Availability
Summit Bucks
S&S Cycle offers MK-Series Performance crankcases for a variety of Harley-Davidson Touring and Softail street bikes from 2017 and up. These assembly replacements enable you to build massive power easily and reliably, particularly with M8 engines, and stock cases can't provide the necessary quality base. MK-Series crankcases are designed to allow for larger bores, scrape more oil than stock, have a larger volume sump, and fit in a stock frame without modification. Order the model recommended for your application.
Not Yet Reviewed
$2,499.95
—
$2,849.95
Summit Bucks
S&S Cycle Sportster cylinders are available as stock replacement for originals barrels which have reached their wear limit. The design, finish and workmanship of these cylinder replacements corresponds to the stock counterparts that they replace on various HD® models. These cylinders feature ductile cast-iron sleeves in aluminum castings and are available in silver or black wrinkle finishes to match your OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders in application designed for your specific Harley-Davidson® model.
Not Yet Reviewed
$652.95
—
$713.95
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,550.15
—
$5,565.20
Dart LS Next cast iron bare blocks integrate the robust heritage of a traditional Chevy small block with the performance potential of the late model LS engine architecture. The blocks are designed to rectify some of the former LS's more noticeable shortcomings on the bottom end—while still supporting high-flow and efficient cylinder heads developed for Gen III and IV platforms. They're available in multiple engine block styles, including stock/OEM standard deck and aftermarket. Dart LS Next blocks are back and better than ever! Highlight features of the LS Next cast iron bare blocks include: * Cast with premium cast iron alloy * Conventional style 4-bolt steel main caps * Full main webbing for maximum bottom-end strength * Extended cylinder barrels at the bottom to provide greater piston support for all combinations * Extra-thick Siamese cylinder bores * Blind head bolt holes don't go through into the water jacket * Provision for oil restrictors in the lifter valley * Revised low-restriction priority main oiling system * Pro-Stock/Pro-Mod big block style stepped main oil galley * External oil filter (must be used with stock or aftermarket oil pumps) * Dual starter mounts * Expanded water jacket on #1 cylinder for additional cooling capacity * LSX-style lifter bosses and dog bone provision are provided
Not Yet Reviewed
$3,999.99
—
$4,499.99
Use Dorman engine rear main seal covers to ensure the proper sealing of your engine, to stop and/or prevent engine oil leakage. They are made from high-quality materials and are available as direct replacements for a proper fit on various makes and models. Whatever your repair needs, Dorman has just what you're after!
( 10 )
$47.78
—
$291.95
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 162 )
$1.99
—
$30.99
Summit Racing™ LS Rear main seal housings are the correct housings for all LS models. These aluminum housings are ideal for replacing damaged housings and building a new project from scratch. Summit Racing™ LS rear main seal housings are designed for a correct fit and quality performance.
( 17 )
$50.99
Lakewood EZ-Adjustable bellhousing dowel pins are unique because they slip easily into the engine block and are designed to be turned with a wrench rather than a screwdriver. Once they're pointed in the correct direction, a set screw (which runs down the center) is then tightened, which prevents the dowel pin from turning. No need to pound the pins in and out—a no drilling or tapping is required! Order the model recommended for your vehicle and engine application.
( 29 )
$199.95
Stef's rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, one-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation.
( 2 )
$128.99
Dura-Bond timing cover dowels feature quality steel construction and install in your engine block where the timing cover mounting pad is. Speed up your installation with Dura-Bond timing cover dowels. To get the proper fit, form, and function your ride deserves, select the model for your application needs.
( 3 )
$4.99
Dura-Bond flywheel locating dowel pins are OEM replacements for your crankshaft. If your locating dowel has seen better days, why not install a new one while you're swapping the flywheel or flexplate on your vehicle? Order the model recommended for your application.
( 9 )
$6.99
Dial-in your bellhousing alignment to the engine block with Lakewood offset dowel pins. These adjustable pins can correct improper alignment. They're offered in a variety of offsets, lengths, and diameters for nearly a dozen makes, including Chevy, Oldsmobile, Pontiac, Buick, Ford, Lincoln, Mercury, and Mopar models. Stock pins for Ford and GM applications are also available. Lakewood bellhousing dowel pins are simple, affordable keys to aligning the transmission housing with your engine.
