Availability
Showing In Stock Items. Show All 191 Items.
Moroso one-piece push-in valve cover breathers are designed to drain oil trapped in their foam filter elements back into the valve covers, rather than allow it to drain out of the air vents or get into the air cleaner. These breathers are available in several colors and finishes. They'll fit all Moroso valve covers, as well as any other covers with a 1.22 in. hole. Some have 90 degree nipples to feed vapor into the air cleaner, and an installation grommet is included.
( 36 )
$18.99
—
$19.89
ARP valve cover bolt kits are offered in a choice of chromoly steel with a black oxide finish or corrosion-proof polished stainless steel. You also have a choice between hex head and easy-access 12-point designs. The heads feature a wide base for better load distribution and sealing.
( 264 )
$10.99
—
$19.99
Allstar Performance valve cover breathers are offered in shielded and non-shielded versions. These aluminum breathers can be used on valve covers with breather tubes.
( 15 )
$10.99
—
$12.99
Top-off your engine dress up project with these good looking air breather caps from Proform. They come in your choice of a chrome plated steel or black crinkle finish.
( 109 )
$15.95
—
$21.95
In the market for high performance breathers for your high performance needs? Well, listen up, direct from Edelbrock, these circle track breathers have a chrome plated top for lasting shine and are stamped with the Edelbrock name--so they are ideal for high-rpm, high-performance applications. The oiled-cotton, gauze and screen elements have very low restriction--and they're washable! These washable breathers are available in a choice of push-on or clamp-on styles to suit your needs.
( 13 )
$20.95
Control what your PCV system allows back into your highly tuned combustion chamber with Keyser Manufacturing valve cover breathers. They prevent less-than combustible byproducts from being recycled into the combustion chamber, causing a buildup of crud on your valves and a less-than-optimal mixture in your combustion chamber. These breathers allow vapors to escape while catching any sludge, preventing it from leaking over your engine block.
( 6 )
$10.99
—
$12.99
Earl's Performance PCV fittings for GM LS allow easy installation of a catch tank on the GM LS racing engines that have a PCV fitting on the OE valve cover. These breather adapter fittings have a 3/4 in. O.D. that fits into the OE grommet instead of the stock PCV fitting. Choose from fittings with -8 AN or -10 AN male flare. They're ideal for use in racing applications that require the use of a catch tank.
( 9 )
$16.81
Anchor your valve covers in style! Edelbrock black valve cover hold-down tabs are designed to be used on all Edelbrock Signature series and other similar-design steel valve covers. Available for big and small block Chevy applications, these hold-down tabs add a nice finishing touch to your setup. Order the set designed for your application.
( 12 )
$13.95
—
$19.95
Edelbrock oil fill hole plugs are designed to plug the oil fill hole on any of Edelbrock's Signature series or similarly designed valve covers with a 1.25 in. hole. They're made of high-quality material with chrome finish and recessed Edelbrock script logo.
( 19 )
$15.95
Ford Performance Parts valve cover grommet sets can be used to convert twist-in breather cap installations to push-in type, and will accept Ford PCV valves. These universal grommet sets will fit all types of valve cover applications. Three sets are available: The grommet service kits include one air breather grommet and one PCV grommet; the breather cap grommet sets include two air breather grommets; and the PCV grommet sets include two PCV grommets.
( 28 )
$14.99
These valve cover breather caps from Ford Performance Parts are a great looking way to cap off your valve cover oil fill holes. They're available in several styles and attachment types to add a custom touch to your valve covers.
( 31 )
$19.99
—
$20.99
Proform GM licensed replacement valve cover bolt and washer kits are designed to secure your center hold-down valve covers. They're direct replacements for use with Proform's late model die-cast valve covers.
( 17 )
$20.95
These valve cover stud kits from Moroso are designed to prevent valve covers from vibrating loose in competition. They're available in several styles to cover various applications.
( 15 )
$17.99
—
$19.99
K&N reusable synthetic crankcase vent filters are manufactured with a non-oiled, synthetic woven media to assist with capturing excess oil blowby and provide a more breathable filtration surface for escaping crankcase vent gases.
( 37 )
$14.99
—
$20.99
These Proform oil filler caps are available two different ways: A push-in style with an embossed Bowtie to complement the genuine factory-parts appearance of the engine; and a twist-on style with a large white-on-blue, epoxy-coated GM emblem in the center. Either one is sure to get your attention.
( 40 )
$14.95
Moroso breather grommets with integral baffles are designed for use with valve covers that do not have an oil control baffle system. They are made from oil-resistant rubber and will fit into any valve cover with a 1.22 in. diameter hole, replacing the OEM-style grommets. The built-in baffles provide oil control. Note: These breather grommets will not clear stud girdles.
( 28 )
$10.99
—
$12.99
Ford Performance valve cover hold-down mini-nuts are the perfect way to finish up your engine dress-up project. Small and unobtrusive, each mini-nut has a hex head with 1/4 in.-20 threads and 1.375 in. long studs are included. Washers are sold separately. These engine valve cover accessory parts are made from high-quality steel and are available in either chrome or black crinkle finishes to give your engine a custom look. Sold as a set of four.
( 2 )
$19.99
Proform valve cover mini nuts are offered in a variety of materials and finishes to suit your needs. Studs are included for correct gasket positioning.
( 27 )
$21.95
Moroso 14 gauge aluminum valve cover breather baffles are designed to mount inside your Moroso valve covers under the breather hole. They'll keep oil from getting into the breather, which will increase the breather's life. They include all necessary mounting hardware.
( 10 )
$16.99
Add rim screws the easy way with these Summit Racing™ rim screw templates. Made from aluminum they perfectly space 16 rim screws on 15 in. wheels.
Not Yet Reviewed
$17.99
Edelbrock PCV valve cover grommets are available for a variety of applications, including dozens of Jeep and American Motors vehicles from the 1960s and '70s. These rubber accessories are ideal and affordable components to complement your V8 intake manifold.
( 6 )
$14.95
Summit Bucks
Despite their importance, valve cover grommets are often overlooked--and if they're not replaced in time, leaks can easily occur. Fel-Pro offers a range of quality replacement sealing solutions, including these valve cover grommets. They provide reliable, leak-free sealing to help keep your vehicle operating at peak efficiency. The Fel-Pro grommets meet or exceed OE specifications and are validated to provide accurate fit, form, and function.
( 11 )
$12.99
—
$20.99
Granatelli Motorsports valve cover breathers are a beautiful finishing touch for your valve covers. Made from high-quality materials, they are available with or without vacuum ports.
( 11 )
$15.96
On Sale
Mr. Gasket flat black valve cover breathers add a stealth appearance to your engine compartment. They are available with or without a PCV fitting and offer a fast and easy way to customize your under-the-hood look.
( 18 )
$27.37
$11.29
—
$15.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
