Availability
Showing In Stock Items. Show All 220 Items.
Our Summit Racing™ brass freeze plugs were designed for marine use, but you landlocked guys will get a lot of use out of them, too. All of the necessary plugs are included.
( 102 )
$19.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable Chrome or Black Powdercoated finish for good corrosion protection and long life. Get yours today.
( 183 )
$16.99
—
$17.99
These Summit Racing™ camshaft bearings are just what you need to freshen up your engine. Why? They use silicon aluminum bi-metal construction. Silicon aluminum is the choice for many of today's engine manufacturers because of its high fatigue strength and superior temperature threshold. Bearing wear is dramatically reduced and the fatigue strength is greatly improved.
( 65 )
$20.99
Wrap up your engine build with BluePrint Engines' oil and filters. Their oil filters are available for your SBC/BBC, SBF/Mopar, and LS-style engines. These filters are high-quality, canister styles recommended by BluePrint with premium filter media.
( 12 )
$13.95
Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability.
( 95 )
$13.99
—
$18.99
Melling replacement hydraulic lifters are perfect for when you're ready to freshen up your engine. Melling has designed these lifters to be within factory tolerances for the perfect fit. They are affordable and available as flat or roller lifters.
( 38 )
$11.99
—
$17.99
Melling Automotive Products manufactures a complete line of heavy-duty oil pump intermediate driveshafts. These shafts are made of stress- and fatigue-proof steel for maximum strength and durability. They're available for thousands of vehicle and engine family applications.
( 177 )
$11.99
—
$15.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 162 )
$11.99
—
$18.99
Why cover up your timing set with a plain-Jane stock timing cover, when you can bolt on one of these Summit Racing™ timing covers? They offer an outstanding package with features like a durable finish and heavy stamped steel or aluminum construction. To make your life easy, they're designed to fit with most timing chains and under-the-cover gear drives. The covers are available with bolts, gaskets, a seal, and a timing pointer, or without the hardware for those of you who want to put together your own combination. Choose the finish you prefer and order the timing cover to fit your particular make and model.
( 126 )
$16.99
—
$19.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 164 )
$10.99
—
$18.99
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
—
$20.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
These Summit Racing™ arm stud kits are made of alloy tool steel. They're roll-threaded, heat-treated, and have a black oxide corrosion-resistant finish. They feature larger radius stud fillets for extra strength, and they're designed for use with or without guideplates.
( 32 )
$13.99
—
$14.99
ARP has designed these extra heavy-duty oil pump driveshaft kits to provide you with the reliability you need. Made from heat-treated chromoly steel, they are larger in diameter than the OEM unit. This enables the ARP shafts to handle the added torque requirements of increased oil pump capacity or heavy-viscosity lubricants. Rated at 220,000 psi, ARP oil pump driveshafts are ready to do the job.
( 248 )
$16.99
Summit Racing™ offers alternator brackets for a wide range of applications. Our heavy-duty brackets secure your alternator and your budget. They're available in a variety of styles for mounting in different positions. The brackets are machined from steel or billet aluminum, with your choice of finish. Order the model designed for your alternator application.
( 334 )
$10.99
—
$23.99
Anchor your valve covers in style! Edelbrock black valve cover hold-down tabs are designed to be used on all Edelbrock Signature series and other similar-design steel valve covers. Available for big and small block Chevy applications, these hold-down tabs add a nice finishing touch to your setup. Order the set designed for your application.
( 13 )
$19.95
Melling Performance PRO-Line pushrods give you the reliability that you need from your valvetrain. They are manufactured from high-quality carbon steel, are hardened for use with guideplates, and exceed OEM specifications. Their pushrods also feature close-tolerance wall thickness and a centerless ground to make sure that they are a matched set. Choose Melling Performance PRO-Line pushrods to keep your valvetrain operating efficiently.
( 6 )
$10.99
—
$18.99
Pioneer offers these OEM replacement rocker arm studs for a variety of applications. They're machined from high-quality alloy steel for strength and reliability. The studs are available in various lengths and thread sizes for direct fitment on specific cylinder heads.
( 40 )
$21.69
—
$21.79
Professional engine builders are familiar with camshaft walk. Excessive camshaft end play can produce erratic spark timing and the movement of the timing chain/gear can destroy the timing cover. Moroso has solved this problem with a wear resistant cam stop button that mounts in an aluminum holder, which bolts to the cam gear by way of a retaining plate. These button assemblies do not allow the cam to walk forward, stabilizing ignition timing and preventing costly engine damage.
( 18 )
$27.99
You need guideplates to keep your pushrods from deflecting under high-rpm conditions. That's just what our Summit Racing™ guideplate sets do--and for less than what some guys charge for theirs.
( 46 )
$15.99
Securing your timing cover is easier than ever with ARP timing cover bolt kits. You can choose between polished stainless steel and chromoly black oxide finishes. They are available in your choice of standard hex or compact 12-point style heads, and washers are included.
( 229 )
$11.99
—
$17.99
When you need to replace your stock oil pump driveshaft, try Summit Racing™. Our driveshafts are quality-made, stress-proof steel shafts priced economically to fit your car and your wallet. These standard replacement steel oil pump driveshafts include steel sleeves and will provide maximum strength and durability. Are you looking for replacement parts? Look to Summit Racing™ for hard-to-beat quality and pricing.
( 11 )
$16.99
Treat your Brodix heads to a set of new valve guides. Their replacement valve guides are made from premium materials, like phosphorous bronze, manganese, soft steel, nickel, and more in a large selection of diameters and lengths. Complete the valve guide work for your cylinder heads with replacements from Brodix.
( 1 )
$12.99
P-Series rod bearings are the oldest members of the Clevite 77 performance bearing family. They're intended for high-revving engines, especially those where the high rpm cause the rod bores to narrow. To compensate for this distortion, these direct replacements have higher eccentricity and a high crush factor. Clevite P-Series rod bearings are built on hardened-steel backings with extra-thin overlays, and their lower sections have dowel holes for use with aluminum rods, and there are extra-clearance variations available with an additional 0.001 in. of clearance. Order the model designed for your vehicle and engine application.
( 286 )
$10.99
—
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
