Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
14 Results Found For "Blue"
Showing In Stock Items. Show All 18 Items.
Ford Performance Parts Oil Filter Adapters
Have you ever wondered where you were going to put your oil filter? Doesn't it always seem to be in the way of other accessories? Not anymore with these handy Ford Performance Parts oil filter adapters. They simply screw into the block and rotate the filter toward the front of the engine to provide clearance for engine swaps and chassis modifications. The adapters are available in different models for use with over a thousand applications.
( 21 )
$154.99
Moroso Oil Filter Bypass Plates
True racing parts from Moroso! Oil filter aluminum bypass plates replace the engine-mounted oil filter in wet sump oiling systems and direct the oil to a remote oil filter or oil cooler. They're drilled and tapped for -10 AN O-ring inlet and outlet fittings, and include all mounting hardware, gaskets, and an O-ring.
( 3 )
$103.99
Ford Performance Parts Coyote Remote Oil Filter Adapters
Ford Performance Parts Coyote remote filter adapters are designed to allow you to install a remote mounted oil filter and oil cooler. They are made using top-quality billet aluminum and include mounting hardware. *Fits Mustang Engines Only *Does not fit F-150 5.0 engines due to differences in timing cover *Allows installation of remote mounted oil filter and oil cooler *Deletes oil bypass solenoid on 2018-2023 engines
( 3 )
$239.99
On Sale
Scott Drake Oil Pans
Scott Drake oil pans feature the same high-quality construction as the popular factory oil pans. Some pans feature baffling for performance applications which reduces the possibility of oil starvation during extreme driving. If you're looking for oil pans for your Ford, Scott Drake has you covered.
( 44 )
$118.95
$101.95
—
$107.05
Clearance
Turbosmart OPR T40 Oil Pressure Regulators
Many turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern and high-performance engines. Feeding these turbochargers the appropriate oil pressure has always been challenging. Traditional methods to limit oil pressure have been with a restrictor aimed at reducing pressure, which also reduces flow. Turbosmart OPR T40 are true regulators allowing the target oil pressure of 40 psi to be achieved without compromising oil flow. This takes the guesswork out of the restrictor or feed and drain hose selection and ensures the oil going to the turbocharger never exceeds the manufacturer's tolerances, providing you with a rock-solid oil supply pressure within the manufacture's tolerances. Turbosmart OPR T40 regulators are available in black or blue, as well as a special edition all-black "sleeper" version. Select the one you like best. Features: * Fixed 40 psi configuration * -4 AN ports * 1/8 in. NPT gauge port
( 1 )
$134.95
—
$138.95
Volant Oil Catch Cans
Volant Performance offers engine oil catch cans for a wide range of vehicles, including many Cadillac, Chevrolet, GMC, Jeep, Ram, and Ford trucks from 2007 and up. Made from 6061 aluminum and featuring a multi-stage oil separation system, these catch cans work to eliminate blow-by of gas, water, oil vapors and particulates from the airpath. By reducing the impacts of blow-by, oil catch cans prevent damage to sensitive intake components and help reduce carbon build-up on valves that over time reduce engine performance. Each vehicle-specific oil catch can has been designed with OEM-style quick-disconnect fittings, premium automotive-grade hoses, and upgraded components to ensure your vehicle runs at peak performance. Through careful design, Volant engineers have mounted each oil catch can in an easily accessible yet safe location, allowing for ease of serviceability. Additional details: * Installs In 30 minutes or less on most applications * Threaded can housing allows for ease of serviceability * Generous 3 oz. capacity lengthens service interval levels * Flattened machined catch can top and knurled bottom allow ease of maintenance * Multi-stage system separates oil from air and preventing re-entry into system * Blue anodized all-aluminum 6061 construction guards against corrosion ensuring performance * May help reduce emissions by capturing hydrocarbon emissions * Brackets provide a secure mounting location that will not stress sensitive engine components * Multi-ply reinforced automotive-grade hoses provide a secure fitment and last connection
Not Yet Reviewed
$139.90
Mishimoto Baffled Oil Catch Cans
Mishimoto baffled oil catch cans are designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. They feature custom grooves in the catch can's inlet that turbulates the air longer and ensures that all of the oil sinks to the bottom, leaving nothing but clean air to pass through the 40 micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions. These catch cans are machined from 100 percent billet 6061 aluminum, and accept AN fittings at the inlet, outlet, and drain area—allowing for over 27 possible configurations. For maximum fitment options, the top cog mounting setup enables the cans to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for AN return to the oil pan. Mishimoto baffled oil catch cans are washable, unlike many other cans that require you to replace your filtration system, and they're available in a variety of colors. Order the model recommended to fit your vehicle, engine, and/or transmission application.
