Availability
Summit Bucks
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
Summit Bucks
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
Summit Bucks
S&S Cycle 98 in. big bore kits are a fantastic upgrade if your Harley® is just a bit tired. The thicker and beefier cylinders mean that the engine will run cooler and you'll love the forged pistons that come with the kits. These are the largest bores that can be fit in your stock engine case. The cylinder and piston kits make going to the max bore size easy. There is no machining required and stock engine height is maintained. These kits come with nearly everything needed to get the most out of the added cu. in. to your stock engine. You won't believe how much power these kits produce! Features and specifications: * Kit yields excellent results with stock cylinder heads * Easy installation—no need to bore or split existing cases, just swap the cylinders * Available in a choice of either black or silver powdercoat finish with polished fins * Increased fin area for better heat dissipation * Valve pocket recessed in S&S pistons are enlarged for oversize valves and higher lift cams
Not Yet Reviewed
$1,187.06
Summit Bucks
S&S Cycle 124 in. (standard compression) Hot Set-Up cylinder kits package pistons and cylinders for use as replacements or as the basis for a new engine build. The pistons are a flat dome design, and the cylinders are machined with the stock bolt pattern intended for use in stock crankcases. Select the appropriate kit for your Big Twin. S&S cylinder and piston kit contents and notes: * S&S 4 1/8 in. bore cylinders -- Durable wrinkle black powdercoat finish * Forged flat domed pistons, rings, wrist pins * Head and base gaskets * Designed for 4 5/8 in. flywheels, resulting in 124 in. displacement * Cylinders can be used with stock or S&S cylinder heads with stock bolt pattern
Not Yet Reviewed
$1,381.46
—
$1,679.95
Summit Bucks
S&S Cycle offers 128 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Available in both chain drive and gear drive variations VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars CAM CHAIN TENSIONER: * Precision-machined from billet aluminum * Thicker shoe for longer wear * Direct chain oiling * Larger piston for more consistent pressure * Tighter tolerances improve stability
Not Yet Reviewed
$3,265.95
Summit Bucks
S&S Cycle offers 128 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Gear drive kits provide improved cam timing accuracy and eliminate stock chain tensioner * Gear drive kits include outer drive gears VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars
Not Yet Reviewed
$3,427.95
—
$3,460.95
Summit Bucks
S&S Cycle offers 129 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,559.95
Summit Bucks
S&S Cycle offers 129 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,359.95
Summit Bucks
Inspired by S&S Pro Stock drag race engines, S&S Cycle 124 in. big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 124 in. big bore kits are available in wrinkle black or wrinkle black with highlighted finned cylinders. Transform your stock engine into a 124 in. monster with the installation of a 124 in. big bore kit from S&S Cycle! S&S Cycle 124 in. big bore kit features: * Available for 107 M8 models * 107 to 124 in. big bore kit * Bolt-on kit * Includes gaskets and hardware required for installation * 4.250 in. bore * Forged Pistons * 11:1 compression ratio
Not Yet Reviewed
$1,405.76
Summit Bucks
The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.
Not Yet Reviewed
$5,636.66
—
$6,128.06
Summit Bucks
S&S Cycle M8 big bore cylinders are bolt-on sets for Milwaukee 8 models. They are available in a Wrinkle Black finish with or without highlighted fins. Select the set you would like.
Not Yet Reviewed
$662.95
—
$854.06
Summit Bucks
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,095.95
—
$1,999.95
Summit Bucks
S&S Cycle 131 in. big bore kits are aimed at the Milwaukee Eight platform for 2017 and newer big twins—and open up a whole new level of performance for these engines. When paired with an S&S 4.625 in. stroker flywheel (sold separately), engine will be a true 131cubic inches. S&S builds their big bore kits and cranks to much tighter tolerances and with higher quality materials than the factory parts. If you're the proud owner of a Harley-Davidson® Milwaukee Eight big twin and have been waiting for just the thing to boost your M8's power—the wait is over! The S&S Cycle piston/cylinder kits will be a solid platform for massive power! Features and benefits: * Huge displacement increase means huge power increase * Bolt-on kit works with stock crankcases * 4 1/4 in. bore cylinders with a new 11:1 forged piston design * Original engine serial numbers are retained * Powdercoat finish match factory finish, giving the bike a "sleeper" advantage * Includes .045 in. multi-layered steel head gaskets * Retains stock engine height * Includes 131 in. Cam Cover Badge * Available with or without highlighted fins Note: This kit must be used with S&S Cycle stroker flywheels to achieve 131 in. displacement (P/N: 320-0605, 320-0620).
