Availability
Ford Performance Parts 4.6/5.4L 3-valve cam covers are designed to bolt on to your late model Ford 4.6/5.4L V8 engines. They are made of cast aluminum and are available in different powdercoated finishes to match your style. They include cam cover gaskets, VCT solenoid grommet, and fasteners. Ford Performance Parts 4.6/5.4L 3-valve cam covers are 50-states street legal when installed with the appropriate closed PCV hardware.
( 27 )
$379.99
Ford Performance Parts 5.0L Coyote timing cover and cam cover kits will provide you with the entire front and top-end sealing components needed to complete a 5.0L Coyote engine build or restoration project. You'll receive a variety of parts, including cam covers, an idler pulley, crankcase vent fittings, and more. Plus, all components in each kit are Ford Performance Pack quality—durable upgrades for your Pony car. OE-style engine dress-up kits include: * (1) Oil fill cap * (1) LH crankcase vent fitting * (1) RH crankcase vent fitting * (1) Idler pulley * (1) Idler pulley bolt * (1) Damper bolt washer * (1) Dipstick and tube * (1) Cam cover (RH) * (1) Cam cover (LH * (5) Front cover bolts and washers * (2) Front cover studs * (1) Front main seal * (8) Water pump and front cover bolts * (4) M6 x 22mm oil pan bolts
Not Yet Reviewed
$422.99
COMP Cams billet LS valve covers start from a block of billet aluminum and end with a stunning anodized finish. Specifically designed for your LS engine, these valve covers will fit with an easy installation. Put these COMP Cams billet LS valve covers on your shopping list and upgrade the look of your engine bay.
( 2 )
$612.99
Russell twin cam vent lines are designed to replace the OEM rubber vent hose that runs from your engine crankcase to the transmission housing.
Not Yet Reviewed
$66.99
Ford Performance Parts 5.0L/5.2L aluminum valve covers allow much greater dissipation and protection from exhaust manifold heat, thanks to the included foil tape along the cylinder head mating surface. This pair of cam covers retain factory coil cover provisions and the oil separator drain-back port that can be used with air/oil separator kits. Ford Performance Parts 5.0L/5.2L aluminum cam covers fit 2011-17 5.0L and 2015-19 5.2L engines. Features, items, and notes: * Can be powdercoated to customize your vehicle * 1 pair of camshaft (valve) covers * Camshaft cover gaskets * VCT solenoid grommets * Fasteners * Engine oil cap * F-150 engines will require the Coyote cam cover ball stud kit (M-6067B-F150) to install coil covers
( 20 )
$315.99
On Sale
Holley aluminum LS valve covers will give your Chevrolet LS Series engines a totally new look. Manufactured from cast aluminum, they come in four different finishes, and feature a billet aluminum oil fill cap. Some valve covers in this series eliminate the need for the factory ignition coil bracket. Instead, the coils bolt directly to the valve covers for a nice angled look! Holley aluminum LS valve covers reuse the factory gaskets and bolts, will work with .750 in. lift camshafts using stock-style rocker arms, and fit all ignition coils with 72mm spacing.
( 142 )
$849.95
$147.95
—
$749.95
On Sale
Enhance the look of your engine with a pair of Scott Drake classic aluminum valve covers for small block Ford engines. Diecast from high-quality aluminum alloy, the covers are available in more than a dozen styles to customize your ride. Finish options include polished, black, black wrinkle, and black powdercoat. These valve covers also feature a cadmium plated oil filler tube to help stop corrosion, an improved oil baffle design to accommodate high-lift cam shafts—and will work with most roller rockers. Order the model designed for your vehicle application.
( 183 )
$249.95
$135.95
—
$631.95
Edelbrock's Signature series black valve covers are engineered for function and styled for good looks. They feature a powdercoated finish for long lasting good looks, and have stock-style breather baffles that prevent oil passage to the PCV valve. They accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The Edelbrock Signature Series black valve covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock, and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 123 )
$59.95
—
$97.95
On Sale
Holley's 2-piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a Ford style overcover that hides the unsightly LS coils and messy wiring harness. This allows the full performance benefits of coil-on-cover ignition setups without the robotic styling. These coil covers also feature cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, plus dress-up hardware and rubber grommets for the coil covers. The modular LS valve covers are available in three custom finishes: natural cast, polished, and satin black. Features: * Cast aluminum 2-piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies * Retain the performance of factory coil-on-cover ignition without the unsightly styling * Coil cover features vintage Ford valve cover styling and cast-in wiring provisions * Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750 in. lift cam with stock-style rocker arms * Base features internally baffled ventilation system * No coil relocation, wire harness extensions, or custom spark plug wires required * Includes low-profile billet oil fill cap * Includes all necessary coil mounting provisions and dress-up hardware
Not Yet Reviewed
$481.95
—
$573.95
$265.95
—
$515.95
Edelbrock's Signature series chrome valve covers are engineered for function and styled for good looks. They're triple chrome plated for long lasting good looks and have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valves, and include rubber grommets for the breather and PCV valve holes. The covers clear most aluminum rocker arms and moderate lift cams. Some applications come in a high-profile design that's 1 1/4 in. taller than stock and clears most roller rockers and valvetrain components, and a low-profile design that clears air conditioning and alternator brackets.
