Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Oiling Systems - Oil Pans, Pumps & More
Turbosmart OPR V2 Oil Pressure Regulators
Turbosmart OPR V2 turbocharger oil pressure regulators provide rock solid oil pressure from a simple, inline return-less regulator that includes a serviceable and replaceable built-in 44-micron stainless steel mesh oil filter, which provides another layer of defense against debris in your engine oil damaging your turbocharger. The OPR V2s achieve target oil pressure through Turbosmart's patent pending flow control strategy, delivering a laminar flow of oil to your turbocharger, no matter the base engine oil pressure or temperature. Suitable for all known engine oils, the OPR V2s will down regulate any oil pressure to ensure the critical balances inside your turbocharger (exhaust drive, back, and charge pressures) are not compromised by over-pressurized engine oil causing consumption of oil and smoking. They eliminate trial and error with restrictors and orifice sizes, or the need to fit and plumb a return line to regulate pressure. Additional features: * Aluminum (6262 T-6) anodized body and valve * Output regulated oil pressure suits most turbochargers * Stainless steel (304) mesh oil filter * -4 AN inlet and outlet * 1/8 in. NPT sensor/gauge port * Directional inlet feed logic
( 3 )
$138.46
Peterson Fluid Systems Oil Pressure Relief Valves
Peterson Fluid Systems oil pressure relief valves are a must to help control the maximum pressure allowed in the circuit. This protects your vehicle from pressure spikes that may cause damage to the engine and other internal components. These billet aluminum valves are adjustable, and are available in a variety of in/out AN sizes.
( 5 )
$204.99
—
$224.99
Turbosmart ProOPR Rising Rate Turbo Oil Pressure Regulators
Turbosmart ProOPR regulators are designed for large turbocharger systems and high boost levels where additional pressure and confidence is required at high boost, high shaft speed, and horsepower levels. These rising rate oil pressure regulators are boost referenced, not unlike your fuel pressure regulator, and allow lower oil pressure at lower boost pressures and increase oil supply pressure to the bearing system at higher boost levels. Turbosmart ProOPRs feature a twin outlet system that also creates a "T" in your turbocharger oil supply line for simplicity of plumbing and connection for up to two turbochargers. And while they have a returnless inline design, they use a boost reference to create a pressure differential, targeting the appropriate bearing pressure at low and zero boost pressure to eliminate your turbocharger digesting oil, while also providing increased oil pressure at higher boost levels to provide increased protection and confidence. Additional features: * Aluminum (6262 T-6) anodized body and valve * 1/8 in. NPT sensor/gauge port * 1/8 in. NPT boost reference port * 4 AN inlet * 1/8 in. NPT regulated oil outlets
Not Yet Reviewed
$219.95
Milodon Externally Adjustable Oil Pressure Regulators
Milodon externally adjustable oil pressure regulators will allow you to adjust the oil pump pressure without removing the oil pan or oiling system. They feature a spring-activated, stainless steel pressure valve that is adjusted by an external stud and bolt assembly.
( 6 )
$65.95
Chevrolet Performance Oil Pressure Relief Valve Deflectors
Chevrolet Performance oil pressure deflectors are stock replacements for those in your GM LS engine. Keep the engine oil returning to the pan as efficiently as possible with Chevrolet Performance oil pressure deflectors.
( 2 )
$6.99
Turbosmart OPR T40 Oil Pressure Regulators
Many turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern and high-performance engines. Feeding these turbochargers the appropriate oil pressure has always been challenging. Traditional methods to limit oil pressure have been with a restrictor aimed at reducing pressure, which also reduces flow. Turbosmart OPR T40 are true regulators allowing the target oil pressure of 40 psi to be achieved without compromising oil flow. This takes the guesswork out of the restrictor or feed and drain hose selection and ensures the oil going to the turbocharger never exceeds the manufacturer's tolerances, providing you with a rock-solid oil supply pressure within the manufacture's tolerances. Turbosmart OPR T40 regulators are available in black or blue, as well as a special edition all-black "sleeper" version. Select the one you like best. Features: * Fixed 40 psi configuration * -4 AN ports * 1/8 in. NPT gauge port
( 5 )
$128.90
—
$138.95
ACDelco Engine Oil Pump Relief Valves
ACDelco offers engine oil pump relief valves for a variety of specific applications. These replacements help regulate oil pressure and protect your engine from being damaged by high oil pressure. The valves typically open automatically when they exceed a preset value. They're designed, engineered, and tested to rigorous standards—all backed by General Motors. GM Genuine Parts are true OE components installed during the production of (or validated for) GM vehicles. Order the relief valve recommended for your vehicle.
