Availability
Give your engine an aggressive, custom look with a pair of GM licensed slant edge valve covers by Proform. The diagonal cut of the top section ensures no mess, and the bottom lip will give a tight seal. Each of these valve covers is designed to clear roller rockers and stud girdles. They're available in a variety of styles and finishes for applications from the 1950s and up.
( 211 )
$254.95
—
$459.95
Proform stamped steel valve covers are 20 percent thicker than typical aftermarket valve covers. This greatly reduces the likelihood of leakage around the valve cover flange area caused by fasteners being over-torqued. These heavy-gauge steel covers are officially licensed GM products and bear the Chevrolet logo and Bowtie Emblem, unless otherwise specified. They're available in both tall and short heights, with either a chrome or black crinkle finish. Oil-restricting baffles are offered in many valve covers, for those who want to maintain the PCV hookup; and all covers are supplied with grommets for use with an air breather and PCV valve.
( 311 )
$85.95
—
$214.95
If you have been looking for great looks in an easy-to-install package, look no further than Proform GM licensed Chevy engine dress up kits. The valve covers are constructed of heavy-gauge steel to reduce leakage around the flanges and have the Bowtie Emblem embossed into them. They come in your choice of three finishes: triple chrome plated for a durable, long-lasting shine; black crinkle for little cleaning; or high-tech metallic gray.
( 111 )
$169.95
—
$339.95
Get rid of those boring, old valve covers and put on a set of GM-licensed diecast aluminum Chevrolet valve covers from Proform. These premium covers feature stout diecast aluminum construction with thick gasket rails to resist unwanted oil leaks. They are equipped with GM-designed baffles, so you can be sure they'll work well. The covers have recessed Bowtie and Chevrolet logos that are inlaid with classic Chevrolet red. They're available in your choice of chrome plated, black crinkle, or polished finishes.
( 179 )
$211.95
—
$349.95
Offering polished performance, Proform slant edge diecast aluminum valve covers aren't just another pretty face. They're made from an innovative mold design that delivers generous internal clearance. These tall covers feature a removable baffle and include grommets. Plus, the price is pretty sweet, too! Top your cylinder heads with the performance and value of Proform slant edge diecast aluminum valve covers.
( 38 )
$271.99
—
$423.95
Top-off your engine dress up project with these good looking air breather caps from Proform. They come in your choice of a chrome plated steel or black crinkle finish.
( 108 )
$6.99
—
$31.95
Proform stamped steel Mopar valve covers offer a heavy dose of visual appeal under the hood. The vintage Mopar emblem has been embossed into each steel valve cover, then hand-painted with a shade of blue that matches engine blocks of that era. Oil-restricting baffles are pre-installed, and the valve covers come equipped with air breather and PCV grommets (unless otherwise specified). Sold in pairs, the covers are offered in chrome plate or black crinkle finishes, and will make a great addition to any Chrysler engine. Order the valve covers in application and finish to make your Mopar stand out!
( 40 )
$84.95
—
$127.95
Proform GM licensed Collector's Series slant-edge valve covers top your small block with aggressive looks and innovative design. These premium die-cast valve covers have more internal clearance than most, and the raised Bowtie Emblem with Chevrolet lettering adds standout looks. These baffled covers include grommets and are available in a choice of powdercoated colors. Crown your engine with show-quality Proform GM licensed Collector's Series slant-edge valve covers--your small block never looked so good!
( 11 )
$269.99
—
$353.99
Proform Mopar Licensed small block engine dress up kits feature a great looking chrome or black crinkle powdercoated finish with their new signature blue MOPAR emblem! Made from high quality pre-polished steel, these kits include a pair of tall, baffled engine valve covers, one 14 in. diameter carburetor air cleaner, 10 valve cover wing nuts, one push-in valve cover breather, and two valve cover grommets. These officially licensed MOPAR products are designed to fit small block (LA) MOPAR engines. Add more style under-the-hood with a Proform Mopar Licensed engine dress-up kit.
( 8 )
$264.95
No more stamped steel breather caps for aluminum valve covers! Complete your engine dress-up look with a breather cap that actually matches your look! These Proform Slant-Edge aluminum push-in breather caps are available in five different finishes, and with just about every bowtie emblem configuration imaginable.
