Availability
Showing In Stock Items. Show All 52 Items.
World Products Motown LS water return kits consist of quality components needed to plumb your Motown LS block for cool performance. They include a 6061 T-6 billet aluminum Moroso thermostat housing, and PBM Performance red/blue anodized aluminum fittings with either their Pro-Lok blue rubber or Pro-Flo stainless steel braided hose.
Not Yet Reviewed
$351.10
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$109.99
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
On Sale
Summit Racing™ Mockup Replica Blocks are light-weight and ship disassembled for ease of shipping and storage. The individual panels are easily assembled with tabs and slots for superior rigidity and accuracy compared to bolt-together types. Steel resists the heat from welding, so custom motor-mounts can be fabricated right on the block.
( 15 )
$399.99
$199.50
—
$299.99
Cover your oil cooler outlet with Summit Racing™ oil cooler block-off plates. Our covers are machined from billet aluminum and are clear anodized for added durability and looks. They are available with or without ports and include mounting hardware.
( 6 )
$24.99
—
$25.99
Back in the day, Ford engine block castings held up fine against 220 hp--but you couldn't go racing! Canton Racing has designed these main cap girdles to reinforce the alignment of the main caps and counter the limited webbing and weaknesses of those stock blocks. These main cap supports are laser-cut from 1/2 in. to 5/8 in. steel and feature CNC-machined mounting holes and rod notches for stroke clearance. Canton Racing main cap girdles tie directly to the caps, eliminating the need for bushings, spacers, or machining of the main caps for installation. These main cap girdles are black oxide finished for corrosion resistance and all hardware is included to get you racing.
( 18 )
$369.00
—
$498.00
Moroso main cap girdles for Ford are designed to fit 289-302 c.i.d. engines using a 2-bolt main block. They are manufactured from 1/2 in. thick steel and can fit over main caps without the need for additional spacers. The girdles include all necessary mounting hardware and will fit standard high-volume oil pumps.
( 10 )
$334.99
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$19.95
—
$55.95
Dura-Bond timing cover dowels feature quality steel construction and install in your engine block where the timing cover mounting pad is. Speed up your installation with Dura-Bond timing cover dowels. To get the proper fit, form, and function your ride deserves, select the model for your application needs.
( 3 )
$4.99
Earl's Performance oil cooler block-off plates are billet covers—built with an extra 1/8 in. NPT port that can be used for an oil pressure gauge or a turbo oil supply port. The 1/8 in. port is located on the top to provide extra header clearance. These oil cooler block-off plates are designed to fit most GM LS/LT oil pans. Earl's Performance oil cooler block-off plate feature: * Billet aluminum construction with black anodized finish * Includes block-off plate, O-ring seal (no gasket required), and mounting screws
( 9 )
$56.19
—
$63.15
Moroso rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, 1-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation. The adapter kits include all mounting fasteners and required hardware.
( 8 )
$249.99
Allstar Performance extra-long bellhousing dowel pins are approximately 1/2 in. longer than stock pins and are required when running an engine mid-plate, rear motor mounts, or an aftermarket bellhousing. These extended length steel pins also help with alignment when you're installing an engine—and fit most GM blocks. Order the size and style needed for your application.
( 1 )
$10.79
Improved Racing oil cooler adapters have a low-profile for more header clearance. The adapters are machined from a single piece of billet aluminum and black anodized. For additional clearance with reliable sealing, they come with aluminum gaskets fitted with Viton® seals, and the adapter mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface. Select Improved Racing oil cooler adapters are also available with a built-in thermostat. Oil coolers help prevent the oil from getting too hot, but are also prone to lowering oil temperatures too much, especially in colder weather or during highway driving. The rebuildable thermostat speeds warm-up and helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels. Features and benefits * 100 percent bolt-on solution; no fabrication, bending, or line modification is required * Viton® seals throughout for maximum reliability * Oil exiting the adapter is filtered oil * 6061 T-6 billet aluminum construction with black MIL-A-8625 Type II anodized finish * Standard female -8 AN O-ring boss threads for optional anodized adapter fittings in your choice of -8 AN, -10 AN, or -12AN lines * Depending on application, includes port(s) for oil sensors or turbo oil supply * Includes all necessary hardware * Limited lifetime warranty
( 10 )
$159.00
Make timing cover installation easy with Dart timing cover dowel pins. They are made from high-strength steel and install in the engine block where the timing cover mounting pad is. The pins are designed to fit Dart Little M and Sportsman series engine blocks.
