Availability
Showing In Stock Items. Show All 113 Items.
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 70 )
$98.99
—
$649.99
Summit Racing™ Pro LS wrist pins are the toughest on the market—powerfully built for extreme boost and nitrous. They're specifically developed for Summit Racing™ Pro LS pistons and others that use a 2.250 in. pin length for Spiralocks to clear the reluctor ring without notching. Make no mistake, during high-contact stress and impact loading applications, you'll want the confidence that Summit Racing™ Pro LS wrist pins provide! * Part number SUM-S719 is made from H-13 tool steel, an alloy with 289,000 psi tensile strength (vs. common 9310 alloy tool steel pins at 187,000 psi) * Part number SUM-S720 adds diamond-like coating (DLC) to the H-13 tool steel for increased durability, hardness and much lower friction * The DLC wrist pins (SUM-S720) provide better lubricity for use with low-silicon 2618 alloy pistons that may have pin-bore galling issues at the extremes without DLC * H-13 tempers at 1,000 degrees F and readily accepts DLC application (at 400 F) without structural changes * Rockwell hardness: 54 HRC * Increased ductility of 30,500 ksi compared to other materials * Surface-finished to an RA of less than 1 and a concentricity of .000040 in. * 0.215 in. wall-thickness—the thickest on the market for ultimate strength * Only 135 grams * I.D. honed to remove stress-risers
( 4 )
$32.99
—
$255.99
Diamond Pistons Race Series pistons will withstand some serious horsepower for your high performance engine. These 2618 aluminum pistons are not only significantly lighter than the factory pistons but also superior in strength. The 2618 alloy is specifically for high-horsepower, nitrous, and boosted engines making up to 2,000 hp. Diamond Pistons Race Series pistons feature: * 3D milling on piston crowns for "ready to install" finish * Inside design forging with fully machined underskirts for maximum strength * Valve pockets designed to work with most aftermarket cylinder heads * Side gas ports for better ring seal * Moly skirt coating for friction-loss and skirt-wear protection * Premium H-13 wrist pins included; chamfered for round wire locks
( 1 )
$1,279.94
Diamond Pistons Competition Series pistons are for those looking to take their engine to a whole new level of power. These forged aluminum pistons are superior in strength and provide extra protection during the high-stresses of high-compression, forced induction, or nitrous. Diamond Pistons Competition Series features: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)
( 1 )
$78.00
—
$1,087.97
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 22 )
$749.50
—
$1,014.97
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 5 )
$1,043.58
Whether it's a car, truck, motorcycle, marine, or performance racing application—properly sealing the piston to the engine block is a requirement. Hastings premium ductile ring sets do just that, and they're offered in many different options to fit virtually any piston. If the engine you're working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. These premium ductile piston ring sets are great for rebuilds or new builds, daily drivers or performance vehicles. Order the sizes needed for your project.
( 139 )
$29.99
—
$208.99
Whether it's a car, truck, motorcycle, marine, or performance racing—properly sealing the piston to the engine block is a requirement. Hastings Piston ring sets do just that, while being offered in many different options to fit virtually any piston out there. If the engine your working on is blowing smoke, using excessive oil, or at a loss for power, it may be time for new rings. Hasting piston ring sets are great for rebuilds or new builds. Hastings has been manufacturing piston rings since 1915 and they have not spent a second developing anything but piston rings. Trust the professionals at Hastings and use them on your next job.
( 118 )
$87.99
—
$211.99
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$897.95
—
$967.95
D.S.S. Competition Engine offers FX-Series forged 4032 aluminum alloy piston and ring kits for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include corresponding piston rings for a turnkey installation. FX-Series forged 4032 alloy pistons increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft-quality 4032 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 4 )
$867.95
—
$937.95
Manley Platinum Series pistons are designed to provide trouble-free installation, excellent reliability, and maximum horsepower for your application. Available in 2618 and 4032 forgings, they provide the optimum balance between strength and weight, with no grain-interrupting internal milling. The Platinum Series pistons' 2618 alloy offers maximum high-temperature strength and fatigue resistance, while the 4032 alloy is ideal for moderate-horsepower street applications. Order the style and size pistons designed for your vehicle and engine.
( 6 )
$108.35
—
$866.78
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for European, import, and sport compact applications. Engineered, forged and machined, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. JE Pistons sport compact/European pistons are engineered for extreme applications, up to and including professional competition. In this environment, the higher compression ratios, highest boost, or heavy nitrous usage necessitate the higher tensile strength of 2618 aluminum alloy. Their domed or dished tops require no deburring or preparation and feature smooth-flowing radii for excellent flame travel. High-quality wrist pins, locks, and JE Pro Seal premium piston rings are included. JE Pistons' performance has been proven in victory lane time and time again. Available individually and in sets, equip your engine with the best in forged pistons. Features: * Designed specifically for each engine and use application to provide optimized performance durability * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
Not Yet Reviewed
$299.99
—
$1,349.99
Mahle Original aftermarket replacement pistons have great features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Some include hard anodized ring lands, and coatings on the skirts and crowns. Choose the model designed for your vehicle and engine application.