( 35 )
$249.95
Eddie Marine Billet Aluminum Oil Tank Hold-Down Brackets
Eddie Marine billet aluminum oil tank hold-down brackets not only look great, they'll also secure your Mercury 2-stroke oil tank in the rough conditions that high performance boats often experience. The mounts include a boxed base, billet cover, billet stanchions, and stainless steel fasteners to hold the assembly together. The included tanks are 7 1/4 in. in tall x 9 1/4 in. wide x 13 5/8 in. long. Eddie Marine offers billet aluminum oil tank hold-down brackets in a bright polished finish, as well as a variety of anodized or Fusioncoat colors—please specify when ordering.
Not Yet Reviewed
$219.95
Eddie Marine Billet Aluminum Oil Filter Heads
Eddie Marine's billet aluminum oil filter heads are the newest addition to their line of billet hardware. The oil filter assemblies are equipped with four 1/2 in. NPT inlet/outlets to provide added plumbing flexibility. They're available in a bight polished finish, as well as Fusioncoat or anodized colors. These billet aluminum oil filter heads are for use with Ford oil filters. (This is the oil filter head only. Filter is sold separately).
Not Yet Reviewed
$169.95
Moroso Large Diameter Remote Oil Filter Mounts
Moroso large-diameter remote oil filter mounts feature a compact, low-profile design that facilitates installation in crowded areas. They are manufactured from 6061-T6 billet aluminum and are anodized blue to resist corrosion. The mounts include two screw-in adapters to cover most large-diameter style oil filters. They use -12 AN inlet and outlet threaded fittings that are positioned vertically to improve laminar flow.
Not Yet Reviewed
$179.99
Canton Racing CM Inline Oil Filters
Canton Racing CM inline oil filters are lightweight and have excellent flow due to their straight-through design. These long-life filters feature blue anodized filter bodies and clear anodized removable end caps for element inspection and replacement.
( 1 )
$139.00
Moroso Vacuum Pump Regulators
Moroso vacuum pump regulators are manufactured from 6061 billet aluminum and have a smooth finish to add a bit of dress-up under the hood. The valves can be disassembled for easy cleaning, and will work with any vacuum level. The vacuum relief point is adjustable by shimming an internal spring to get the amount of vacuum desired.
( 1 )
$230.99
Allstar Performance Crank Pulley Mandrel Kits
Prevent mandrel bolt breakage with Allstar Performance crank pulley mandrel kits. Designed specifically for Allstar crank pulleys, these kits provide you with all of the necessary components to connect the mandrel bolt to the mandrel—not the crankshaft—reducing engine harmonics to prevent loosening or breaking. The mandrel kits include all necessary spacers, pulley guides, and bolts to work with most 3, 4, and 5-stage dry sump pumps or belt-driven fuel pumps. (The crank pulley mandrel is also available separately, if desired.)
( 1 )
$168.94
Peterson Fluid Systems 400 Series Elements
Peterson Fluid Systems 400 Series elements are built using only the highest quality components. They feature anodized CNC-machined aluminum end caps, pleated stainless steel or cellulose media, and high-quality epoxy for compatibility with most fluids. These replacements are available in a variety of micron filter ratings, sizes, colors and with or without bypass options.
Not Yet Reviewed
$112.99
—
$146.99
