Pistons, Rings, Wrist Pins, Bushings & More

JE Pistons LS1 Extreme-Duty FSR Pistons

JE Pistons LS1 Extreme-Duty FSR pistons utilize JE's dedicated forged side relief (FSR) forging that was specifically designed for the demands of the GM LS1 Series of engines. They have also incorporated features to reduce weight and maintain the durability needed for both street and racing use. Lightweight and extremely durable, these LS1 pistons are machined for 1.5/1.5/3.0mm rings. Select the size needed for your engine. Features: * Accumulator grooves * Offset wrist pin (only on .927 pin diameters) * Round wire locks

Not Yet Reviewed

$149.99

JE Pistons LS Series Flat Top Pistons

JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications, and they have been performance-proven in victory lane time and time again with the ultimate combination of durability and performance. JE Pistons LS Series flat top pistons are single replacements. Available in different bore sizes for right or left, the pistons are specifically engineered for extreme applications up to, and including, professional competition. In such environments, the higher compression ratios and boost necessitate the high-tensile strength of forged 2618 aluminum construction. The skirts feature a proprietary Forged Side Relief (FSR) forging design that minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin. High-quality, case hardened 5115 low carbon steel wrist pins and retainers are included. Equip your engine with the best in forged pistons—JE Pistons.

5.0 out of 5 stars ( 1 )

$199.99

Summit Racing™ Pro LS Forged Pistons

The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available

4.58 out of 5 stars ( 72 )

$649.99

Mahle Original OE Replacement Pistons

Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.

4.0 out of 5 stars ( 7 )

$52.99

—

$385.99

Mahle PowerPak Piston and Ring Kits

Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.

4.95 out of 5 stars ( 22 )

$874.00

—

$1,003.81

ICON Premium Forged Pistons

ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!

4.79 out of 5 stars ( 43 )

$806.72

—

$892.61

Mahle LSX Combo PowerPak Piston and Ring Kits

Mahle Motorsports offers GM LSX Combo PowerPak piston and ring kits, designed for high-output, naturally aspirated, power-adder applications. These Combo PowerPak kits offer the best of strength in an all-forged aluminum alloy piston to allow for increased detonation resistance, and a combination valve pocket design that will cover LS1, LS3 and LS7 cylinder heads. Features and benefits of these LSX Combo kits include: * PowerPak pistons are all dual-coated with Phosphate coating to provide the piston's characteristic gray appearance (dry lubricant provides a lubricant film protection in the pin bores and ring grooves) * Each slipper skirt is treated with Grafal; Mahle's proprietary coating to reduce wear, drag, scuffing, friction, and piston noise * If the valve pocket layout is unknown when assembling the short block, these pistons will accommodate an LS1-style cathedral port, LS3-style rectangle port, and also LS7-style cylinder heads * With listings for flat tops, dishes, and domes, these Combo PowerPak piston kits will not lock you into a single configuration, allowing for changes that can be made, as needed * Compression ratios are available from 10:1 and cruise all the way up to 14:1 with bore options ranging from 4.000 in. to 4.185 in.

4.0 out of 5 stars ( 4 )

$812.36

—

$960.23

Hastings Premium Ductile Ring Sets

Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.

4.52 out of 5 stars ( 147 )

$59.99

—

$85.99

Mahle Original Premium Piston Ring Sets

Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.

4.82 out of 5 stars ( 56 )

$62.99

—

$130.99

ICON FHR Series Piston and Ring Kits for GM LS

ICON FHR Series piston and ring sets for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. Completing these kits are file-fit ring sets that allow custom ring gaps for your specific application, and they are built to handle the abuse of stock street or forced induction to nitrous applications. ICON FHR Series pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ringland. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating

5.0 out of 5 stars ( 1 )

$577.28

—

$596.53

Scat Pro Comp I-Beam Connecting Rods

These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.

4.75 out of 5 stars ( 63 )

$579.99

Mahle PowerPak Piston Kits

Mahle PowerPak Piston Kits and ring kits include forged pistons with steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines.

Not Yet Reviewed

$978.25

ICON FHR Series Pistons for GM LS

ICON FHR Series pistons for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. ICON FHR pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ring land. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating

5.0 out of 5 stars ( 6 )

$535.35

Manley Platinum Series Pistons

Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.

4.33 out of 5 stars ( 6 )

$106.90

—

$855.19

Diamond Pistons Competition Series Pistons

Diamond Pistons Competition Series pistons are for those looking to take their engine to a whole new level of power. These forged aluminum pistons are superior in strength and provide extra protection during the high-stresses of high-compression, forced induction, or nitrous. Diamond Pistons Competition Series features: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)

5.0 out of 5 stars ( 1 )

$78.00

—

$917.97

SRP Professional Series 2618 Alloy Forged Pistons

JE Pistons SRP Pro 2618 line expands on the premium features of the SRP Pro Series with the addition of extremely strong, forged aluminum material. All piston kits include gas-nitrided, carbon-steel pistons rings, pins, and locks. SRP Pro 2618 pistons maximize piston strength and value, whether you're building a rowdy small block or a flame-spitting big block. Offered in a wide variety of engine applications in popular bore and stroke dimensions, select the ideal fit for your build. Features: * Forged using 2618 aluminum, yielding high-tensile strength needed for high-demand performance applications * Advanced Forged Side Relief (FSR) forging design increase strength * Ring groove design placement proven to maintain positive seal in high-horsepower, boosted/nitrous applications, along with stout top land thickness for improved strength * High performance, low-friction skirt coating reduces wear and reduces operating noise while optimizing performance * High-quality narrow wrist pins that reduce weight, locks, and JE Pro Seal premium piston rings are included * Ring set: -- 1.2mm premium steel top ring -- 1.5mm Napier (hooked face) second ring -- 3.0mm standard tension oil ring * Accumulator grooves help reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power

Not Yet Reviewed

$199.99

—

$874.99

Mahle PowerPak Pistons

Mahle PowerPak pistons are forged pistons with steel pins and wire locks. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. Part numbers with T on the end have a cutting edge ceramic-based thermic barrier. The barrier is resistant to thermal shock, insulates the piston crown, and reduces heat transfer to increase performance. These replacement pistons are available in a wide variety of size options for fitment with specific engines and pistons.

3.0 out of 5 stars ( 2 )

$86.09

JE Pistons LS Series 15-Degree Dome Pistons

One of the best forged pistons for your high performance LS engine, JE Pistons 15-degree domed pistons. They feature JE's FSR (forged side relief) engineered for today's high-power normally aspirated and forced induction LS engines. The exclusive asymmetrical skirt maintains a larger skirt area on the heavily stressed major thrust side, while reducing friction with a smaller skirt on the minor thrust side. The result is high-strength, lightweight pistons that outperform the competition. Select the LS Series pistons needed for your performance setup. Features: * Designed with 15-degree valve pockets * Accumulator grooves * Double pin oilers * Offset wrist pin * Includes round wire locks * Designed for 1.2/1.5/3mm and 1.5/1.5/3mm rings

Not Yet Reviewed

$199.99