( 2 )
$523.99
—
$694.99
ICON Premium forged pistons are designed to be application specific and are made from either 4032 or 2618 aluminum. Those featuring 2618 aluminum have a lower silicon content and are better suited for engine combinations with high compression or a power adder. They also offer an increased rate of thermal expansion. These kits include all the features of an FHR piston, with the addition of anodized top ring grooves and crowns, precision CNC-machined valve reliefs and crown features, pressure-fed pin bore oiling, and skirt and pin boss struts for increased strength and durability. Refresh or upgrade your engine with an assist from the ICON Premium forged anodized piston and ring kit best suited for your application. Additional features, items, and specifications include: * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons
Not Yet Reviewed
$519.99
—
$761.99
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$43.99
—
$860.99
D.S.S. E Series forged pistons are fully forged and machined from a 4032 alloy material with precision-honed piston pin bores and include heavy-duty piston pins. The pistons are full-floating or press-fit compatible and use double true arc pin locks, forged oil drainbacks, double valve notches, and diamond turned piston skirts. Get high-quality pistons at a great price--try a set of D.S.S. E Series forged pistons today!
( 59 )
$469.95
Wiseco Professional Series pistons are designed to take the hard-driving abuse from your performance engine. They're forged from either 2168 or 4032 aluminum alloy for maximum strength, and then precision CNC-machined to their intricate final configurations under close tolerances. Where applicable, designs incorporate strength provisions to deal with turbocharging, supercharging, and nitrous. Chromoly wrist pins and Spirolox retainers are included. Choose the model tailored for your engine application.
( 9 )
$150.99
—
$1,125.99
Dualoy cast pistons are designed for diesel and medium-duty gas engines. They're cast from aluminum and machined in-house to maintain the highest level of quality and consistency. The diesel applications feature an iron ring insert in the top ring groove designed to accept the Keystone-style top ring. Dualoy piston sets are available for most popular diesel light or medium-duty truck applications and engine codes.
Not Yet Reviewed
$403.99
—
$538.99
D.S.S. Competition Engine offers FX-Series forged 2618 aluminum alloy piston and ring kits with XR wrist pins for a wide range of Chevy engine applications from the 1960s and up. The pistons are available in flat top, dish, and dome styles—in countless size and performance options. For your convenience, these sets include piston rings and XR wrist pins for a turnkey installation. FX-Series forged 2618 alloy pistons will increase your horsepower potential without breaking the budget. Forged and machined with premium aircraft quality 2618 alloy, the pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Order the set recommended for your year/make and engine application.
( 2 )
$1,087.95
—
$1,147.95
Wiseco Racers Choice 2-Stroke Powersports piston furnish the highest quality forged aluminum pistons for dirt bikes, ATVs, snowmobiles, outboard marine, and motorcycles. Their cutting-edge designs coax maximum performance: increased power and instantaneous response! Many kits include top end rings, pins, and gaskets to make it simple for racers and engine builders to complete the necessary upgrades. As with all engine components, locate the Wiseco piston model that's a compatible fit with your vehicle.
Not Yet Reviewed
$143.97
—
$233.97
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$531.99
—
$1,109.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$689.95
—
$739.95
Mahle Original piston ring sets are designed to be installer-friendly. They are pre-lapped to seat immediately, virtually eliminating break-in time. Ring materials and coatings, as well as ring tension, are all optimized for reduced friction and extended life in each application. The compression rings feature a barrel-faced contact area for more efficient compression and CNC-controlled gap chamfer to optimize compression and reduce blow-by. Intermediate rings have a reverse twist design for better groove side sealing, and taper race machining to enhance contact. The CP-20 oil ring assemblies feature a 20 degree ear angle, an exclusive feature that provides the best possible side seal against the cylinder wall, and a special chemical polish on the oil ring expander offers enhanced oil drain back. Mahle Original piston ring sets provide unmatched quality and ease of installation, making them the rings of choice for today's engine builders.
( 54 )
$91.99
—
$322.99
Wiseco piston retaining clips are important hardware components for a wide variety of powersports equipment, including ATVs, UTVs, street and off-road bikes, snowmobiles, and personal watercraft. The steel circular wrist pins are designed to permit rotation within the piston, but prevent lateral movement. They're available in a variety of diameters and thicknesses to fit your specific application.
( 5 )
$2.99
—
$4.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
