Engine Blocks & Parts | Summit Racing

Summit Racing™ LS Main Cap Bolt Kits

Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.

4.63 out of 5 stars ( 16 )

$41.99

—

$149.99

Edelbrock LS Bare Race Blocks

Edelbrock LS bare race blocks are designed to meet the needs of today's high performance engine builders and racing enthusiasts. They are available in standard and tall deck height combinations and are engineered for maximum clearance around a 4.600 in. stroke crankshaft. With their unique design, Edelbrock engineers were able to minimize windage in the rotating assembly, leading to superior engine lubrication at higher rpm. To make them friendly for existing race applications, these blocks contain both factory and motor plate race mounts for Gen I, II, III, and IV engines. Each LS bare race block receives a CT scan to ensure maximum performance and consistency. Standard features include: * Designed from aircraft-quality A357 T-6 aluminum * Siamese cast bore walls (4.125 in. or 4.165 in. diameter) with press-in cast iron sleeves * Machined with 55mm cam bearing journal * Available in standard (9.240 in.) and tall (9.750 in.) deck heights with beefy deck thicknesses (.500 in. standard/.750 in. tall deck); standard (5.87 in.) and tall (6.38 in.) deck cylinder sleeves are available * 6-head bolt design with full water jacket around cylinder walls; large windows in the valley allow access to an inboard 6th head bolt * Block design includes large front and rear -12AN side feeds for serious dry sump setups * Material for oversized lifters with lifter bosses are designed to clear tie bar-style lifters

Not Yet Reviewed

$6,904.95

Dart SHP Special High Performance LS Next Pro Cast Iron Bare Blocks

Dart SHP Special High Performance LS Next Pro cast iron bare blocks continue the evolution of their LS Next platform with superior strength. With full skirt designs, priority oiling systems, and other excellent features, these SHP LS Next Pro blocks are the perfect upgrades for your factory LS blocks, as well as ideal starting points for drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts. Dart SHP LS Next Pro cast iron bare blocks feature: * Superior strength 220 BHN cast iron * Steel 4-bolt main caps with upgraded ARP main studs * Lifter oil crossover with restrictor provision * 6-bolt per cylinder capability * 4.000 in. up to 4.185 in. bore * Factory oil filter provision * 8-counterweight machining * Full skirt design * Priority main oiling * Siamese cylinder bores * Thick decks ensure reliable head gasket seal

5.0 out of 5 stars ( 1 )

$4,699.99

Dart LS Next Cast Iron Bare Blocks

Dart LS Next cast iron bare blocks integrate the robust heritage of a traditional Chevy small block with the performance potential of the late model LS engine architecture. The blocks are designed to rectify some of the former LS's more noticeable shortcomings on the bottom end—while still supporting high-flow and efficient cylinder heads developed for Gen III and IV platforms. They're available in multiple engine block styles, including stock/OEM standard deck and aftermarket. Dart LS Next blocks are back and better than ever! Highlight features of the LS Next cast iron bare blocks include: * Cast with premium cast iron alloy * Conventional style 4-bolt steel main caps * Full main webbing for maximum bottom-end strength * Extended cylinder barrels at the bottom to provide greater piston support for all combinations * Extra-thick Siamese cylinder bores * Blind head bolt holes don't go through into the water jacket * Provision for oil restrictors in the lifter valley * Revised low-restriction priority main oiling system * Pro-Stock/Pro-Mod big block style stepped main oil galley * External oil filter (must be used with stock or aftermarket oil pumps) * Dual starter mounts * Expanded water jacket on #1 cylinder for additional cooling capacity * LSX-style lifter bosses and dog bone provision are provided

Not Yet Reviewed

$3,999.99

—

$4,499.99

Summit Racing™ LS Rear Main Seal Housings

Summit Racing™ LS Rear main seal housings are the correct housings for all LS models. These aluminum housings are ideal for replacing damaged housings and building a new project from scratch. Summit Racing™ LS rear main seal housings are designed for a correct fit and quality performance.

2.35 out of 5 stars ( 17 )

$52.99

ICT Billet LS Lifter Valley Covers

Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.

4.56 out of 5 stars ( 71 )

$109.99

Derale LS Engine Oil Cooler Adapter Kits

Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.

4.5 out of 5 stars ( 2 )

$102.36

—

$204.74

Holley LS Valley Covers

Holley LS valley covers are the latest accessories offered for the GM LS engine platform. These covers install between the two banks of cylinder heads, depending on your usage of knock sensors, displacement on demand, and active fuel management. They're available in a cast aluminum finned design to match Holley's popular valve covers, as well as a billet aluminum trussed version for a race-inspired look. The valley pan covers are offered in a variety of finishes.

