Oiling Systems - Oil Pans, Pumps & More

Beck/Arnley Oil Filler Caps

Beck/Arnley oil filler caps supply an OE-fit to keep oil clean. If your cap is not sealing properly, it needs to be replaced. You can count on the selection of Beck/Arnley oil filler caps to deliver the proper fit and performance to maintain the lifeblood of your engine.

5.0 out of 5 stars ( 1 )

$32.99

Dorman Oil Filter Canister Caps

Your oil filter is a key component in keeping your engine running smoothly. These Dorman oil filter canister caps are made of materials that meet or exceed your original equipment. Make sure that you keep your ride at its peak performance with Dorman oil filter canister caps.

3.0 out of 5 stars ( 2 )

$11.50

—

$81.99

ModQuad Racing Dipsticks

ATV accessories have an enhanced look, thanks to ModQuad Racing. Their line of dipsticks, for instance, is crafted from top-quality 6061 billet aluminum, and then polished to a mirror-like shine or anodized with a red, blue, or black finish. Each dipstick is attached to a screw-in oil cap, and most include an O-ring seal. ModQuad Racing dipsticks are available for fitment on a variety of sub models from makers such as Yamaha, Honda®, Kawasaki, and Suzuki. Now, when you check your engine oil, you'll be holding all-terrain parts excellence!

Not Yet Reviewed

$31.99

—

$33.99

Holley Bolt-On Fill Cap Kits

Holley bolt-on fill cap kits allow you to put a fill cap or inspection plug anywhere they're needed. These particular kits make a great alternative to a stock fuel cell cap—or if you need a fill cap for that custom oil tank or valve covers you're building. Holley bolt-on fill cap kit additional features include: * CNC-machined from 6061 T-6 billet aluminum * Bright black anodized finish for corrosion protection * 2.17 in. 4-bolt style flange * Cap features a laser-etched "Holley Equipped" logo * Bolt-on fill cap with an O-ring seal (has 1.38 in. diameter opening) * Easy-to-grip screw-on cap * Thread 1 1/2 in.-12 * Stainless steel hardware included

5.0 out of 5 stars ( 6 )

$90.45

Tuff Stuff Performance Power Steering Pump Replacement Parts

If your Tuff Stuff Performance power steering pump is malfunctioning, simply order the direct-fit replacement parts needed for repair instead of buying an entire unit. Tuff Stuff offers a complete line of valves, spacers, caps, hardware, and more. No need to battle with a faulty steering system—when you can swap out the problem parts for dependable performance from Tuff Stuff.

4.71 out of 5 stars ( 14 )

$21.99

—

$25.99

HardDrive Oil Dipsticks and Filler Caps

Customize your Harley® with one of these HardDrive oil dipsticks and filler caps. These push-in accessories are made from steel with a brilliant chrome finish. In addition to the one-piece cap and dipstick, some models also include an analog oil temperature gauge that displays from 50 to 350 degrees F. Choose the style designed for fitment with your particular bike.

5.0 out of 5 stars ( 2 )

$13.46

—

$39.56

Rein Automotive Engine Oil Filter Housing Caps

Rein Automotive engine oil filter housing caps fit European vehicles the way the original manufacturer intended. Designed to match or exceed the OE materials, they are available as direct-fit replacements for the specified vehicles. If your filter housing cap is difficult to remove or reinstall due to wear, select a new one from Rein for your vehicle. Additional features: * Prevents moisture and debris from entering and contaminating the system * Manufactured to strict engineering standards/specifications in materials and tolerances * Produced by an original equipment supplier.

Not Yet Reviewed

$25.99

Biker's Choice Oil Tank Dipsticks with Gauge

Biker's Choice oil tank dipsticks with gauge are available in analog with a 350 degree range and in digital styles. The digital dipsticks offer LCD display with blue backlight for viewing when dark, Celsius/Fahrenheit reads, automatic off, and overheat warning functions.

Not Yet Reviewed

$40.99

Moroso Main Cap Baffles

Designed to stop oil from climbing up the back of your oil pan under hard acceleration, and foaming due to contact with the rotating assembly, Moroso main cap baffles bolt between the main bearing cap and the oil pump or pump extension. They are ideal for street or racing use.

3.71 out of 5 stars ( 7 )

$22.99

Mopar Performance Oil Pressure Relief Springs

Mopar Performance oil pressure relief springs are designed to increase oil pressure over the stock spring for high performance engine applications. They are manufactured from durable steel and can deliver up to 70 lbs. of oil pressure. Available for most Mopar engines, Mopar Performance oil pressure relief springs are an economical solution to those low oil pressure problems.

3.73 out of 5 stars ( 11 )

$6.99

—

$7.99

Canton Racing Oil Pump Pickup Studs

Canton Racing provides oil pump pickup studs for those early-style engines that were not equipped with a main cap stud to support the pickup. These steel studs with a black oxide finish will meet your early-style engine application needs or replace your existing application.

