Availability
Summit Bucks
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
Summit Bucks
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
Summit Bucks
S&S Cycle 98 in. big bore kits are a fantastic upgrade if your Harley® is just a bit tired. The thicker and beefier cylinders mean that the engine will run cooler and you'll love the forged pistons that come with the kits. These are the largest bores that can be fit in your stock engine case. The cylinder and piston kits make going to the max bore size easy. There is no machining required and stock engine height is maintained. These kits come with nearly everything needed to get the most out of the added cu. in. to your stock engine. You won't believe how much power these kits produce! Features and specifications: * Kit yields excellent results with stock cylinder heads * Easy installation—no need to bore or split existing cases, just swap the cylinders * Available in a choice of either black or silver powdercoat finish with polished fins * Increased fin area for better heat dissipation * Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams
Not Yet Reviewed
$1,187.06
Summit Bucks
S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern
Not Yet Reviewed
$1,381.46
—
$1,679.95
Summit Bucks
S&S Cycle M8 big bore cylinders are bolt-on sets for Milwaukee 8 models. They are available in a Wrinkle Black finish with or without highlighted fins. Select the set you would like.
Not Yet Reviewed
$662.95
—
$854.06
Summit Bucks
S&S Cycle offers 128 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Available in both chain drive and gear drive variations VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars CAM CHAIN TENSIONER: * Precision-machined from billet aluminum * Thicker shoe for longer wear * Direct chain oiling * Larger piston for more consistent pressure * Tighter tolerances improve stability
Not Yet Reviewed
$3,265.95
Summit Bucks
S&S Cycle offers 128 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Gear drive kits provide improved cam timing accuracy and eliminate stock chain tensioner * Gear drive kits include outer drive gears VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars
Not Yet Reviewed
$3,427.95
—
$3,460.95
Summit Bucks
S&S Cycle offers 129 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,559.95
Summit Bucks
S&S Cycle offers 129 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,359.95
Summit Bucks
S&S Cycle's 96 in. big bore cylinder kits for a Harley-Davidson® motorcycle provides significant benefits by increasing the engine displacement, leading to noticeable power gains, particularly in the low and mid-range torque, resulting in better acceleration and improved overall performance, especially for riders looking for a more powerful ride without drastically altering the engine character. The larger cylinder bore displaces more air, allowing for more fuel to be burned, generating more power throughout the powerband, especially noticeable during acceleration. Big bore kits tend to focus on increasing low and mid-range torque, which is beneficial for everyday riding and pulling heavy loads. With a larger cylinder volume, the engine can react quicker to throttle inputs, leading to a more responsive feel. Compared to other performance modifications, a big bore kit can be a relatively straightforward upgrade, often requiring minimal additional changes to the engine. One of these S&S Cycle 96 in. big bore kits can be a great starting point for further performance upgrades like camshaft changes, ported heads, and upgraded intake systems to maximize power gains.
Not Yet Reviewed
$1,349.95
—
$2,549.95
Summit Bucks
Why put your bike engine back together with stock parts—when you can upgrade with one of the S&S Cycle flywheel assemblies? These 3-piece units are forged and heat-treated from 4140 steel, making them harder and stronger than stock. They're precision-machined to be truer (for less vibration), and are assembled with integral mainshafts and lightweight connecting rod forgings. Stock flywheels shift out of true under heavy loads; improve your motorcycle with an S&S Cycle flywheel assembly.
Not Yet Reviewed
$1,488.95
—
$1,599.95
Summit Bucks
The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.
Not Yet Reviewed
$5,636.66
—
$6,128.06
Summit Bucks
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,095.95
—
$1,999.95
Summit Bucks
S&S Cycle 131 in. big bore kits are aimed at the Milwaukee Eight platform for 2017 and newer big twins—and open up a whole new level of performance for these engines. When paired with an S&S 4.625 in. stroker flywheel (sold separately), engine will be a true 131cubic inches. S&S builds their big bore kits and cranks to much tighter tolerances and with higher quality materials than the factory parts. If you're the proud owner of a Harley-Davidson® Milwaukee Eight big twin and have been waiting for just the thing to boost your M8's power—the wait is over! The S&S Cycle piston/cylinder kits will be a solid platform for massive power! Features and benefits: * Huge displacement increase means huge power increase * Bolt-on kit works with stock crankcases * 4 1/4 in. bore cylinders with a new 11:1 forged piston design * Original engine serial numbers are retained * Powdercoat finish match factory finish, giving the bike a "sleeper" advantage * Includes .045 in. multi-layered steel head gaskets * Retains stock engine height * Includes 131 in. Cam Cover Badge * Available with or without highlighted fins Note: This kit must be used with S&S Cycle stroker flywheels to achieve 131 in. displacement (P/N: 320-0605, 320-0620).
