Availability
Showing In Stock Items. Show All 48 Items.
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 68 )
$93.99
—
$649.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great 2618 forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$937.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$32.99
—
$255.99
ICON FHR Series pistons for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. ICON FHR pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ring land. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 5 )
$420.99
—
$569.99
ICON FHR Series piston and ring sets for GM LS offer premium, custom options in an "off the shelf" option for your LS-family engine. FHR (Formed Head Relief) pistons have valve reliefs that are formed in as the piston blank is pressed into the die, creating a stock, but light forging. Many of the domed models are solid which allows tailoring the dome height for a specific compression ratio. They are constructed from high-strength, forged 4032 aluminum alloy for increased durability while maintaining tighter piston-to-wall clearance for increased cylinder sealing, lower cylinder wear, and stock-like noise levels, making them ideal for street and lightly boosted applications. Completing these kits are file-fit ring sets that allow custom ring gaps for your specific application, and they are built to handle the abuse of stock street or forced induction to nitrous applications. ICON FHR Series pistons for GM LS also feature: * Mini grooves allow an overheated piston that contacts a cylinder wall to transfer heat to the wall. Friction is also reduced over a solid ringland. * Accumulator grooves provide a reservoir area for gases that pass by the top ring. Pressure is reduced between top and second ring to help stabilize flutter and maximize ring seal. * 0.030 in. offset wrist pins * Round wire locks * M42 skirt coating
( 1 )
$490.99
—
$517.99
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$774.95
—
$1,574.95
JE Pistons sport compact pistons are specifically engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength 2618 aluminum alloy. Their dome/dish requires no deburring or preparation and features smooth-flowing radii for excellent flame travel. A pin fitting, wire locks, and rings are included.
Not Yet Reviewed
$49.50
—
$1,524.99
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$804.95
—
$1,604.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series piston and ring kits increase your horsepower potential without killing the budget. Forged and machined with your choice of premium aircraft quality 4032 or 2618 alloy, these kits are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$754.95
—
$1,604.95
Total Seal TS1 gapless 2nd street and race piston ring sets are the preferred choice for race engine builders. These ring sets start with a ductile iron top ring, and feature gapless 2nd rings, and 3-piece standard-tension oil rings. The TS1 gapless 2nd street and race piston ring sets are designed for use in all applications, including mild nitrous, boost, turbo, and forced induction applications. From extreme horsepower race engines to powerful stationary engines for industrial use and everything in between, Total Seal can help you to improve the efficiency and durability of your performance engine.
Not Yet Reviewed
$59.83
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? DSS FX Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous, or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power and longevity. Kit includes a DSS XP piston ring set featuring gas nitrided steel top rings, Napier second rings, and flex vent oil rings. FX Series pistons feature the patented X Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
Not Yet Reviewed
$1,054.95
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$599.95
—
$1,379.95
D.S.S. Competition Engine offers E Series forged piston and ring kits for a variety of applications, including many Chevy and Ford V8 small block engines from 1963 and up—an ideal choice for a budget performance engine build. Forged and machined from premium wear-resistant 4032 alloy, these pistons are the low-cost alternative to cast hypereutectic pistons. They're loaded with features, such as: fully CNC-machined piston tops; forged in oil drain backs; diamond turned skirts; full floating or press-fit heavy-duty wrist pins; double true arc pin retaining locks; and more. Available with flat top or dish style pistons, in a wide range of size and stroke options, the kits are sold in sets of 8. Additional details: * Ring set included * Fully machined piston crown * Lightweight design * Precision-honed pin bores * Forged side reliefs * Boost and NOS ready (mild levels)
( 2 )
$479.95
—
$509.95
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,054.95
—
$1,874.95
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$85.00
—
$1,687.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series pistons increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy with horizontal gas porting, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * XR Extreme duty wrist pins * Deep CNC valve reliefs * Horizontal gas porting
( 2 )
$819.95
—
$1,619.95
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$629.95
—
$1,409.95
For high-rpm, forced induction, and nitrous applications, JE Pistons offers the Series TS Trend wrist pins with a straight wall. These pins are constructed from premium H13 steel as the perfect upgrade when you decide to go the boosted route with your build. All JE pistons are super-finished on both the outside and inside diameters to help reduce piston pin bore wear and minimize fatigue cracking, adding to their overall strength and reliability. JE Pistons Series TS wrist pins are available in a variety of lengths, diameters, and wall thicknesses to match your needs.