4.32 out of 5 stars ( 19 )

$38.00

—

$48.00

Summit Racing™ Ultimate Oil Separators and Catch Cans

Summit Racing™ ultimate oil separators and catch cans protect your engine by capturing oil and water vapors trapped in your crankcase that normally find their way through the PCV system and into the intake tract to be burned in the combustion process, which could leave deposits or cause detonation. The design team at Summit Racing™ started with a clean sheet to build a unique baffling system that catches nearly 100 percent of air born oil and other vapors. Various models are available that vent externally, recirculate, or recirculate with a pressure relief system. Check out the list of cool features of our ultimate oil separators and catch cans below. * Billet aluminum can with laser-etched labeling * Black anodized finish * Available in standard and high capacity sizes * Direct-fit models Coming Soon * Vented versions for racing * Pressure relief recirculating models that retain emissions * Configurable design to allow for multiple levels of flow * Breather can has threads on the outlet to allow for -12 fitting to be used for recirc applications * Race Breather can has NPT threads for optional filter for enhanced oil vapor separation * Modular and expandable design * Accepts any standard -10 ORB fittings * Supplied with a universal stainless-steel bracket * Multiple mounting orientations * 1/4 in. NPT drain port for easy servicing * Double O-ring reservoir end cap to eliminate leakage * Supplied with two -10 AN fittings * Pressure relief can has overpressure protection to vent to a remote reservoir * All components are serviceable * Breather can is supplied with high-flow air filter element * Simple and effective baffle design

5.0 out of 5 stars ( 1 )

$199.99

—

$499.99

Canton Racing Dry Sump Tanks

Choose your dry sump oil tank from the pros at Canton Racing. Their selection now includes not only their universal tanks featuring 3-stage de-aeration baffling, but also a sprint-style tank with 4-stage de-areation baffling. All are fabricated from .100 in. thick aluminum, pressure tested, and TIG welded to deliver lightweight yet strong tanks with less possibility of leaks and cracks. Canton Racing focuses on accuracy and reliability to create better quality dry sump oil tanks. Other features of Canton Racing dry sump tanks: * 10 qt. capacities * Spiral runner for oil return * Large fill cap * Integral brackets allow for easy and secure mounting * 1 1/16-12 female bungs for feed and return lines * 1/2-20 drain port with magnetic drain plug * 1/2 in. NPT vent port

1.5 out of 5 stars ( 2 )

$383.00

Peterson Fluid Systems Drag Race Dry Sump Oil Tanks

Peterson Fluid Systems Drag Race dry sump oil tanks add race-proven design and performance to your vehicle. These units have been verified by Kurt and Warren Johnson to provide excellent oil control with absolutely no blowing oil. They are offered with integrated catch can or breather fittings for use with an external breather can. Peterson Fluid Systems Drag Race oil tanks feature: * All-aluminum construction * Lightweight billet aluminum cap and rings * Built using high-quality spinnings * Hand TIG-welded and pressure tested * Fully baffled inside for oil and air control * Heater bung for immersion-style heater * Optional NHRA approved breather can

3.0 out of 5 stars ( 1 )

$926.99

—

$1,496.99

Fram HP Series Oil Filters

For maximum performance and durability on the street or at the track, trust Fram HP Series oil filters. They offer twice the oil flow rate and four times the dirt-holding capacity of standard oil filters. Their extra-thick steel cans and heavier gauge tapping plates are designed to withstand the high pressures and flexing caused by demanding driving conditions. Tough steel end caps hold a spiral-shaped center tube to offer more durability and protection against collapse. Fram HP Series oil filters are compatible with all oil types and have been optimized for racing and high performance street cars. Additional features include: * Low-restriction racing media designed for high oil flow * 94 percent efficiency at 20 microns * Silicone anti-drainback valve on many applications * 10 to 18 gpm recommended maximum oil flow, depending on model * Maximum burst pressure: 350 to 500 psi, depending on model * Maximum operating pressure of 200 psi * Screen over bypass valve for extra protection against large contaminants * High-flow bypass valve * Flanged steel end caps

4.63 out of 5 stars ( 60 )

$16.99

—

$36.99

Peterson Fluid Systems 400 Series Filters

Peterson Fluid Systems 400 Series filters provide the best filtering available for fuel or oil. Features include an anodized billet body and caps for durability and resistance to fluid corrosion; a stainless steel mesh element for corrosion resistance; and a pleated element for high flow. They are available in -8 thru -20 AN inlet/outlet sizes, as well as a line of accessory end caps to facilitate the use of temperature probes, accessory oiling and fuel return lines. Filter element choices include 45, 60, 75 and 100 micron stainless or 10/20 micron cellulose, with or without bypass.

Not Yet Reviewed

$212.99

—

$314.99

Canton Racing Accusump Mounting Clamps

Accusump mounting clamps by Canton Racing are required for all Accusumps. When used on each end of an Accusump, they provide proper support at the end caps to ensure that the tube does not become distorted. They're available in billet aluminum or stainless steel to provide support and an attractive presentation.

