Availability
Showing In Stock Items. Show All 20 Items.
Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.
( 8 )
$126.99
—
$188.99
Summit Bucks
ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.
( 15 )
$3.99
Canton Racing SBC rear main seal adapters convert your 1986 and later blocks with one-piece rear main seals to accept an older style 2-piece seal crankshaft. These adapters are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. When using these adapters, an oil pan for a 1985 and earlier block with a right side dipstick must be used. They are made from billet aluminum and hardware is included.
Not Yet Reviewed
$225.00
Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.
( 5 )
$4,140.75
S&S Cycle 97 in. big bore kits will increase the displacement of 88 in. engines to 97 in., are easy to install, and require no machining or re-balancing. Using an 11-fin design, these pre-finished cylinders closely resemble the OEM shape and are ready to install. Order an S&S Cycle 97 in. big bore kit—and take your stock engine case as big as it'll go! Features of the S&S Cycle 97 in. big bore kits: * The 97 in. big bore kits for 88 in. motors yield excellent results with stock cylinder heads * Feature the same silver or black wrinkle powder-coat as stock, so they match the stock finish of the engine * Specifications: 3.927 in. bore, 4 in. stroke, 97 in. displacement, and 9.7:1 compression ratio with stock heads (9.3:1 compression ratio with S&S 89cc heads or 10.7:1 with S&S 79cc heads) * Feature the largest bore (3.927 in.) that can safely be used in a cylinder with stock spigot diameter * Included S&S cylinders feature a much stronger cast iron liner to stand up to the added power * Easy installation: no need to bore or split existing cases, just swap the cylinders *Kit includes cylinders, pistons, rings and gaskets (head, base and exhaust) * For best performance, appropriate camshafts, performance air cleaner, performance exhaust and fuel system tuning is required
Not Yet Reviewed
$1,249.95
S&S Cycle Super Stock alternator-style crankcases are perfect for stock replacement and high performance applications. Available in stock and different bore sizes, some are machined for the installation of a crank position sensor, but all are compatible with stock flywheel assemblies, primary covers, gear covers, and are clearanced for 38 amp alternator stators. Certain options may include the required hardware, fittings, and bearings, and may be offered in different finishes. Select the S&S Super Stock alternator-style crankcase designed for your motorcycle's engine.
Not Yet Reviewed
$1,617.95
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$3,345.95
HardDrive cylinders are offered as a stock replacement as well as increased displacement (depends upon application) for applications as early as Panhead all the way up to Evolution and Sportster. All cylinders must be finish honed and matched to pistons (sold separately).
Not Yet Reviewed
$221.36
Twin Power offers OEM replacement cylinders for your motorcycle. Each Twin Power cylinder is designed to meet or exceed OEM specifications. These cylinders are available in a black or natural finish. Cylinder material and liner material vary depending on the application. Twin Power cylinders are the quality replacement your motorcycle deserves to keep it running like new.
Not Yet Reviewed
$354.04
PRW billet steel main caps raise the bar in the high performance industry. The main caps are precision-machined from high strength steel, which offers both the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. These main caps stabilize the entire crankshaft rotating assembly in your high-performance engine by eliminating annoying cap walk, and reducing main bearing bore distortion. With a combination of top-quality performance components and reasonable pricing, we know that when you receive your new PRW billet steel main caps, you will have no trouble seeing what the excitement is all about!
( 3 )
$292.38
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$235.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