5.0 out of 5 stars ( 2 )

$279.95

—

$306.95

Billet Specialties LS Valley Covers

Billet Specialties LS valley covers are engineered to fit LS2, LS3, LS7, and LSX blocks when using a carbureted intake manifold. They feature a ribbed design and are precision-machined from 6061 T6 aluminum and polished to a mirror finish to match other ribbed accessories. The covers include high-quality ARP 12-point hardware for the perfect finishing detail. The valley covers feature a provision machined into the back for the factory breather box and two 1/8 in. NPT ports for use with external breathers, oil separators, or catch cans. Designed for use with an OEM factory gasket (not included).

Not Yet Reviewed

$104.36

—

$229.95

Summit Racing™ LS Cylinder Head Dowel Pins

Dowel pins are an often overlooked item when performing a rebuild or upgrading cylinder heads. Our Summit Racing™ cylinder head dowel pin kits will keep gaskets in position and properly align cylinder heads to your engine block.

Not Yet Reviewed

$17.99

Summit Racing™ LS Finned Aluminum Valley Covers

The final detail to enhance the appeal of your LS engine--Summit Racing™ LS finned aluminum valley covers. Fabricated from aluminum, they are available with a natural or polished finish, or black powdercoated with machined fin tops for great contrast and looks. The material, finishes, and classic fin design of our Summit® LS intake valley plates offer the ideal touch to dress up your engine area.

5.0 out of 5 stars ( 1 )

$60.99

—

$65.99

Derale LS Engine Oil Cooler Block-off Adapters

Derale LS engine oil cooler block-off adapters can replace your stock GM adapter in order to furnish more 1/8 in. NPT ports. The two extra ports can be used for additional accessories and/or sensors. These block-off adapters are designed with an ultra-low profile to clear most header applications, and can withstand up to 200 psi.

Not Yet Reviewed

$64.35

Dart LS Next Block Hardware Kits

Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.

Not Yet Reviewed

$172.99

—

$185.99

Summit Racing Equipment® LS Engine Hardware Kits

Whether you're looking for more power or simply trying to refresh the motor, there will come a time when you'll need Summit Racing Equipment® LS engine hardware kits. These kits include brass freeze plugs and main cap side bolts for your LS engines. Your rebuilt engine will not be complete without Summit Racing Equipment® LS engine hardware kits.

5.0 out of 5 stars ( 2 )

$57.78

World Products Motown LS Water Return Kits

World Products Motown LS water return kits consist of quality components needed to plumb your Motown LS block for cool performance. They include a 6061 T-6 billet aluminum Moroso thermostat housing, and PBM Performance red/blue anodized aluminum fittings with either their Pro-Lok blue rubber or Pro-Flo stainless steel braided hose.

Not Yet Reviewed

$351.10

—

$397.13

Dart LS Next Aluminum Bare Blocks

Dart LS Next aluminum bare blocks are designed from a clean slate approach. They integrate the robust heritage of a traditional Chevy small block with the performance potential of the late model LS engine architecture. By utilizing conventional style main caps and oil pans with LS rotating assemblies and related components, Dart has addressed the LS engine's more noticeable shortcomings on the bottom end—while still supporting high-flow and efficient cylinder heads developed for both the Gen III and IV platforms. Dart LS Next aluminum bare blocks are a real game-changer! Highlight features of the LS Next aluminum bare blocks are: * Cast from premium aluminum alloy * One-piece rear main seal design * Conventional style 4-bolt steel main caps * Available in deck heights from 9.240 in., 9.450 in., and up to 9.800 in. * Extra-thick decks ensure reliable head gasket seal * Blind head holes available in 7/16 in. or 1/2 in. * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.100 in. stroke with steel rods * Must be clearanced for fully counterweighted crankshafts * Splayed outer bolts on middle main bearing caps * Provisions for OE stock roller lifters and cam * Uses stock timing covers and stock rear cover * All OE holes for starter water pump, etc. * Skirted and non-skirted design available * Driver or passenger side starter mounts (not available on skirted version)

Not Yet Reviewed

$7,249.99

Chevrolet Performance LS Bare Engine Blocks

Chevrolet Performance offers a variety of LS bare engine blocks to suit your needs. These Chevrolet Performance LS series cylinder blocks are specifically designed for late model small block engines that run the LS family of cylinder heads. These include the LS1, LS2, LS3, LS6, LS7, LQ4, LQ9, L76, and L92. Their LS block selection ranges from a stock replacement all the way up to Chevrolet Performance's LSX Bowtie block designed to support over 2,000 hp!

