Availability
Showing In Stock Items. Show All 86 Items.
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 310 )
$39.99
—
$48.99
Ford Performance Parts high performance oil filters are designed and built for high performance use. They're available for a wide variety of applications. Features include: * Synthetic polymer/cellulose-fiber blend media * Heavy-gauge bases and canisters * Higher burst strength and fatigue resistance * High-quality silicone anti-drain back valves * Non-stick sealing gaskets * Long life with all motor oils * Up to 50 percent more filtering capacity than standard filters * Improved filtering efficiency
( 53 )
$20.99
—
$22.99
To maximize filter performance, Moroso race oil filters have a filtration rating of 27 microns. This results in a maximum pressure drop of only 2.5 psi, which results in more flow, less oil bypass, and maximum filtration performance, which is so important in severe racing conditions. Made with roll-formed threads for a precise, tight fit, and with an anti-drainback valve to keep oil in the filter after engine shutdown, they are perfect for any race application.
( 75 )
$27.99
—
$29.99
ARP performance oil pan bolt kits are just what the doctor ordered to cure leakage. They are available in black-oxide finished chromoly or polished stainless steel. Take your pick from conventional hex or compact 12-point style heads and give your oil pan a great seal.
( 171 )
$31.99
—
$59.99
Finish your engine dress up the easy way with Ford Performance Parts engine oil dipsticks and tubes. They are made from triple chrome plated steel, and are available with your choice of a standard, curved, or blue anodized knurled handle. Some of these oil dipsticks and tubes are similar in design to OEM units. Either way, they'll not only increase the beauty of your engine, but will add a new dimension to your entire vehicle.
( 48 )
$39.99
—
$47.99
Our classy Summit Racing™ engine oil dipsticks and tubes will dress up any engine compartment, including yours. They are made from quality steel, with durable finish for good corrosion protection and long life. Get yours today.
( 180 )
$27.99
—
$30.99
Melling oil pump screen assemblies are designed for use with your Melling oil pump. These replacement pickups have a built-in filter screen and are engineered to fit the stock pan and specs—and, in some cases, Street/Strip and Circle Track applications. Various installation methods are available, including bolt-in, press fit, and screw-in. Melling offers nearly 200 models; select the assembly tailored for fitment with your specific vehicle or engine.
( 368 )
$24.99
—
$53.99
Canton Racing oil pan stud kits will make the installation of your oil pan easier. These stainless steel kits hold the gasket in place while you're installing the pan, and will also help with pan alignment.
( 81 )
$22.00
Weiand offers the fix for small block Fords that use pan-mounted dipsticks. Whether your block lacks a dipstick provision or the block mount just doesn't work for your application—Weiand has you covered with their pan-mounted oil dipsticks. They also include the necessary mounting hardware for a complete install.
( 2 )
$47.87
Canton Racing provides oil pump pickup studs for those early-style engines that were not equipped with a main cap stud to support the pickup. These steel studs with a black oxide finish will meet your early-style engine application needs or replace your existing application.
( 18 )
$38.00
—
$48.00
Scott Drake offers these engine oil dipstick tubes for a variety of applications. Scott Drake has designed and manufactured these tubes for a beautiful fit and reliable performance. They're offered in a choice of great finishes, too. You can count on Scott Drake for the excellent quality, style, and performance your ride deserves!
( 36 )
$29.69
—
$32.07
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 229 )
$42.95
—
$49.95
Milodon oil pan stud kits are undoubtedly the best choice for attaching your Milodon oil pan. They include heat-treated studs with rolled threads and special nuts with built-in serrated washer faces. These kits provide easy pan installation and prolonged gasket life, and their special serrated nuts guard against pan loosening during operation.
( 30 )
$43.95
Ford Performance Parts oil pump driveshafts are made from centerless-ground chromoly and have an increased diameter at mid-shaft, which is where most stock shafts fail. They are designed for the rigors of racing and recommended for use in all performance applications.
( 15 )
$39.99
—
$42.99
When good looks are important, Moroso chrome oil filters are the way to go. Outside is a triple process, chrome plated steel housing that's hand-polished and then rack-nickled before chroming to ensure the highest luster possible. Inside is a heat-cured, resin-impregnated element that exceeds OEM specifications for filtration efficiency.
( 23 )
$35.99
Motorcraft oil filters are specifically designed for Ford, Lincoln, and Mercury vehicles. Each filter, including the popular Motorcraft FL-1A, uses as many as 12 high-quality components. Choose the style designed for fitment on your vehicle. Construction features include: * Steel cases: "Ironed" for a precise fit, fluted to ease removal, and painted for rust resistance * Pressure relief valve: When it's cold outside, or if the filters become clogged, oil flow through the filters can be reduced. If this happens, the relief valve opens to provide a continuous oil supply. Its design also minimizes the chance of contaminated oil recirculating back * Anti-drainback valve: This feature keeps oil in the filters to prevent "dry starts" after your engine has been turned off. It's made with specially formulated materials that resist the aging effects that an engine's heat can cause * Efficient filter media: Re-engineered media increases Motorcraft filters' dirt-collecting capabilities, allowing them to capture more engine-harming particles than ever before
( 133 )
$26.99
—
$40.99
Canton Racing offers oil pan pickups for a wide variety of applications. These pickups are designed to be used with Canton Racing oil pans and will ensure consistent oil flow to your engine.
( 133 )
$49.00
Moroso oil pan stud kits make pan installation easy and prolong gasket life. Locking nuts feature attached washers with serrated faces to provide a positive grip on the pan rail. The studs are made of heat-treated Grade 8 steel with black oxide finish, and cadmium and zinc plated nuts. These are also available in a bullet nose version which are rounded on one end for easier starting of oil pan mounting nuts.
( 19 )
$41.99
Champ Pans dipstick assemblies are top-quality replacements for a variety of oil pans, including big and small block Chevys, and small block Chrysler and Ford applications—even big blocks with oil pans for industrial or marine use. The dipsticks are machined from steel with a chrome handle finish, and the tube is included. Order the dipstick assembly recommended for your specific Champ oil pan.
( 6 )
$30.24
These Proform stainless steel oil dipsticks feature an ultra-sleek, thin profile to provide maximum clearance. They are CNC-machined from billet stainless steel to stay bright and rust-free. The dipsticks feature an O-ring seal to keep dirt and moisture out, and the braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 23 )
$52.99
On Sale
The lifeblood of your vehicle is lubricant—which is why Mr. Gasket engine oil dipsticks and tubes are so important. They're small, inexpensive parts that tell you if your oil supply is dangerously low. And besides the function they fulfill, these accessories look great under the hood. Made from steel or billet aluminum, the dipsticks are available in a black, polished, or chrome plated finish. Find the OE-style kit that's built to fit your specific engine application.
( 84 )
$31.48
$20.46
The zinc plated smaller-than-standard hex heads on Mr. Gasket self-locking oil pan bolt kits are ideal for tight spaces. The flange head designs keep the bolt from falling into the socket. Special serrations prevent loosening, and the flange gives uniform clamping pressure.
( 5 )
$34.72
Designed for stock style oil pans, these oil pump pickups from Proform feature a bolt-in design and a zinc iridite finish.
( 5 )
$44.99
—
$54.99
Sealed Power stock replacement oil pumps meet or exceed OE standards for oil delivery volume and pressure. With cast iron bodies and precision machining, they can be relied upon for adequate lubrication in both stock and mild performance rebuilds. Features include: * Direct replacement * Manufactured to strict engineering quality standards * No special tools required * Constructed of high-quality materials for durability
( 35 )
$50.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
