Availability
Showing In Stock Items. Show All 60 Items.
The Summit Racing Pro LS forged pistons are affordable and built to withstand the rigors of high boost and nitrous. These pistons are forged from Premium 2618 alloy - the strongest made. They have specially profiled piston skirts, which allow them to run a tight piston-to wall-clearance for maximum ring seal and minimal friction. They have many other high-tech features too! • Maximum ring-land thickness for power-adders • Dedicated forgings for the best strength-to-weight ratio • Multiple compression ratios specifically targeted for 4.8L, 5.3L, 5.7L, and 6.0L engines • Designed around Premium file fit rings with Gas-Nitride or Plasma steel tops and ductile Napier second rings • Available in versions for Gen. 3 Press-fit, Gen. 4 Floating, and Aftermarket 6.125 rods • Standard and Stroker versions available • Generous valve reliefs that work with both Cathedral port AND Rectangle port heads • Pressure-fed pin-oiling • Pressure seal groove in 2nd ring land for increased seal. • High-Speed brush deburring to remove sharp edges that cause detonation • Ultra-Modern 2.250 pin forgings clear the reluctor rings with stroker cranks • Durable Chromium Steel wristpins. • Replacement Singles Available
( 70 )
$649.99
Summit Racing™ Forged Pro Pistons brings modern engine piston technology to older engine platforms at the great value. Why use an antiquated piston designed fifty years ago in your new build? A great piston starts with a great forging. Forged Pro piston forgings are stronger AND lighter. This makes more power AND takes stress off the crank, rods and block at higher rpm. It also saves money balancing a crank when heavy metal is not required. Forged Pro pistons are designed around ultra-modern Nitride Steel top ring packs and Summit GP Gas Ported variants. Less friction results in more power and less bore wear. Superior machining results in less blowby for less oil consumption and longer life is the result. Better rings are great horsepower per dollar! Most old production engines were designed to run on 87 octane in heavy vehicles. If you're building a performance engine, chances are you're running it on 91+ octane and you might as well add a little pop. Forged Pro pistons yield an extra 1/2 point of compression in most instances. This is free power from idle on up for the life of the engine! Forged Pro pistons have extra thick ring lands for moderate boost and nitrous. Special care has been taken to deburr critical areas for more strength and less chance of detonation. Special skirt profiles are designed to run at tighter clearances than other forged pistons for less piston rock. This helps them make more power, run quieter and last longer than other forged pistons. Make your build run with the best of them!
( 6 )
$617.99
—
$655.99
Are you looking for affordable high performance for your street machine? Wiseco Pro Tru Street pistons are right up your alley! These forged 4032 aluminum pistons are complete with chromium alloy steel piston pins and Spirolox. Oversized, symmetrical, radiused valve pockets allow for maximum flow around the valves during overlap—and accommodate oversized valves and high-lift cams. Wiseco's proprietary ArmorGlide skirt coating extends piston life, increases horsepower, reduces noise, and offers much tighter dimensional tolerances than typical spray-on coatings. Choose the set designed for your vehicle and engine application. World-class, precision-machined high performance pistons—that's Wiseco value!
( 45 )
$629.99
—
$680.99
KB Performance Hyper piston and ring kits are offered for a wide range of applications from street and towing to marine and race. The kits feature pistons cast from 390 hypereutectic alloy heat-treated to T-6 standards to make them stronger. The pistons also feature fully machined crowns and valve pockets. KB hypereutectic pistons come in several head designs, as well as standard and oversized bore sizes. All KB Hyper pistons are lightweight to improve throttle response and rpm changes, while still being strong enough to withstand high compression and high temperatures. KB Performance Hyper kits (KT) are completed with piston ring sets containing top rings of moly-coated cast iron (M) or ductile iron (D).
( 71 )
$502.99
—
$682.99
Mahle PowerPak piston and ring kits include forged pistons, low-drag rings, steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines and pistons.
( 22 )
$576.24
—
$864.04
ICON Pistons FHR (Forged Head Relief) Serie features VMS 75 alloy, true arc-style lock rings, broached pin holes, and breakthrough oil returns—all designed to be easy on your wallet! In addition, most flat-top, dish, and dome styles are available in an offset pin design, which will help to quiet those street motors. Sets with KTM after the product number will include piston rings. ICON FHR Series pistons are offered for a wide variety of specific make/model and engine applications.
( 11 )
$529.99
—
$806.99
ICON pistons have introduced a new forging line: the FHR (Forged Head Relief) Series. This new line features VMS 75 alloy, true arc-style lock rings, broached pinholes, breakthrough oil returns, and 5/64 in. ring packs—all designed to be easy on your wallet! In addition, most flat-top and dish applications are available in an offset pin design, which will help to quiet those street motors. The included piston rings will seal mild to high-compression engines, help to protect against oil blowby, and feature standard ring end gap for an easy installation.
