Availability
Showing In Stock Items. Show All 28 Items.
Howards Cams ProMax 2618 race pistons are low-silicon and stronger pistons that you need for racing! Forged from 2618 billet bar stock and then heat-treated and aged to a T61 condition, ProMax race pistons have less than one percent silicon content to stand up to the most extreme racing stress. Plus, Howard Cams' X-beam forging design produces a stronger piston than most standard pistons for the ultimate in performance. These 2618 race pistons also have the ability to keep their shape under extreme pressure and high rpm with no skirt shrinking! CNC-turned skirts, oversized valve pockets with radius valve reliefs, forced pin oilers, accumulator grooves, double Spirolox, and lock removal indents are standard features. Lightweight, heat-treated, aircraft-quality wrist pins are also included. Pump up the power of your race engine with the serious strength of American-made ProMax 2618 race pistons from Howards Cams.
Not Yet Reviewed
$879.99
—
$922.99
JE Pistons big block nitrous series dome top pistons have ring lands designed for nitrous applications. Valve reliefs are designed to accept oversized valves and long-duration, wide-lobe separation camshafts, and they are also compatible with angle milled heads. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. They fit open chamber cylinder heads.
Not Yet Reviewed
$1,024.99
—
$1,099.99
JE Pistons Tour series gas ported pistons have undergone engineering changes to handle higher horsepower 4-barrel applications (approximately 650 hp) and angle-milled heads. Both the 350 and 400 Series accept oversize valves (the intake pocket is 2.255 in. and the exhaust pocket is 1.870 in.) and long-duration, tight lobe separation cams. Ring grooves are precision-machined for .043, .043, 3.0mm backcut rings with lateral gas ports for a superior ring seal.
Not Yet Reviewed
$1,024.99
JE Pistons 350/400 18 degree flat top pistons are compatible with angle milled heads and feature a race-proven, low-friction skirt design. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC-machined grooves accept 1/16, 1/16, 3/16 rings. These pistons utilize dedicated left and right hand forgings.
Not Yet Reviewed
$1,024.99
JE Pistons 350/400 small block dome top pistons are high-compression pistons that are compatible with most aftermarket 23 degree heads and are ideal for drag race and Circle Track applications. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Precision CNC ring grooves are designed for 1/16, 1/16, 3/16 rings. However, these will not fit JE Pistons Pro Topline or Brodix cylinder heads.
( 1 )
$968.68
—
$1,024.99
These big block flat top pistons by JE Pistons are compatible with forced induction, nitrous, and angle-milled heads. Valve reliefs will accommodate oversized valves and long-duration, tight lobe separation cams. Their compression height is figured using a 9.780 in. block height with zero deck clearance. Precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings. These pistons will fit both open and closed chamber cylinder heads.
( 3 )
$1,024.99
JE Pistons 400 small block 18 degree dome pistons feature a new dome profile to match a wider variety of 18 degree heads. They're designed to fit your high-compression, high-horsepower, 17/18 degree dirt late model engine. They have smooth flowing domes for optimum flame travel and angle milled head compatibility. New valve reliefs will accommodate larger valves and long-duration, tight lobe separation cams. These pistons utilize dedicated left and right hand forgings and accept 1/16, 1/16, 3/16 rings.
Not Yet Reviewed
$974.99
—
$1,099.99
JE Pistons 460 flat top pistons are compatible with OEM and aftermarket standard valve location heads. They will accommodate oversized valves and long-duration, wide lobe separation cams. The precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings and compression height is figured for 10.300 block height. SVO C, E, and Boss aluminum heads will require custom piston applications.
Not Yet Reviewed
$949.99
The rings lands, crown, and bottom band of JE Pistons nitrous series dome top pistons are specifically designed for nitrous applications. The valve reliefs accommodate most oversized valves and long-duration, wide lobe separation cams. Their precision CNC-machined ring grooves accept 1/16, 1/16, 3/16 rings, and hardened nitrous series rings are also available. These pistons will not fit Pro Topline or Brodix 11X cylinder heads.
Not Yet Reviewed
$1,024.99
—
$1,099.99
Add race-proven Mahle PowerPak pistons to the bolt-on performance of your Twisted Wedge® cylinder heads for a winning combination of power for your Ford. Specifically designed PowerPak piston kits complement the unique chamber and valve angles of your Trick Flow® Twisted Wedge® Ford cylinder heads. These forged aluminum alloy piston kits feature lightweight slipper skirts, machined crowns, CNC-finished pin bores, low drag ultra-flat rings, German steel pins, and race-proven round wire locks. The pistons are deburred and coated with dry phosphate to protect against micro-welding in the ring grooves and pin galling during initial startup. Piston skirts are given Mahle's proprietary Grafal anti-friction coating for additional performance. With specific pocket location and depths to match your Trick Flow® heads, these assemblies enable the use of aggressive cams, allowing you to pull every last bit of horsepower from this high-powered pair. These PowerPaks are available for all of the most popular flat top and inverted dome applications. Give your Ford an edge to victory with Mahle Twisted Wedge® PowerPak piston kits.