Not Yet Reviewed

$2,660.26

Dart LS Next2 Cast Iron Bare Blocks

Dart's LS Next2 cast iron bare engine block can elevate your LS Next platform with 9.240/9.450 deck heights, 4.000/4.125 bores, and billet steel main caps. Unleash unmatched strength with 1/2 in. main studs and compatibility for 8CW crankshafts and 1/2 in. head studs. Blocks come machined to accept fully counterweighted crankshafts. Additional details and specs: * Larger 4-bolt billet steel main caps * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamesed cylinder bores with extra thick walls * Cylinder barrels extended .375 in. at the bottom * Extra thick decks ensure reliable head gasket seal * Blind 1/2' head bolt holes * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.100 in. stroke with steel rods * Clearanced for center counterweighted crankshafts * 1/2 in. main studs, with 4 splayed outer bolts on middle main bearing caps * LS style motor mounts * Provisions for OE stock roller lifter and cam * Uses stock timing covers and stock rear cover * All OE bolt holes for starter, water pump, etc. * Driver or passenger side starter mounts * Camshaft location: Standard * Freeze plug type: Brass press-in * Camshaft lifter bore: 0.842 IN * Main bearing type: Chevrolet LS * Main cap type: 4-bolt * Rear main seal type: LS * Engine type: ICE

Not Yet Reviewed

$5,449.99

Engine Works LS Main Cap Bolt Kits

Engine Works LS main cap bolt kits offer a complete set of bolts for one engine. Each kit includes outer main cap studs, inner main cap bolts, and side main cap bolts.

Not Yet Reviewed

$87.46

World Products SBC Motown LS Bare Blocks

A strong foundation—World Products SBC Motown LS bare blocks offer the groundwork to fortify your performance build. These iron blocks allow you to employ high-flowing LS-style heads and manifold, as well as expensive, already-purchased pulley kits and external accessories. Plus, the block has a coolant capacity in excess of 150 fluid oz. for superior cooling. Begin with solid strength … and finish with winning performance; start with a World Products SBC Motown LS bare block.

5.0 out of 5 stars ( 1 )

$4,736.26

World Products Motown LS Iron Blocks

World Products Motown LS iron blocks feature significant updates that make them more user-friendly and versatile. They allow you to utilize affordable small block components like rotating assemblies, oil pans, distributors, and accessories, while taking advantage of the LS high-flowing cylinder heads. World Motown LS iron blocks are designed to provide a lighter, stronger foundation for a less expensive engine build with an easier install--no matter what you are putting it in. Features include: * Lighter than an OEM LS iron block * 9.240 in. LS deck height * Uses high-flowing LS cylinder heads * Standard SBC crankshafts, rods, and bearings * Use distributor or crank trigger ignition * LS EFI or carburetor intake * LS and SBC-style motor mounts * SBC-style oil pans and pumps * SBC-style oil filter pad * SBC bellhousing pattern * New design priority main oiling system ensures reliable lubrication of main bearing * Available with ductile or billet 4-bolt main caps

Not Yet Reviewed

$3,991.76

—

$4,736.26

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

5.0 out of 5 stars ( 11 )

$2,249.99

—

$3,399.99

Fleece Performance Freedom Series LTR Aluminum Engine Blocks

Fleece Performance Freedom Series LTR is a premium aluminum Gen V LT standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LTR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LT accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- Minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LTR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

Improved Racing Engine Block Oil Galley Barbell Plugs

Improved Racing's engine block oil galley barbell plugs feature a second O-ring that completely seals off the dirty oil from the clean oil, forcing 100 percent of the flow through the filter. Sharp corners were avoided and machined as smooth fillets to improve oil flow, while the bull nose tip helps smooth oil flow to the oil filter. The shaft diameter is smaller than the OEM plastic barbell to minimize flow restriction, and the threaded hole allows for easy removal with any 4mm x 0.7 threaded screw. Please refer to the Applications tab when ordering to confirm the fitment. Features of Improved Racing's barbell plugs include: * Direct replacement for plastic OEM barbell plug * Precision CNC-machined from billet 6061-T6 aluminum * Viton® rubber O-rings offer high-temperature resistance and excellent chemical compatibility with engine oils

5.0 out of 5 stars ( 19 )

$26.90