Not Yet Reviewed
$36.99
—
$45.99
It has long been recognized that thin rings make more horsepower due to a reduction in friction and better ring sealing, and many piston manufacturers offer standard, thinner ring grooves for this reason. Unfortunately, the choices for thinner ring packages are expensive and often made of inferior materials. Total Seal TFX piston rings utilize proprietary ring manufacturing processes, high-quality 440B stainless and 9000 Series steel, and Total Seal's proprietary C56 face coating. The result--a high horsepower and torque per dollar ratio, with decreased wear and oil consumption (when coupled with a properly honed cylinder bore). Total Seal TFX ring sets come in two ring thickness packages covering most domestic and import applications. Select the proper bore size and groove dimension needed for your application. Total Seal TFX ring features: * Well suited for normally aspirated, boosted, or nitrous applications * Available in all popular bore sizes * 440B stainless steel top ring with proprietary C56 face coating * Steel, Napier profile 2nd ring * Standard tension oil control rings
Not Yet Reviewed
$189.95
Total Seal Maxseal gapless top piston ring sets are designed to cut blowby to negligible levels via their gapless ring technology that utilizes a narrow rail to bridge the normal end gap, sealing off the path blowby otherwise would take. Featuring a Maxseal gapless top ring, Napier 2nd ring, and standard-tension oil ring, Total Seal sets are ideal for use in all applications, including mild nitrous, boost, turbo, and forced induction applications. Order the piston ring set to fit your application.
( 1 )
$66.81
—
$381.57
Diamond Pistons Big Block 24/26 Degree Street/Strip Flat Top Series pistons are available for a variety of applications, including many Chevrolet V-8 engines from 1965-90. Forged from aluminum with single valve relief, these flat top-style pistons are offered in different bore, stroke, and rod length sizes—along with several other options. Order individually or in a set of 8. Additional details: * 1,200 hp rated * Forced pin oilers from the oil ring * Pin fitted * 3-D pockets * Designed for mild boost applications * Pins, locks and support rails (if required) included
Not Yet Reviewed
$136.00
—
$1,542.99
Diamond Pistons Toyota 2JZGTE Series pistons are ideal for either the street or the drag strip. These 2618 aluminum pistons are significantly lighter than the factory pistons and superior in strength, allowing your engine to handle that extra horsepower. The 2618 alloy is excellent for boosted engines such as the Toyota 2JZGTE, especially when increasing boost. Diamond Pistons Toyota 2JZGTE Series piston feature: * 3-D milling on piston crowns for "ready to install" finish * Offset pins for quiet operation * Side gas ports for better ring seal * Ratios figured for 87mm x 0.040 in. head gasket * Moly skirt coating for friction-loss and skirt-wear protection * Top ring down dimension 0.300 in. 1.338cd to 0.280 in. 1.180cd * Ratios figured for 0.040 in. head gasket at 8.937 in. deck height. * Premium 1.0mm x 1.2mm x 2.8mm ring package included * Over-sized valve pockets for "larger than stock" valve sizes * Valve pocket depth 0.245 in. intake and 0.230 in. exhaust
Not Yet Reviewed
$1,114.98
Total Seal's AP steel gapless 2nd piston ring sets feature their Advanced Profiling (AP) 440B stainless steel top ring with C33 chromium nitride face coating that doesn't allow dirt to penetrate. It is combined with a cast gapless 2nd ring, and a low, standard, or high-tension oil ring. The sets work in all applications including extreme nitrous, boost, turbo, and forced induction. With Advanced Profiling rings, you get the same horsepower producing piston ring technology that Total Seal delivers to the top builders in Cup, IRL, NHRA, IHRA and Formula 1. Order the ring set for your application.
Not Yet Reviewed
$78.59
—
$530.57
Total Seal AP Steel street and race piston ring sets are a preferred choice for race engine builders. They work well in all applications, including extreme nitrous, boost, turbo, and forced induction applications. Each set starts with Total Seal's Advanced Profiling (AP) 440B stainless steel top ring with C33 chromium nitride face coating that doesn't allow dirt to penetrate. The 2nd ring is Napier-style ductile iron and the sets are finished with a low, standard, or high-tension oil ring. For increased performance and longer life, choose Total Seal's AP Steel conventional piston ring sets with the specs needed for your application.
( 1 )
$58.37
—
$375.68
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