( 158 )
$59.95
—
$125.95
Granatelli Motor Sports valve covers give your engine a super clean look! Manufactured from either cast or billet aluminum, they come in different finishes and include an aluminum oil fill cap. One of the great features of these covers is the elimination of the ugly steel factory coil bracket—Granatelli valve covers float the coils directly from the covers with a functional angled look. The tall version LS valve covers include new stanchions and gaskets. They are designed to work with .750 in. lift camshafts using stock-style rocker arms and fit ignition coils with 72mm spacing. Order the valve covers designed for your vehicle application.
( 1 )
$205.49
—
$249.38
On Sale
Add an original touch to your rig with a set of Crown Automotive valve covers. They're constructed out of durable materials to withstand the test of time. Crown Automotive valve covers offer increased internal clearance for oversized camshafts and high-clearance rocker arms. These stock replacement parts come available in multiple finishes to customize the look of your vehicle.
( 3 )
$48.99
—
$87.99
$44.09
—
$79.19
On Sale
Holley modular LS Pontiac-style valve covers feature an OE height, internally-baffled base with integrated coil mounts for popular Gen I and Gen V-style LS coil bodies. The overcovers hide the unsightly LS coils and messy wiring harness—allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simulated oil fill cap which helps maintain the original Pontiac styling. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness, so no extensions or custom wiring is required. Holley's 2-piece LS Pontiac-style valve covers offer a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation! More product features and items include: * Available in various finishes * Base fits LS1, LS2, LS3, LS6, and LS7 engines with clearance for 0.750 in. lift cam with stock style rocker arms * Base features internally baffled ventilation system * Each 2-piece LS valve cover set includes a low-profile billet oil fill cap, 2 billet simulated fill cap assemblies, hardware, and spacers for mounting both versions of LS coil bodies * Dress-up hardware and rubber grommets for the coil covers
( 1 )
$586.95
$527.95
—
$599.95
R&M Specialties Quick Release valve covers are designed specifically for Big Block Chevy engines. Their patented, innovative high-tech design gives you a true quick-release removable top. With strong cam locking billet machined hinges, a heat resistant O-Ring insures a positive seal. No more time consuming bolts or stripped threads! Features include: * Quality cast aluminum construction * Custom machined to specifications * Strong cam locking billet machined aluminum hinges to allow ample clearance for all rocker arms and stud girdles * Heat resistant o-ring to insure a positive seal * Hand polished to a mirror finish
Not Yet Reviewed
$2,529.99
On Sale
Put your Holley pride on display with a set of attractive Vintage Series valve covers. Their die-cast aluminum construction ensures high detail, while reducing the opportunity for oil leaks and warping of the flange. Choose from among a half-dozen finishes to give your engine a clean, professional look. The vehicle-specific covers are available for every model year dating as far back as 1958.
( 33 )
$699.95
On Sale
Holley M/T valve covers are flashbacks to 1972. Nothing was cooler than cruising in your hot rod with a Holley double pumper and M/T finned aluminum valve covers. Each Holley M/T valve cover is precision-manufactured with knockout plugs for stock PCV and oil fill installations. These covers feature polished top cover surfaces that may be used for engraving your name horizontally next to the deep heat dissipating fins. Available in your choice of black crinkle or a polished finish, each Holley M/T valve cover comes in retro packaging styled after the original. Order the pair designed for your engine application.
( 30 )
$599.95
$242.05
—
$538.95
Summit Racing™ fabricated aluminum valve covers offer you lightweight covers without the heavyweight price. Our tall 6061 aluminum valve covers will clear most of the popular rocker combinations and we have a choice of valve cover set ups, as well as finishes, to provide you with exactly what you need. All set-ups include the appropriate fasteners to make your install easier. Get the most for your dollar and breathe easy with Summit Racing™ fabricated aluminum valve covers.
( 55 )
$299.99
Summit Bucks
ACDelco offers valve covers for a wide range of vehicle and engine applications. They're available in many styles, materials, finishes, and other options—combining performance and good looks under the hood. Their durable construction resists warping and maintains shape at the rails for excellent gasket sealing. Nearly a hundred models are available; select the replacement valve covers recommended for your ride.
( 1 )
$152.99
—
$307.99
Summit Bucks
ACDelco GM Genuine Parts PCV valve hoses are a GM-recommended replacement component for you vehicle. These original equipment hoses will provide the same performance, durability, and service life you expect from General Motors. They are manufactured to OE specification for fit, form, and function so you can expect these hoses to fit the same as they did coming off of the assembly line.
( 15 )
$18.99
—
$34.99
Summit Bucks
ACDelco GM Genuine Parts PCV valve tubing is designed, engineered, and tested to rigorous standards, and is backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. These positive crankcase ventilation tubes are made from factory materials and specs in a variety of configurations. They're available for hundreds of vehicles from 2014 and up.
Not Yet Reviewed
$52.99
Dorman PCV breather hoses can help maintain engine life and performance. They are direct replacements to keep your vehicle running in top form. Brittle or clogged hoses can cause emission problems. New PCV breather hoses, tubes, and elbows from Dorman are original equipment solutions designed to head off problems and prolong your positive crankcase valve's proper operation. Preserve your PCV system--install new breather hoses from Dorman.
( 27 )
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