( 4 )
$522.99
—
$668.99
What kind of power are you packing? Mahle PowerPak Plus piston and ring kits possess the attributes that you seek for the competitive edge that you want. Built from forged aluminum, these PowerPak pistons are hand-deburred and phosphate coated and then given Mahle's proprietary Grafal anti-friction coating. The lightweight kits also include low-drag slipper skirts, CNC-machined pin bores, machined ultra-flat ring grooves, and Mahle low-drag rings. These power-packed, race-proven packages provide you with unmatched consistency and performance. What separates you from the competition? It's the fact that you've chosen the power of Mahle PowerPak Plus piston and ring kits.
( 5 )
$650.66
—
$864.04
These Scat I-beam connecting rods incorporate all of the best features possible for an I-beam rod, including some strength adders found in H-beam designs. Scat Pro Comp I-beam connecting rods are profiled with clearance for long stroke applications. These connecting rods feature a one-rib cap design for added strength and bearing support, polished beams to eliminate stress risers, and special hollow dowels with huge 7/16 in. ARP cap screw bolts to greatly increase strength and horsepower capabilities.
( 61 )
$544.99
Manley Street Master pistons are made of high quality forged aluminum and provide you with a perfect blend of economy and high performance power. They mimic your OEM design with a 1.22mm offset wrist pin location for smooth and quiet start-ups. They have a perfect ring groove to skirt squareness, pressure balanced grooves, a full banded skirt designed for increased skirt stability, and include 2.5 in. premium chrome moly pins with round wire locks. If you're looking for highly durable and dependable pistons, Manley Street Master pistons are your answer.
( 1 )
$614.59
Mahle PowerPak Piston Kits and ring kits include forged pistons with steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines.
Not Yet Reviewed
$589.52
—
$835.97
D.S.S. Racing SX-Series forged pistons and rings are the perfect find in your hunt for horsepower! Why? They're high-quality, lighter than stock, and value-priced! D.S.S. SX forged piston and ring kits offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons and rings are more than capable of getting your engine blower, turbo, and nitrous ready! Kit includes a DSS DM piston ring set featuring ductile moly steel top rings and flex vent oil rings. Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons and rings.
( 4 )
$714.95
—
$754.95
You don't need a king's ransom to rule the track, thanks to ICON premium forged piston and ring kits. They deliver high-performance racing pistons crafted from high-strength, primary aluminum alloys and matching performance piston rings. The pistons feature fully machined heads and valve ports, advanced accumulator and mini groove technology, drilled pin holes, triple-wound spiral lock rings, and their proprietary diamond-finished skirts. ICON premium forged pistons can handle the pressure and abuse from the horsepower numbers that your engine produces. If you're ready to give up your kingdom to build more horsepower with a great set of pistons--think again! The ICON premium forged pistons and ring kit best suited for your application will help you reign victorious without spending a lot of cash.
( 18 )
$538.50
—
$876.99
Clearance
Mahle Original replacement pistons have the same great OE features to provide the perfect fit and function in your vehicle. They offer things like compensated ring grooves to ensure proper ring loading and oil control; as well as expansion-controlled designs for small fitting clearances—to reduce engine noise, wear, emissions, and improved oil control. Choose the model designed for your vehicle and engine application.
( 7 )
$505.99
—
$679.99
Pushing the envelope on your engine combination? Need parts that will stand up to the demands of today's power levels? D.S.S. FX-Series forged 4032 alloy pistons increase your horsepower potential without busting the budget. Forged and machined with premium aircraft quality 4032 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. D.S.S. FX-Series pistons feature a patented X-Groove skirt design, which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application needs. Features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High strength piston wrist pins * Deep CNC valve reliefs
( 9 )
$599.95
—
$719.95
D.S.S. Racing SX-Series forged pistons are the perfect find in your hunt for horsepower! Why? They're American-made, high-quality, lighter than stock, and value-priced! D.S.S. SX forged pistons offer value-minded racers the high performance build they want on a budget. They provide high-caliber features like premium aluminum alloy, forced pin oiling, drilled return holes, a turned dish design, and CNC diamond turned skirts that you will not normally have in pistons of this price. These SX forged pistons are more than capable of getting your engine blower, turbo, and nitrous ready! Your quest for horsepower includes quality and value--choose D.S.S. Racing SX-Series forged pistons.
( 8 )
$559.95
—
$599.95
ICON premium forged pistons are made from high-strength, heat-treated aluminum alloy. They feature a diamond-machined skirt, head, mini-grooves, pin bore, gas accumulator, ring grooves, and pressure-drilled pin hole oiling. The pistons have a V-rib design for light weight, strength, and maximum piston cooling. Compare weight, performance, design, and cost—and you will win with ICON!