( 57 )
$37.95
—
$41.95
Made from high-quality black rubber, these Proform grommet sets will fit valve covers with 1.22 in. holes. They seal breather caps, oil filler caps, and PCV valves to your valve covers to prevent vacuum leaks and the loss of oil. These kits include two grommets--one for push-in air breathers, and one for PCV valves.
( 23 )
$4.99
—
$7.95
Proform GM-licensed valve cover hold-down clamps spread the load over a wider area, minimizing the distortion of the valve cover flanges. This greatly decreases the possibility of oil leakage.
( 19 )
$22.95
—
$26.95
Proform Mopar Licensed big block engine dress up kits feature a great looking chrome or black crinkle powdercoated finish with their new signature blue MOPAR emblem! Made from high quality pre-polished steel, these kits include a pair of tall baffled engine valve covers, one 14 in. diameter carburetor air cleaner, 12 valve cover wing nuts, one push-in valve cover breather, two valve cover grommets, and one timing chain cover. These officially licensed MOPAR products are designed to fit big block B and RB MOPAR engines. Add more style under-the-hood of your prized big block Mopar with a Mopar Licensed big block engine dress-up kit from Proform.
Not Yet Reviewed
$317.95
Dress up the valve covers on your Chevy with these great looking wing nuts. The lower ends of the shafts are made with wide shoulders for broad load distribution, and each wing nut is supplied with a separate stud which permits precise gasket positioning on the head prior to mounting the valve cover.
( 16 )
$13.99
—
$35.99
Proform offers valve cover breathers in a variety of top styles and finishes. They allow more fresh airflow down into the crankcase, increasing the cycle of oil vapor flow out of the crankcase. Order the look preferred for your engine bay.
( 14 )
$16.99
—
$21.95
These Proform oil filler caps are available two different ways: A push-in style with an embossed Bowtie to complement the genuine factory-parts appearance of the engine; and a twist-on style with a large white-on-blue, epoxy-coated GM emblem in the center. Either one is sure to get your attention.
( 38 )
$6.99
—
$14.95
Proform GM licensed replacement valve cover bolt and washer kits are designed to secure your center hold-down valve covers. They're direct replacements for use with Proform's late model die-cast valve covers.
( 16 )
$20.95
Proform valve cover mini nuts are offered in a variety of materials and finishes to suit your needs. Studs are included for correct gasket positioning.
( 27 )
$21.95
These GM licensed super-light fabricated aluminum valve covers from Proform feature recessed Bowtie and Chevrolet emblems inlaid with classic Chevrolet red. Other features include: * Welded billet mounting rails for maximum leak resistance * Each weighs just under 1.5 lbs. * 45 percent lighter than comparable stamped steel die-cast valve covers * Ideal for race or street use
( 1 )
$247.99
Secure your valve covers in style with these universal valve cover fasteners from Proform. They're available in a variety of styles and finishes to suit your application.
( 8 )
$10.99
—
$18.99
If you're looking for a nice set of valve cover hold-downs, than look no further. Proform offers these chrome valve cover hold-downs that definitely add a nice touch to your engine compartment.
( 11 )
$8.99
—
$9.99
Proform LSX-DR valve cover bolt kits are the necessary components you'll need to mount Chevrolet LS valve covers to your LSX-DR heads. These unique mounting studs feature stainless steel fasteners. For proper mating of your Bowtie valve covers and LSX-DR cylinder heads, order valve cover bolt kits from Proform.
( 2 )
$27.99
These Proform Mopar engine dress up kits are ideal for customizing engines and enhancing the appearance of your engine compartment. All parts are chrome plated for lasting beauty.
Not Yet Reviewed
$264.95
—
$317.95
Proform Mopar Licensed valve cover fasteners feature design cues that set them apart from the competition. Available in black crinkle or chrome finishes, they are manufactured from high-quality steel and designed with wide shoulders are the lower ends of the wing nut shafts for broader load distribution. Each is supplied with a separate stud, which permits precise gasket positioning on the head prior to mounting the valve covers. Proform Mopar valve cover fasteners prominently display the Omega emblem in signature blue inlaid paint on pentagon-shaped heads—reminiscent of the early days of the Chrysler Pentastar.
( 1 )
$33.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
