Engine Blocks & Parts | Summit Racing

S&S Cycle 97 in. Big Bore Kits

S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required

Not Yet Reviewed

$1,249.95

S&S Cycle 4 in. Sidewinder Big Bore Kits

Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish

Not Yet Reviewed

$1,550.95

Dorman Expansion Plugs

Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.

4.59 out of 5 stars ( 75 )

$9.99

—

$16.99

Cylinder Works Cylinders

Cylinder Works cylinders are your powersports alternative to OEM or re-plating. These standard bore cylinders are brand new—not remanufactured or replaced—and are nickel silicon carbide-plated cast aluminum to provide long life. They're precision-honed to the exact size to make your piston installation easier. Cylinder Works offers dirt bike and ATV enthusiasts quick and affordable access to direct fit replacement cylinders. Order the bore size recommended for your application.

Not Yet Reviewed

$559.50

—

$591.81

Fleece Performance Freedom Series LTR Aluminum Engine Blocks

Fleece Performance Freedom Series LTR is a premium aluminum Gen V LT standard deck race block designed for high performance applications. Cast from a proprietary 356 T-6 aluminum ingot, the Freedom Series LTR engine blocks are engineered with precision and designed for durability to deliver unmatched strength and compatibility with OEM LT accessories. Reinforced from top to bottom, the blocks are built for maximum performance with added features, like cross bracing in the lifter valley, maximized crankshaft saddle radius, and a 40 percent larger footprint for the main cap contact surface to the skirt wall. Whether you're upgrading for competitive racing or seeking peak performance, the Fleece Performance Freedom Series of engine blocks ensure reliability and excellence in every detail, making them a perfect choice for serious enthusiasts and professionals alike. Features: * Cross-braced lifter valley: -- Provides added structural integrity and individual drain backs for improved reliability * Heavy-duty deck thickness: -- A robust 0.750 in. deck thickness for enhanced durability * Enhanced design: -- Additional stock to the front and rear valley walls for increased strength -- Minimum 0.625 in. skirt wall thickness -- Complete reinforced exoskeleton combined with Hot Isostatic Pressing (HIP) ensures the highest quality casting available * Billet main caps: -- Billet construction ensures stability and precision fitment -- Utilizes 8740 alloy M10 main studs and side bolts along with dowels on the inner studs of the block for superior clamping and reliability -- Exclusive domed main cap design provides maximum crankshaft support * Maximized crankshaft saddle radius: -- Optimized for performance under high-stress conditions * Lightweight: -- Weighs only 120 lbs. with main caps -- Strong yet lightweight solution * Priority oil system: -- Oil rifling provides priority oil feed to critical bottom-end components -- Reduces heat, wear, and risk of failure * Ductile iron sleeves: -- Durable wear-resistant surface with improved shock absorption Engine block is shipped with: * Durabond GMP-9 cam bearings * LTR rear cover, rear cover gasket, and hardware * Plug kit * Precision ground 1018/1020 steel cam thrust plate * Transmission dowel pins * Oil galley barbell plug * Rear main seal

Not Yet Reviewed

$6,750.00

Moroso Fuel Pump Pushrods

Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.

5.0 out of 5 stars ( 9 )

$36.99

Go Fast Bits DV Plus Diverter Valves with TMS Advantage

Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost

5.0 out of 5 stars ( 6 )

$173.70

Gator Fasteners Main Stud Kits

Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.

3.0 out of 5 stars ( 1 )

$224.99

—

$414.99

Howards Cams Extreme Billet Main Caps

Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.

4.14 out of 5 stars ( 14 )

$89.99

—

$271.99

Howards Cams Main Cap Support Straps

If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.

Not Yet Reviewed

$26.99

—

$64.99

World Products Main Caps

World Products main caps are precision CNC-machined from superior-quality 1050 billet steel or ductile iron and are proudly 100 percent manufactured in the USA. The main caps are designed to provide maximum stability, strength, and balance. Front and rear caps are also available. Use these caps together for the ultimate in bottom-end stress and flex management.

Not Yet Reviewed

$112.98