bolts are available for a wide range of engine sizes and camshaft component applications.
( 30 )
$2.99
Chevrolet Performance bellhousing dowel pins allow you to easily align your transmission into the block. Correct alignment provides clean clutch release, while maximizing pilot bearing and transmission life. Chevrolet Performance bellhousing dowel pins also help to reduce shifter problems.
Not Yet Reviewed
$7.99
Do away with those annoying oil leaks and add some style at the same time, with Chevrolet Performance diecast aluminum valve covers. The durable diecast construction resists warping and keeps its shape at the rails, for excellent gasket sealing. Most covers are available with smooth tops in polished or black crinkle painted finishes for small blocks, or black with brushed, shallow ribbed tops for big blocks. All diecast covers feature the famous Bowtie and Chevrolet script logos, and have a variety of breather hole configurations to suit nearly any application.
( 52 )
$355.61
—
$954.06
Chevrolet Performance factory replacement dipsticks offer an easy upgrade when your original becomes loose, bent, or otherwise dysfunctional. These steel engine oil dipsticks are available in a variety of finishes—and for countless application-specific vehicles.
( 51 )
$28.99
These oil filter adapters from Chevrolet Performance mount a spin-on cartridge oil filter. They contain a filter bypass valve.
( 40 )
$14.99
—
$68.99
These Chevrolet Performance camshaft locking plates are designed to keep your camshaft where it belongs. They feature steel construction and install easily without any special modifications. Available for different types of engines, Chevrolet Performance camshaft locking plates will keep your camshaft in place throughout the entire engine operating range.
( 12 )
$21.99
These Chevrolet Performance pushrod guideplates are intended for use in high-rpm motors. They're designed to keep your pushrods in line with your lifter cups and rocker arms and prevent deflecting or walking sideways. These guideplates are hardened to prevent them from wearing prematurely.
( 12 )
$12.99
Chevrolet Performance oil pumps are offered for an extensive range of cars, trucks, vans, and SUVs. Made from high-quality materials by a name you trust, they're available in both wet and dry sump styles, as well as standard and high-volume. Order the oil pump model designed for fitment on your vehicle application.
( 9 )
$222.99
Keep your lifters in their proper place with these Chevrolet Performance lifter guides! These guides feature durable steel construction and are offered for a variety of applications.
( 5 )
$7.99
These CNC-machined aluminum Fast Burn cylinder heads from Chevrolet Performance are designed for 1958-2000 283-400 c.i.d. Chevy V8s. They quickly and completely burn the air/fuel mixture, ensuring higher cylinder pressure and more power. No additional porting is required--Chevrolet Performance Parts' cast-ported technology gives these heads maximum performance right out of the box. They're drilled and tapped for Vortec and raised port manifolds, they accept flange-mount or centerbolt-style valve covers, and will support in excess of 500 HP.
Not Yet Reviewed
$1,514.83
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
