Engine Rotating Assemblies & Rebuild Kits

S&S Cycle 124 in. Big Bore/Stroker Hot Set-Up Kits

The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.

Not Yet Reviewed

$7,104.95

S&S Cycle 107 in. Big Bore Kits

S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance

Not Yet Reviewed

$1,345.95

S&S Cycle Hot Set-Up Twin Cam Cylinders

S&S Cycle Hot Set-Up Twin Cam cylinders are handsomely designed to house your pistons. They are crafted from aluminum, available in a silver, stone gray, or machined wrinkle black finish, and have a stock bolt pattern. Select the Hot Set-Up cylinders designed for your Big Twin engine. Please note: Individual cylinders and cylinder sets without pistons are bored slightly under normal size and are not honed.

Not Yet Reviewed

$924.95

S&S Cycle 106 in. Big Bore Kits

S&S Cycle 106 in. big bore kits will increase the displacement of 95 in. engines to 106 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 106 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 106 in. in. Big Bore kits: * The 106 in. big bore kits yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 3/8 in. stroke, 106 in. displacement, and 10:1 compression ratio with stock heads (9.7:1 compression ratio with S&S 89cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Even though stock cylinders can be bored to fit the 3.927 in. pistons, the included S&S cylinders feature a much stronger liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders * Kits include cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,282.95

—

$1,313.95

S&S Cycle Twin Cam Cylinders

Boost your engine's performance with S&S Cycle's Twin Cam cylinders. The design, finish and workmanship of these cylinder replacements feature many improvements over stock units, including sturdier walls that are far less prone to warpage. Straighter, sturdier walls equals a better seal, and fit for pistons, and piston rings. An improved machining process also ensures a better surface for both the head and base gaskets. These cylinders feature ductile cast-iron sleeves in aluminum castings and are offered in silver and black wrinkle finish. Select the cylinders designed to fit your specific HD® model.

Not Yet Reviewed

$514.95

—

$1,450.95

S&S Cycle 124 in. Hot Set-Up Cylinder Kits

S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern

Not Yet Reviewed

$1,643.95

S&S Cycle 117 in. Big Bore Kits

S&S Cycle 117 in. big bore kits are a popular choice for riders looking to upgrade their engine power without major modifications. Available for a variety of Harley-Davidson® motorcycles, each kit is tailored with the necessary components for your specific HD® model. Many kits come with a powdercoat finish that can match the stock engine look to maintain a clean aesthetic. Using one of S&S Cycle's big bore kits can provide significant benefits like a noticeable increase in horsepower and torque due to the larger engine displacement, relatively easy installation with minimal machine work required, a quality build with durable components, and a good balance of performance and reliability. For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required. Although not mandatory, S&S Cycle recommends adding an oil cooler to bikes ridden in warmer climates. Select the S&S Cycle big bore kit designed for your application needs.

Not Yet Reviewed

$1,643.95

S&S Cycle 111 in. Hot Set-Up Cylinder Kits

S&S Cycle's 111 in. Hot Set Up kits are tailored with the necessary components for your specific Harley-Davidson® model. Using this kit on the stock crankcases provides the benefit of significantly increasing your engine displacement and horsepower without requiring a complete engine rebuild. This allows you to maintain your original engine serial numbers while experiencing noticeable performance gains with a relatively simple installation process, all while utilizing your existing crankcases which can be cost-effective compared to a full engine replacement. After installation, proper tuning on a dyno is recommended to optimize engine performance.

Not Yet Reviewed

$1,643.95

S&S Cycle 124 in. Low Compression Hot Set-Up Cylinder Kits

S&S Cycle 124 in. low compression Hot Set-Up cylinder kits package a piston kit with cylinders for Big Twin engines with stock cylinder heads. The pistons are a dished dome design and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable silver or wrinkle black powdercoat finish * Forged pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. stroke flywheels, resulting in 124 in. displacement

Not Yet Reviewed

$1,643.95

S&S Cycle 106 in. Big Bore Hot Set-Up Kits

S&S Cycle 106 in. Big Bore Hot Set-Up cylinder kits are easy to install. No machining or rebalancing is required, and the engine does not need to be removed from the chassis. With these kits, the resulting 106 in. engine has a compression ratio of 10:1, is stock height (no frame clearance problems), and a stock EFI throttle body will fit. Kits include: * 3.927 in. bore pistons, rings, wrist pins * Big bore cylinders finished in silver or wrinkle black powder coat * 585C chain drive Easy Start camshafts * Chromoly steel adjustable pushrods * High performance tappets * Gaskets

Not Yet Reviewed

$2,143.95