Not Yet Reviewed
$1,403.96
Summit Bucks
Inspired by S&S Pro Stock drag race engines, S&S Cycle 124 in. big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 124 in. big bore kits are available in wrinkle black or wrinkle black with highlighted finned cylinders. Transform your stock engine into a 124 in. monster with the installation of a 124 in. big bore kit from S&S Cycle! S&S Cycle 124 in. big bore kit features: * Available for 107 M8 models * 107 to 124 in. big bore kit * Bolt-on kit * Includes gaskets and hardware required for installation * 4.250 in. bore * Forged Pistons * 11:1 compression ratio
Not Yet Reviewed
$1,405.76
Summit Bucks
The S&S Cycle V111 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V111 engines for 1984-1999 Big Twins. With top-of-the-line components, the V111 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V111 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 111 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,525.95
—
$1,652.95
Summit Bucks
In most cases, it just isn't worth it to try to rebuild your old, cracked, worn-out cylinder heads or to bore the stock cylinders again. S&S Cycle 74 In. Shovelhead top end kits provide everything you need to replace the top end. Pistons are pre-fit to the cylinders, so there is no machine work done and very little down time. Compression pistons come complete with rings and wrist pins, manifold clamps seals, all required hardware, and gaskets. You can't go wrong with these kits. When it comes to reliability and durability, you need quality parts. Fit and quality mean life for your Harley®!
Not Yet Reviewed
$2,816.06
Summit Bucks
Replace that worn out top end with S&S Cycle complete 80 in. top-end replacement kits for Big Twins with band-style heads. They include everything needed to totally replace the top end of your tired Shovelhead engine. The cylinder heads feature high-flowing ports and .590 in. lift capacity for improved performance and easy high-lift camshaft installation, while a moderate 8:1 compression ratio will allow your engine to run well on readily available premium pump gas. S&S Cycle 80 in. top-end kits contain S&S 3 1/2 in. bore high-tensile cast iron cylinders, 3 1/2 in. bore forged pistons, Super Stock cylinder heads, and all the gaskets and hardware necessary.
Not Yet Reviewed
$2,762.96
Summit Bucks
S&S Cycle Hot Set-Up Twin Cam cylinders are handsomely designed to house your pistons. They are crafted from aluminum, available in a silver, stone gray, or machined wrinkle black finish, and have a stock bolt pattern. Select the Hot Set-Up cylinders designed for your Big Twin engine. Please note: Individual cylinders and cylinder sets without pistons are bored slightly under normal size and are not honed.
Not Yet Reviewed
$808.16
—
$953.06
Summit Bucks
S&S Cycle 117 in. big bore kits are a popular choice for riders looking to upgrade their engine power without major modifications. Available for a variety of Harley-Davidson® motorcycles, each kit is tailored with the necessary components for your specific HD® model. Many kits come with a powdercoat finish that can match the stock engine look to maintain a clean aesthetic. Using one of S&S Cycle's big bore kits can provide significant benefits like a noticeable increase in horsepower and torque due to the larger engine displacement, relatively easy installation with minimal machine work required, a quality build with durable components, and a good balance of performance and reliability. For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required. Although not mandatory, S&S Cycle recommends adding an oil cooler to bikes ridden in warmer climates. Select the S&S Cycle big bore kit designed for your application needs.
Not Yet Reviewed
$1,595.95
—
$1,599.95
Summit Bucks
S&S Cycle 124 in. low compression Hot Set-Up cylinder kits package a piston kit with cylinders for Big Twin engines with stock cylinder heads. The pistons are a dished dome design and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. stroke flywheels, resulting in 124 in. displacement
Not Yet Reviewed
$1,285.95
Summit Bucks
The S&S Cycle V124 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V124 engines for 1984-1999 Big Twins. With top-of-the-line components, the V124 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V124 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 124 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,525.95
—
$1,611.95
Summit Bucks
The S&S Cycle V117 cylinder kits are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit by S&S Cycle replaces the cylinders and pistons on early production S&S V117 engines for 1984-1999 Big Twins. With top-of-the-line components, the V117 cylinder kits include S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S V117 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 117 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,399.95
—
$1,514.95
Summit Bucks
The T124 cylinder kits from S&S Cycle are an exceptional choice for riders who choose to re-work their bikes for more power. This 4 1/8 in. bore cylinder and piston kit replaces the cylinders and pistons on early production S&S T124 engines for 1999-2006 Big Twins. The T124 cylinder kits include top-of-the-line components: S&S 4 1/8 in. bore cylinders, forged pistons, rings, wrist pins, head and base gaskets. Pistons are flat topped design intended for use with S&S Super Stock cylinder heads. The cylinders are machined with the S&S bolt pattern and are intended for use in S&S crankcases used in early S&S T124 engines. Designed for 4 3/8 in. stroke flywheels, resulting in 124 in. displacement. For best performance expectations, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning are required.
Not Yet Reviewed
$1,587.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