4.64 out of 5 stars ( 11 )

$34.00

—

$148.00

Moroso Dry Sump Oil Tanks

These Moroso dry sump oil tanks are designed to separate air quickly from the oil, prevent foaming and ensuring a continuous supply of oil to the pump under all racing conditions. As oil enters the tank, it rotates around the tank wall and de-aerates by spreading over a large surface area, allowing trapped air bubbles to dissipate quickly. This then lets the restored oil flow easily to the bottom outlet of the tank, where it can return to the pump and engine. The oil tanks are supplied with or without integral filtered breather tanks, and all have carefully engineered inlet locations with -AN fittings, large diameter billet aluminum screw-on filler caps, and drain plugs. They are made of aluminum and are TIG-welded for the ultimate in durability.

5.0 out of 5 stars ( 3 )

$653.99

—

$1,033.99

Peterson Fluid Systems 400 Series Elements

Peterson Fluid Systems 400 Series elements are built using only the highest quality components. They feature anodized CNC-machined aluminum end caps, pleated stainless steel or cellulose media, and high-quality epoxy for compatibility with most fluids. These replacements are available in a variety of micron filter ratings, sizes, colors and with or without bypass options.

Not Yet Reviewed

$88.99

—

$146.99

Standard Motor Engine Oil Filter Housings

For over 100 years, professional technicians have trusted Standard Motor to replace failed OE parts. Standard manufacturers the highest quality, best-performing parts for all import and domestic vehicles; gas, diesel, electric and hybrid. Precision manufacturing, multiple layers of testing, and a detailed validation process ensure Standard parts don't just fit, they perform and they last. These replacement engine oil filter housings come complete and fully assembled—ready for installation, saving time with every repair. They include the correct oil filter, cap, bypass valve, heat exchanger (cooler), oil pressure sensor, oil temperature sensor, gaskets, and bolts. They do not require reusing any of the old components. Standard Motor's high-strength, glass-filled nylon plastic housing is less prone to cracking and helps cool the oil. Aftermarket housings made with different materials than OE may retain more heat than the factory intended. The housings use the correct, vehicle-specific oil filter for a perfect match, eliminating problems for future oil changes. Detailed, illustrated instructions with torque specs are included to help make installation easier. Order the housing designed for your application.

Not Yet Reviewed

$140.50

—

$519.99

Summit Racing™ High Performance Race Oil Pumps

Summit Racing™ High Performance Race Oil Pumps are competition ready pumps loaded with all kind of features that set them apart from stock replacement cast oil pumps known to break in racing applications. Hand assembled in the USA and built for racers by oil pump experts. They feature things like exact gear mesh, precision machining tolerances to blueprint specifications and many other features listed below. • High Strength Nodular Iron Castings (60,000 psi) • Available in Standard and Xtra Volume versions • Threaded cap screw replaces roll pin that retains oil pressure spring= quick changes • All surfaces Hand lapped Main Body, Cap Mating, and Cover Plate • Hand lapped gear thrust surfaces for .002-.003 endplay • Hone Finished Valve bores and Main Drive Hole • Micro polish valve cup body

3.86 out of 5 stars ( 14 )

$61.99

—

$199.99

Sierra Marine Outboard Fill/Drain Kits

Sierra Marine outboard fill/drain kits come with all the necessary components to convert your existing drive unit. They will assist you in performing quick checks to ensure lubricant has not become contaminated, as well as providing a cleaner way to purge and replace the existing lubricant, without the risk of spills. Features: * Marine-grade stainless steel construction to withstand harsh environments * Adapters feature a spring-assisted check valve to prevent leaks, while allowing ease of access to check the condition of the lubricant * Lower adapter is equipped with a magnet to secure metal particles that may contaminate the lubricant * Stainless steel debris cap secures into the lower adapter, so opening does not become blocked in the event of an impact * Includes all-in-one tool to install adapters and debris cap--attaches to your keyring * Barbed service adapters allow you to affix a hose and direct it into an appropriate container or connect to an evacuator

Not Yet Reviewed

$25.99

Clearance

Sierra Marine Sterndrive Fill/Drain Kits

Sierra Marine Sterndrive fill/drain kits come with all the necessary components to convert your existing drive unit. They will assist you in performing quick checks to ensure lubricant has not become contaminated, as well as providing a cleaner way to purge and replace the existing lubricant, without the risk of spills. Features: * Marine-grade stainless steel construction to withstand harsh environments * Adapters feature a spring-assisted check valve to prevent leaks, while allowing ease of access to check the condition of the lubricant * Lower adapter is equipped with a magnet to secure metal particles that may contaminate the lubricant * Stainless steel debris cap secures into the lower adapter, so opening does not become blocked in the event of an impact * Includes all-in-one tool to install adapters and debris cap--attaches to your keyring * Barbed service adapters allow you to affix a hose and direct it into an appropriate container or connect to an evacuator

Not Yet Reviewed

$25.99

$17.50

Eddie Marine Billet Aluminum Breather Tanks with Brackets

Eddie Marine billet aluminum breather tanks with brackets are fabricated from thick-wall aluminum tubing and are ideal for capturing messy oil blow-by. The tanks have 1/8 in. NPT drain plugs, removable breather caps, and they are threaded for -16 AN fittings. The integral brackets accept four 1/4 in.-20 fasteners for mounting.

Not Yet Reviewed

$259.95