( 2 )
$11.99
ACDelco GM Genuine Parts Oil Pressure Relief Valves
ACDelco GM Genuine Parts engine oil pressure relief valves are designed, engineered, and tested to rigorous standards—all backed by General Motors. These oil pressure relief valves help regulate oil pressure and protect your engine from being damaged by high oil pressure. The valves typically open automatically when they exceed a preset value. GM Genuine Parts are true OE components installed during the production of (or validated for) GM vehicles. Order the recommended model for your vehicle.
Not Yet Reviewed
$10.99
—
$12.99
ACDelco GM Genuine Parts Engine Oil Drainback Valves
ACDelco GM Genuine Parts engine oil drainback valves are designed, engineered, and tested to rigorous standards—all backed by General Motors. These quality replacement parts are designed to help prevent oil from draining out of your vehicle's filter, thus supporting proper operation at start up. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Order the engine oil drainback valves recommended for your GM vehicle's application.
Not Yet Reviewed
$9.99
Canton Racing Accusump Electric Pressure Control Valve Kits
Canton Racing Accusump electric pressure control valve kits are available for discharge/refill in different psi ranges to suit your needs. These valves have the convenience of an electric valve for remote-mounted units and the rapid refill rate of a manual valve as required in racing. The electric pressure control valving will only allow the Accusump to discharge oil when the engine's oil pressure drops below a predetermined level, and only refills when the pressure rises above that level. Each kit comes with a regulator, electric valve, wire, toggle switch, pipe nipple, terminals, and instructions.
( 9 )
$324.00
Milodon High Volume/High Pressure Oil Pumps
Milodon high volume/high pressure oil pumps provide a 20 to 30 percent increase in both volume and pressure, where most heavy duty and performance applications require an increase in both areas. Increased bearing loads, rpm, and horsepower all place greater a demand on the oil system, which if not up to the job, can cause premature engine failure. All Milodon oil pumps are 100 percent flow-tested to assure you the quality your engine demands.
( 28 )
$84.99
—
$369.95
Summit Racing™ LS Oil Pan Pressure Relief Valve Plugs
Oil pan pressure relief valve plugs are typically used to delete the secondary pressure relief valve when the Active Fuel Management (AFM) and/or the Variable Valve Timing (VVT) has been deleted. Our Summit Racing™ LS Oil Pan Pressure Relief Valve Plugs feature steel construction, a black finish, internal Allen-style head, and include an aluminum crush washer to deliver a complete seal into most LS pans with a secondary pressure relieve valve.
( 2 )
$7.99
Dorman Engine Oil Pressure Filters
Dorman engine oil pressure filters restore proper oil pressure to prevent engine damage. These direct-replacement parts offer a proper fit to screen oil before the oil pressure sensor, and now you can replace just the failed filter screen instead of the whole assembly. Save yourself some time and money with Dorman engine oil pressure filters.
( 1 )
$7.99
ICT Billet LS Oil Pan Pressure Relief Valve Plugs
For use with DOD and AFM deleted engines, ICT Billet LS oil pan pressure relief valve plugs replace the factory relief valve located inside the oil pan, next to the external oil port passages. They prevent loss of oil pressure from damaged or clogged relief valves. ICT kits include a plug and sealing washer. They utilize an 8mm Allen wrench (not included).