( 43 )
$516.99
—
$912.99
D.S.S. Competition Engine offers E Series forged piston and ring kits for a variety of applications, including many Chevy and Ford V8 small block engines from 1963 and up—an ideal choice for a budget performance engine build. Forged and machined from premium wear-resistant 4032 alloy, these pistons are the low-cost alternative to cast hypereutectic pistons. They're loaded with features, such as: fully CNC-machined piston tops; forged in oil drain backs; diamond turned skirts; full floating or press-fit heavy-duty wrist pins; double true arc pin retaining locks; and more. Available with flat top or dish style pistons, in a wide range of size and stroke options, the kits are sold in sets of 8. Additional details: * Ring set included * Fully machined piston crown * Lightweight design * Precision-honed pin bores * Forged side reliefs * Boost and NOS ready (mild levels)
( 2 )
$509.95
If you're pushing the envelope on your engine combination or need parts that will stand up to the demands of today's power levels, D.S.S. FX-Series forged 2618 alloy pistons will increase your horsepower potential without killing the budget. Forged and machined with premium aircraft quality 2618 alloy, these pistons are a great choice for naturally aspirated, nitrous or boosted engines with the added strength from the internal gussets. Additional CNC milling removes material in non-critical areas to achieve a lighter weight for the perfect balance of strength, power, and longevity. The FX-Series pistons feature the patented X-Groove skirt design which reduces damage caused by fuel wash down and break-in debris for superior skirt, cylinder, and ring life. For stroker engines, the advanced skirt design improves piston stability and ring seal which provides quieter operation. Select the pistons for your application. Key features include: * Forced pin oiling * Drilled bottom land intersecting oil groove drain backs * Pin lock ring removal slot * Precision honed piston pin bores * High-strength piston wrist pins * Deep CNC valve reliefs
( 5 )
$629.95
—
$749.95
ICON Premium forged pistons are designed to be application specific and are made from either 4032 or 2618 aluminum. 2618 aluminum has a lower silicon content and is better suited for engine combinations with high compression or a power adder, they also offer an increased rate of thermal expansion. ICON Premium forged anodized piston and ring kits include all the features of an FHR piston, with the addition of an anodized top ring groove and crown, precision CNC-machined valve reliefs and crown features, pressure fed pin bore oiling, and skirt and pin boss struts for increased strength and durability. ICON Premium forged piston and ring kits include pistons and ring stack. Select the kit designed for your build. Additional features: * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons
Not Yet Reviewed
$504.99
—
$803.99
Mahle Wissota PowerPak Plus piston and ring kits are power-packed packages for dirt track racers. They're hand-deburred, forged aluminum pistons fully machined and feature a phosphate dry lubricant coating. The lightweight slipper skirt forgings are given Mahle's Grafal anti-friction coating to reduce drag. PowerPak Plus kits also feature CNC-finished pin bores, high-strength steel pins, race-proven round wire locks, and include their low-drag ring pack. Fit your high-rpm dirt track race car with low-drag pistons and rings made especially for your year/make and engine application.
( 1 )
$762.16
RaceTec's AutoTec line of forged pistons offers high-quality, precision manufactured options at competitive pricing. The primary material used for AutoTec pistons is 4032 high-silicone aluminum alloy which is extremely durable, has great wear resistance, a low expansion rate, and is very low in friction. The most common applications for AutoTec pistons include muscle car restorations, performance street rods, as well as many spec racing classes. They can also withstand mild nitrous kits, small turbos, or superchargers. A large selection of sizes and styles is available. Choose the proper fit for your application build. Additional features for most pistons in the AutoTec line: * CNC Precision machined ring grooves * Top ring land gas distribution groove to enhance performance and improve ring seal * Wrist pins, pin fitting, wire locks, broached pin oilers, and accumulator groove are included * Diamond turned skirts
( 1 )
$689.00
—
$766.00
KB Performance hypereutectic pistons are made from 390 aluminum alloy and heat-treated to T6 standards, which makes them 30 percent stronger than ordinary untreated hypereutectics. Their 100 percent CNC-machined crowns, high upper compression-ring location, gas-accumulator groove, drilled oil returns, and spiral-lock retainer grooves make these pistons outstanding for performance applications. They have a lightweight, rigid-rib skirt design that stabilizes the piston in the bore. All of this adds up to pistons that fit tighter than forged types, provide improved oil control, reduce blow-by, increase ring life, eliminate cold start-up knocking, and won't cost you an arm and a leg! Thousands of models are available—find the set and options designed for your vehicle and engine application.
( 137 )
$522.99
—
$556.99
ICON Premium forged pistons are designed to be application specific and are made from either 4032 or 2618 aluminum. 2618 aluminum has a lower silicon content and is better suited for engine combinations with high compression or a power adder. A byproduct of having a lower silicon content is an increased rate of thermal expansion. Because of this, pistons made from 2618 require more piston-to-cylinder wall clearance than their 4032 counterparts. ICON Premium forged anodized pistons include all the features of an FHR piston, with the addition of an anodized top ring groove and crown, precision CNC-machined valve reliefs and crown features, pressure fed pin bore oiling, and skirt and pin boss struts for increased strength and durability. ICON Premium pistons are built in a variety of compression ratios and are available for a wide range of engine types. Select the ones designed for your vehicle. Additional features: * Mini grooves * CNC-machined valve reliefs and crown * Diamond CNC-turned skirts * Accumulator groove * Dual forced pin oiling * Lateral gas ports on high-compression designs * Spacer rings provided for shorter compression height pistons
Not Yet Reviewed
$666.99
—
$874.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