Not Yet Reviewed
$1,403.96
Summit Bucks
Why put your bike engine back together with stock parts—when you can upgrade with one of the S&S Cycle flywheel assemblies? These 3-piece units are forged and heat-treated from 4140 steel, making them harder and stronger than stock. They're precision-machined to be truer (for less vibration), and are assembled with integral mainshafts and lightweight connecting rod forgings. Stock flywheels shift out of true under heavy loads; improve your motorcycle with an S&S Cycle flywheel assembly.
Not Yet Reviewed
$1,488.95
—
$1,599.95
Summit Bucks
S&S Cycle's 96 in. big bore cylinder kits for a Harley-Davidson® motorcycle provides significant benefits by increasing the engine displacement, leading to noticeable power gains, particularly in the low and mid-range torque, resulting in better acceleration and improved overall performance, especially for riders looking for a more powerful ride without drastically altering the engine character. The larger cylinder bore displaces more air, allowing for more fuel to be burned, generating more power throughout the powerband, especially noticeable during acceleration. Big bore kits tend to focus on increasing low and mid-range torque, which is beneficial for everyday riding and pulling heavy loads. With a larger cylinder volume, the engine can react quicker to throttle inputs, leading to a more responsive feel. Compared to other performance modifications, a big bore kit can be a relatively straightforward upgrade, often requiring minimal additional changes to the engine. One of these S&S Cycle 96 in. big bore kits can be a great starting point for further performance upgrades like camshaft changes, ported heads, and upgraded intake systems to maximize power gains.
Not Yet Reviewed
$1,349.95
—
$2,549.95
Summit Bucks
In most cases, it just isn't worth it to try to rebuild your old, cracked, worn-out cylinder heads or to bore the stock cylinders again. S&S Cycle 74 In. Shovelhead top end kits provide everything you need to replace the top end. Pistons are pre-fit to the cylinders, so there is no machine work done and very little down time. Compression pistons come complete with rings and wrist pins, manifold clamps seals, all required hardware, and gaskets. You can't go wrong with these kits. When it comes to reliability and durability, you need quality parts. Fit and quality mean life for your Harley®!
Not Yet Reviewed
$2,816.06
Summit Bucks
Replace that worn out top end with S&S Cycle complete 80 in. top-end replacement kits for Big Twins with band-style heads. They include everything needed to totally replace the top end of your tired Shovelhead engine. The cylinder heads feature high-flowing ports and .590 in. lift capacity for improved performance and easy high-lift camshaft installation, while a moderate 8:1 compression ratio will allow your engine to run well on readily available premium pump gas. S&S Cycle 80 in. top-end kits contain S&S 3 1/2 in. bore high-tensile cast iron cylinders, 3 1/2 in. bore forged pistons, Super Stock cylinder heads, and all the gaskets and hardware necessary.
Not Yet Reviewed
$2,762.96
Summit Bucks
S&S Cycle offers 96 in. Sidewinder Big Bore Stroker kits for a variety of Harley-Davidson© street bikes from 1970 and up. They're an economical route to a larger displacement engine. These kits contain nearly everything needed to take a stock 80 in. Harley-Davidson© Evolution Big Twin engine up to 96 in. displacement. They include S&S 3-5/8 in. bore aluminum Sidewinder cylinders and forged pistons, a 4 5/8 in. stroke dynamically balanced S&S flywheel assembly, complete with S&S heavy-duty connecting rods and mainshafts, head gaskets, base gaskets, and exhaust gaskets. Stock cases will need to be bored out to 3 5/8 in. Cylinders are available in a natural, gloss black, or wrinkle black finish.