( 25 )
$48.61
—
$76.45
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 71 )
$4.99
—
$42.99
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$7.99
—
$44.99
Moroso rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, 1-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation. The adapter kits include all mounting fasteners and required hardware.
( 8 )
$232.99
—
$252.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
If you've dressed up your engine but there's just something missing, add some style in an unlikely place with a finned cast aluminum valley pan cover from Top Street Performance. The lightweight covers are available in a choice of black and polished finishes. Order the model for your application. Notes: Will fit LS1 and LS6 engines. No knock sensor or displacement on demand provisions.
Not Yet Reviewed
$74.06
—
$86.42
Cummins by Mopar offers expansion plugs for hundreds of Dodge and Ram diesel engine applications from 1989 and up. They're manufactured from premium materials in different styles for an OE fit and factory performance. The freeze plugs help to prevent leaks. Order the model recommended for your vehicle.
Not Yet Reviewed
$11.99
—
$42.99
Clearance
L.A. Sleeve cylinder sleeves continue to be the solution for many riders, racers, and engine builders everywhere as an inexpensive way to reinvigorate your engine without having to resort to new cylinder replacement. The sleeves are manufactured from centrifugally-spun moly 2000 iron alloy castings, which ensures an easier installation and trouble-free boring (inside diameter must be bored and honed after install). And, by re-sleeving your engine's worn or seized cylinders during a rebuild, you'll save serious money while also enjoying a more dependable and long-lasting engine. The sleeves are available in nearly a hundred bore sizes; order the model recommended for your powersports application.
Not Yet Reviewed
$113.99
$59.50
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
—
$4,736.26
Mahle Original cast iron cylinder sleeves are available for a variety of bore sizes—and are ideal replacement parts for repairing your damaged cylinders. Mahle is the choice of champions; order the model with specs designed to fit your application.
Not Yet Reviewed
$207.99
—
$221.99
Summit Bucks
On top of being constructed from superior materials, S&S Cycle's Evolution cylinders have thicker castings, larger cooling fins, and better wear resistance than stock cylinders. The design, finish and workmanship of these replacements corresponds to the stock counterparts that they replace. The cylinders feature ductile cast-iron sleeves in aluminum castings and are available in natural or black powdercoat finish to match OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders designed to fit your specific Harley-Davidson® model.
Not Yet Reviewed
$815.95
—
$877.95
These Chevrolet Performance 350 c.i.d. cast iron racing Bowtie bare engine blocks are CNC-machined from raw castings. All traditional racing modifications are provided by the factory. The heart of these blocks starts with a 3.980-4.155 in. Siamese bore cylinder case. In addition, all galleries required for dry sump oil system operation are drilled and tapped for pipe. 8620 steel bearing caps are installed on all locations of the blocks. The intermediate main bearing caps have the outer 7/16 in. diameter studs on the inner locations, and 3/8 in. diameter straight bolts on the outer locations. The rear bearing cap is a 2-stud (7/16 in. diameter) configuration and utilizes a 2-piece rear seal design. After the installation of the steel bearing caps, the blocks are align bored. Additional features include: * Priority main oiling * Enlarged lifter bosses * Bearing cap inner bolts spread .210 in. to allow use of 2.65 in. diameter journal cranks on properly modified blocks * Early model 2-piece rear main seals * Sonic bore check (data provided) * Use 1985 and earlier oil pans * Enlarged cam bosses in front and rear allow use of larger bearings * Use premium quality studs and 8620 200 steel splayed main bearing caps
Not Yet Reviewed
$3,053.72
—
$3,441.12
Chevrolet Performance offers a variety of LS bare engine blocks to suit your needs. These Chevrolet Performance LS series cylinder blocks are specifically designed for late model small block engines that run the LS family of cylinder heads. These include the LS1, LS2, LS3, LS6, LS7, LQ4, LQ9, L76, and L92. Their LS block selection ranges from a stock replacement all the way up to Chevrolet Performance's LSX Bowtie block designed to support over 2,000 hp!
Not Yet Reviewed
$2,660.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