Not Yet Reviewed
$11.99
Engine Works LS Oil Pan Pressure Relief Valve Plugs
Engine Works LS oil pan pressure relief valve plugs are typically used to delete the secondary pressure relief valve when the active fuel management (AFM) and/or the variable valve timing (VVT) has been deleted. The kit includes plug with crush washer.
Not Yet Reviewed
$8.71
Mopar Performance Oil Pressure Relief Springs
Mopar Performance oil pressure relief springs are designed to increase oil pressure over the stock spring for high performance engine applications. They are manufactured from durable steel and can deliver up to 70 lbs. of oil pressure. Available for most Mopar engines, Mopar Performance oil pressure relief springs are an economical solution to those low oil pressure problems.
( 11 )
$6.99
—
$7.99
Clear View Filtration Pressure Port Fittings
Clear View Filtration pressure port fittings are the genuine replacements for your See Through filter assemblies and block adapters. They are available in several sizes and styles in anodized aluminum or zinc plated steel with sealing O-rings.
( 1 )
$7.95
BD Diesel High-Pressure Oil Pumps
One of the key fuel injection components of the 7.3L and 6.0L engines is the BD Diesel High-Pressure Oil Pump (HPOP). They're also a common replacement part when dealing with low oil pressure problems—which can result in poor fuel atomization, loss of power, excessive smoke levels and/or loss of economy. Order the oil pump recommended for your vehicle application.
Not Yet Reviewed
$479.95
Melling High-Pressure Oil Pump Springs
A higher pressure bypass spring in an oil pump forces more oil through the engine, while a lower pressure spring allows for more oil to be recycled within the pump. These Melling high-pressure oil pump springs allow you to replace your stock standard pressure spring with a higher pressure spring to keep your oil pump functioning at its optimum best.
( 25 )
$6.99
—
$10.99
Moroso High-Pressure Oil Pump Relief Springs
Designed by Jack Roush, Moroso high-pressure relief springs for Ford 351C and 400M engines increase oil pressure to approximately 100 psi for better lubrication at high rpm.
Not Yet Reviewed
$2.99
—
$22.99
Standard Motor Diesel Injection High-Pressure Oil Pumps
Standard Motor diesel injection high-pressure oil pumps (HPOP) deliver oil to the fuel injectors, which operate hydraulically to ensure superior performance. These oil pumps are the product of an in-depth remanufacturing process that includes inspection, tear down and validation, cleaning, reassembly, and testing. Order the model recommended for your vehicle.
( 1 )
$552.99
—
$2,778.99
On Sale
Holley Ford 7.3L Godzilla High-Pressure Oil Pump Springs
For certain applications, higher than normal oil pressure is required. Typically, the oil pan must be removed to change the pressure spring on an oil pump. The Holley oil system allows direct access to the spring through the access port on the bottom front of the pan. Holley's high-pressure spring for Ford 7.3L Godzilla engines with their oil pump and pan can be purchased and installed to increase oil pressure by approximately 10 psi at higher rpms. To change the spring, remove the port plug, spring, and plunger. In some cases, the plunger may stay in the port. Make sure when reassembling the plunger is on top of the spring and oriented correctly.
Not Yet Reviewed
$19.95
$11.24
Bostech Remanufactured High-Pressure Oil Pumps
Bostech high-pressure oil pumps are available for Cummins, Duramax, and Powerstoke diesels to ensure your stock or built engine receives proper lubrication. These remanufactured oil pumps are direct fit bolt-on units that include gaskets, seals, and other hardware for proper installation. Built diesel engines are prone to oil starvation of internal parts and the turbocharger, so you need all the oil you can get to protect your valuable investment. Order the model recommended for your application.
Not Yet Reviewed
$479.95
—
$1,295.95
Sealed Power High-Pressure Oil Pumps
Sealed Power high-pressure oil pumps solve your oiling woes in your high performance engine. The higher oil pressure aids in maintaining the oil film thickness in many areas subject to extreme loads. Engines that operate under heavy loads but still use stock bearing clearances will benefit from a high pressure pump. Supercharged or nitrous applications can also benefit from performance of a high pressure oil pump.
( 6 )
$48.99
—
$106.99