Not Yet Reviewed
$2,795.95
—
$4,499.95
Summit Bucks
S&S Cycle offers 89 in. stock bore cylinder kits for various Harley-Davidson® motorcycles, allowing for easy upgrades on a variety of models. One of the key advantages of using one of these S&S Cycle cylinder kits is that they use the stock cylinder bore, and often requires minimal machining or crankcase splitting, making installation relatively straightforward compared to larger big bore kits. There are several benefits of using one of these to upgrade your bike's performance, including increased engine displacement without major modifications to the stock engine, maintaining the original look, cost-effectiveness compared to full big bore kits, and often requiring minimal machining or crankcase splitting for installation. Even with a relatively small displacement increase to 89 cubic inches, the engine will experience a noticeable power boost compared to the stock configuration. To optimize performance, consider upgrading other engine components like pistons, cams, and exhaust systems alongside this S&S Cycle stock bore cylinder kit. Select the kit specifically designed for your Harley® model and year.
Not Yet Reviewed
$1,244.95
—
$1,399.95
Summit Bucks
S&S Cycle's 88 in. big bore kits provide significant benefits by increasing the engine displacement, resulting in more power and torque, especially noticeable in the low to mid-range powerband, while generally maintaining the stock engine character and rideability; essentially giving the bike a stronger punch with increased acceleration without drastically altering its feel. The larger bore size allows for more air and fuel to be ingested per combustion cycle, leading to a noticeable boost in power output, particularly in the low and mid-range rpm bands. For riders who frequently haul loads, the increased torque can be beneficial for pulling heavier trailers or carrying extra cargo. Many 88 in. big bore kits are designed to work with mostly stock components, requiring minimal additional engine modifications for installation. Compared to other performance upgrades like high-lift cams or forced induction, a big bore kit is often considered a cost-effective way to significantly increase engine power. After installing a big bore kit, proper engine tuning with adjustments to the fuel injection or carburetor settings is crucial to optimize performance and ensure efficient combustion. Select the S&S Cycle big bore kit specifically designed for your HD® model and year.
Not Yet Reviewed
$1,359.95
—
$1,999.95
Summit Bucks
S&S Cycle Shovelhead cylinder sets for Big Twin engines are available in different sizes. They are made from high-strength engineering-grade gray cast iron with a durable powdercoat finish for excellent wear resistance. Select the cylinder set designed for your motorcycle engine.
Not Yet Reviewed
$1,599.95
—
$1,699.95
Summit Bucks
The S&S Cycle 74 inch stock bore cylinder kits are intended to replace worn cylinders and pistons of a 74 in. Shovelhead engine for a Harley-Davidson® motorcycle and keep stock compression ratio of 8:1. The primary purpose of these S&S Cycle stock bore cylinder kits is to maintain the original "74 cubic inch" displacement of older Harley-Davidson® engines, essentially allowing for a rebuild, while also keeping the engine size the same without increasing the bore size beyond the standard dimensions for a 74 cubic inch engine.
Not Yet Reviewed
$2,295.95
Summit Bucks
The S&S Cycle 3 7/16 in. bore cylinder kits provide a significant increase in engine displacement, resulting in more power and torque, especially noticeable in the low and mid-range powerband, making for a more potent and responsive riding experience, particularly for cruising and pulling heavy loads. The larger bore allows for more air and fuel to be drawn into the cylinders, leading to a substantial power increase. With more power, the motorcycle will accelerate quicker and more forcefully. This is especially beneficial for riders who frequently ride in stop-and-go traffic or need extra pulling power for towing. A larger bore can be combined with other performance upgrades like high-lift cams, larger carburetors, and upgraded exhaust systems to further enhance power gains. Proper tuning is essential after installing a big bore kit to ensure optimal performance and avoid potential issues. Before ordering, make sure this cylinder kit is compatible with your specific Harley® model/year.
Not Yet Reviewed
$1,999.95
Summit Bucks
The S&S Cycle 80 in. stock bore cylinder kits for a Harley-Davidson® offers the benefit of maintaining the original engine characteristics while providing a reliable and readily available replacement option. Unlike "big bore" kits which enlarge the cylinder diameter to increase engine displacement and horsepower, a stock bore kit simply replaces worn cylinders with new ones of the same size. These stock bore cylinder kits are ideal for situations where you need to rebuild the engine without significantly altering its power delivery or overall performance, while still achieving a quality repair. If your Harley® engine needs a rebuild due to wear and tear, the S&S Cycle 80 in. stock bore cylinder kits are a good choice to restore the engine to its original functionality. Select the S&S Cycle big bore kit specifically designed for your HD® model and year.
Not Yet Reviewed
$1,121.95
—
$2,349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