Not Yet Reviewed
$762.16
—
$849.55
CP Pistons Honda B-Series piston and ring kits are as good as they come. Founded to service the needs of those with the desire to build engines of the highest quality and technology, CP Pistons uses proprietary tooling, dedicated cutters, and unique fixtures. Their state-of-the-art equipment produces superior pistons that will not compromise your expectations. The climate-controlled inspection department is the most advanced in the industry and is outfitted with computerized electronic equipment specifically designed for their needs. Each piston is engineered using sophisticated computer modeling for optimum designs, while their 5-axis machining capability enables them to create any piston for any application. Additional features: * Full radius dome designs * Specific X-designated part numbers incorporate an X-style forging for additional strength, durability, and weight reduction * Available in standard or oversized * Deep valve relief depth accommodates high-lift camshaft * Made for +1mm valve sizes * Custom skirt cam and barrel design * Accumulator grooves * High-strength aluminum forgings * High performance rings * Fully CNC-machined and balanced to +/-1 gram * Wrist pins included at no additional cost * Double pin oilers, force fed oil ring * Pick lock grooves for easy lock removal * Pin fitting included
Not Yet Reviewed
$885.15
JE Pistons Brodix -12 15 degree dome top pistons are designed to work with most of the new 15 degree chamber designs. The race-proven hollow dome forging by JE Pistons is the newest design for Sprint Car applications. These pistons have deep valve reliefs to accommodate oversized valves and long-duration, tight lobe separation cams. They accept 1/16, 1/16, 3/16 rings. These pistons utilize hollow dome dedicated left and right hand forgings.
Not Yet Reviewed
$1,099.99
Ross Racing pistons are forged from 2618-T61 aluminum alloy and come standard with many great features, including: * Forced piston-pin oilers * Double Spirolox pin retainers * Valve pockets engineered for oversized valves and modern high-lift cams * Fully CNC-machined skirts to deal with high heat and side loadings * Radiused domes (on most applications) * Balanced to +/- 2.5 grams * Aircraft-quality pins Hundreds of models are available, with bore, stroke, rod length, and piston style options to best suit your replacement or upgrade needs. Order the set compatible with your vehicle and engine application.
( 26 )
$789.99
RaceTec pistons are the highest quality, precision manufactured options available made from forged or billet 2618 aluminum alloy. Utilizing the latest in CAD software and modern CNC machining centers, it is extremely durable and perfect for your high-horsepower application. RaceTec's in-house design and dyno-proven forgings ensure the strongest and lightest piston for your requirements. They offer a long list of sizes and styles. Choose the proper fit for your build. Features for most RaceTec pistons: * CNC Precision used in every manufacturing operation * Valve pockets machined for oversized valves and high lift cams * Critically machined ring grooves * Top ring land gas distribution grooves to enhance performance and improve ring seal * Wrist pins, pin fit, wire locks, broached double pin oilers, and accumulator groove are included * Diamond tooling used throughout production, including ring grooves and skirts
Not Yet Reviewed
$1,053.00
Mahle PowerPak Piston Kits and ring kits include forged pistons with steel pins, and wire locks—all in one race-proven package. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. These replacement packages are available in a wide variety of size options for fitment with specific engines.
Not Yet Reviewed
$1,002.74
Mahle PowerPak pistons are forged pistons with steel pins and wire locks. The pistons are hand-deburred and then coated with dry phosphate to protect against ring micro-welding and pin galling during initial startup. For additional performance, Mahle added its proprietary Grafal anti-friction coating to the piston skirts. Part numbers with T on the end have a cutting edge ceramic-based thermic barrier. The barrier is resistant to thermal shock, insulates the piston crown, and reduces heat transfer to increase performance. These replacement pistons are available in a wide variety of size options for fitment with specific engines and pistons.
( 2 )
$984.50
—
$1,002.74
Eliminate the wait with Cylinder Works standard bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These cylinders look virtually identical to your OEM parts. Cylinder Works standard bore cylinder kits come in model-specific kits, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
( 2 )
$707.12
—
$1,065.85
Eliminate the wait with Cylinder Works big bore cylinder kits. They arrive ready to install, eliminating the hassle of sending out your cylinder for re-plating or boring, and they're competitively priced compared to typical re-plating costs. These Cylinder Works cylinders look virtually identical to your OEM parts and are conveniently available in "stealthy" big bore sizes. Cylinder Works big bore cylinder kits come in a variety of sizes, so choose the one that best fits your application. Features include: * Super-convenient--just purchase and install * Nickel silicon carbide plated for long life * Honed to exact size for easy piston installation * Complete with gaskets, cylinder, and piston kit * No machine work required
Not Yet Reviewed
$764.71
—
$875.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
