Availability
The S&S Cycle 124 in. big bore/stroker Hot Set-Up kits transform a stock Harley-Davidson® engine into a 124 in. monster. It includes: 4 1/8 in. bore pistons; big bore cylinders finished in wrinkle black powdercoat; a dynamically balanced 4 5/8 in. stroke 3-piece flywheel assembly complete with heavy-duty connecting rods and integral mainshafts; 640 gear drive Easy Start camshafts; chromoly steel adjustable pushrods; premium tappets; and Super Stock 91cc cylinder heads. When installed, the kits yield a 124 in. engine with a compression ratio of 11:1. Although the engine is .960 in. taller than stock, there are no frame clearance problems—and a stock EFI throttle body will fit, because the manifold mounting surfaces of the heads have been specially machined to fit a stock length manifold. If you ride a 2006 HD Dyna model, or a balanced or non-balanced Big Twin from 2007-17, these top-end engine rebuild kits are for you. Note: No fuel or ignition system is included. However, for the best results, a larger EFI throttle body, performance intake, and performance exhaust are recommended. The EFI system must be recalibrated. Although not mandatory, S&S recommends adding an oil cooler to bikes ridden in warmer climates. S&S does not recommend compression ratios higher than 10:1 for Tri Glide or other 3-wheel models (including conversions) due to extra loads caused by the lugging nature of these bikes. Detonation and subsequent engine damage may result.
Not Yet Reviewed
$5,636.66
—
$6,128.06
S&S Cycle offers 96 in. Sidewinder Big Bore Stroker kits for a variety of Harley-Davidson© street bikes from 1970 and up. They're an economical route to a larger displacement engine. These kits contain nearly everything needed to take a stock 80 in. Harley-Davidson© Evolution Big Twin engine up to 96 in. displacement. They include S&S 3-5/8 in. bore aluminum Sidewinder cylinders and forged pistons, a 4 5/8 in. stroke dynamically balanced S&S flywheel assembly, complete with S&S heavy-duty connecting rods and mainshafts, head gaskets, base gaskets, and exhaust gaskets. Stock cases will need to be bored out to 3 5/8 in. Cylinders are available in a natural, gloss black, or wrinkle black finish.
Not Yet Reviewed
$2,795.95
—
$4,499.95
S&S Cycle offers 93 in. Sidewinder Big Bore Stroker kits for a variety of Harley-Davidson© street bikes from the 1970s and '80s. They're an economical route to a larger displacement engine. These kits contain nearly everything needed to take a stock 74 in. or 80 in. H-D© shovelhead engine up to 93 in. displacement. They include S&S 3 5/8 in. bore high tensile cast iron Sidewinder cylinders and forged pistons with wristpin and rings, a 4 1/2 in. stroke dynamically balanced S&S flywheel assembly, complete with S&S heavy-duty connecting rods and mainshafts, S&S stainless steel headbolts, base nut, S&S adjustable chromoly steel pushrods, head gaskets, base gaskets, exhaust gaskets, and an S&S heavy duty-top motor mount. Kits are available with 8.5:1 or 9.1:1 compression.
Not Yet Reviewed
$3,795.95
S&S Cycle offers 103 in. Sidewinder Big Bore Stroker kits for a variety of Harley-Davidson© street bikes from the 1970s and '80s. These kits are an economical route to a larger displacement engine. They contain nearly everything needed to take a stock 74 in. or 80 in. H-D© shovelhead engine up to 103 in. displacement. Kits include S&S 3 5/8 in. bore high tensile cast iron Sidewinder cylinders and forged pistons with wristpin and rings, a 5 in. stroke small diameter dynamically balanced S&S flywheel assembly, complete with S&S heavy-duty connecting rods and mainshafts, S&S stainless steel headbolts, base nut, S&S adjustable chromoly steel pushrods, head gaskets, base gaskets, exhaust gaskets, and an S&S heavy-duty top motor mount. Compression is 9.7:1.
Not Yet Reviewed
$4,399.95
In most cases, it just isn't worth it to try to rebuild your old, cracked, worn-out cylinder heads or to bore the stock cylinders again. S&S Cycle 74 In. Shovelhead top end kits provide everything you need to replace the top end. Pistons are pre-fit to the cylinders, so there is no machine work done and very little down time. Compression pistons come complete with rings and wrist pins, manifold clamps seals, all required hardware, and gaskets. You can't go wrong with these kits. When it comes to reliability and durability, you need quality parts. Fit and quality mean life for your Harley®!
Not Yet Reviewed
$2,816.06
Replace that worn out top end with S&S Cycle complete 80 in. top-end replacement kits for Big Twins with band-style heads. They include everything needed to totally replace the top end of your tired Shovelhead engine. The cylinder heads feature high-flowing ports and .590 in. lift capacity for improved performance and easy high-lift camshaft installation, while a moderate 8:1 compression ratio will allow your engine to run well on readily available premium pump gas. S&S Cycle 80 in. top-end kits contain S&S 3 1/2 in. bore high-tensile cast iron cylinders, 3 1/2 in. bore forged pistons, Super Stock cylinder heads, and all the gaskets and hardware necessary.
Not Yet Reviewed
$2,762.96
S&S Cycle 95 in. Super Stock Hot Set-Up Kits are true bolt-on kits. There is no machining required, they maintain stock engine height, and enable up to a 40 hp increase. Components and specs: * .045 in. MLS head gaskets * S&S 585 gear drive cams * S&S high-strength chromoly tubing pushrods * Enlarged valve pocket recesses in S&S pistons accommodate oversize valves and high-lift cams * S&S 3 7/8 in. bore cylinders and pistons * 79cc cylinder heads * Machined wrinkle black powdercoat finish
Not Yet Reviewed
$3,627.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