( 4 )
$1.42
On Sale
Some engine swaps and racing applications do not need the heater, but elimination of the heater is difficult on the 7.3-liter Godzilla engine since the hose inlet and outlet passages are tough to plug and look like a cobbled up mess using traditional hoses, clamps, and plugs. Holley Ford 7.3L Godzilla rear block plug kits include a machined steel billet plug with O-ring seal, mounting bracket, and retaining bolt to block off the rear port with a professional look. Features: * Works with Holley's front/heater block-off kit to block all cooling ports * The plug is designed to handle high pressure and high temperatures--typical conditions of the cooling system * Easy installation without the need to tap holes or fabricate special plugs and caps * Steel plug features a clear zinc-plated finish
Not Yet Reviewed
$19.49
$10.72
Designed from a clean slate approach, Dart now offers the Iron Eagle Mopar Gen III cast iron bare blocks that address the shortcomings of the Hemi Gen III platform, and are the ideal candidate for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. By utilizing conventional style main caps with Gen III rotating assemblies and related components, Dart has addressed the windage and oil control problems, along with revising the cooling and oiling passages for improved flow. Non-VVT and VVT version offerings are available. Get everything you ever wanted out of your Gen III Hemi engine with the Iron Eagle Mopar Gen III cast iron bare blocks by Dart! Key features of Dart Iron Eagle Gen III Hemi cast iron engine blocks: * Manufactured from superior strength cast iron * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamese cylinder bores with extra thick walls * Extra-thick decks ensure reliable head gasket seal * Blind head bolt holes available in 7/16 in. standard or 1/2 in. upgrade * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.050 in. stroke with steel rods * Billet steel 4-bolt main caps 1-5, center 3 main caps splayed * Main studs standard * Gen III Hemi style motor mounts * Provisions for OE stock roller lifters and cam * Uses stock timing covers * All OE bolt holes for starter, water pump, etc. * Block can be machined for VVT or non-VVT camshafts * Parts kit included (32000050 for non-VVT, or 32000051 for VVT); note parts kits do not include cam bearings
Not Yet Reviewed
$5,499.99
On Sale
GFB offers a range of high-flowing external wastegates that are small—the most compact size in their class—but are big on flow! These external wastegates are built to cope with the extreme conditions and the harsh environment that's associated with high-boost and exhaust temperatures. Key features include: * Most compact wastegate range on the market for easy installation in tight locations * Body, valve, seat and all mounting hardware is CNC-machined from high-temp stainless steel * Actuator housing CNC-machined from billet 6061 aluminum * Nomex-reinforced silicone diaphragm * Internal shroud protects valve stem from excessive heat and prevents carbon-related sticking * V-band clamp mounting system * Made in Australia under ISO 9001
Not Yet Reviewed
$405.00
$364.50
On Sale
World Products Motown LS iron blocks feature significant updates that make them more user-friendly and versatile. They allow you to utilize affordable small block components like rotating assemblies, oil pans, distributors, and accessories, while taking advantage of the LS high-flowing cylinder heads. World Motown LS iron blocks are designed to provide a lighter, stronger foundation for a less expensive engine build with an easier install--no matter what you are putting it in. Features include: * Lighter than an OEM LS iron block * 9.240 in. LS deck height * Uses high-flowing LS cylinder heads * Standard SBC crankshafts, rods, and bearings * Use distributor or crank trigger ignition * LS EFI or carburetor intake * LS and SBC-style motor mounts * SBC-style oil pans and pumps * SBC-style oil filter pad * SBC bellhousing pattern * New design priority main oiling system ensures reliable lubrication of main bearing * Available with ductile or billet 4-bolt main caps
Not Yet Reviewed
$3,991.76
On Sale
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
$4,094.51
Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.
( 5 )
$4,140.75
TCI extra-long dowel pins are a must for any application running a mid-mount plate to ensure that the transmission bellhousing is properly aligned with the engine.
( 5 )
$31.95
When using a remote-mounted water pump, you have to make the connection to the block. The easiest way to do that is with Philadelphia Racing Products AN block adapters. They're CNC-machined from 6061 billet aluminum and anodized for protection and appearance. Each adapter is O-ringed for a tight seal and includes stainless hardware.
Not Yet Reviewed
$64.99
—
$79.99
Need to cover up your oil cooler outlet? ICT Billet offers an ideal solution with their oil cooler port delete plates. These aerospace-grade billet aluminum delete plates come complete with a reusable O-ring seal and stainless bolts.
( 41 )
$23.99
—
$37.99
Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.
( 2 )
$102.36
—
$204.74
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
