Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Engine Blocks & Parts
ARP Main Stud Kits
ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much stronger threads than the competition. Kits come complete with hardened parallel-ground washers and high-quality nuts. Add confidence in the strength of your engine build with the ARP main stud kit designed for your application.
( 394 )
$34.99
—
$376.99
Moroso Main Cap Girdles for Ford
Moroso main cap girdles for Ford are designed to fit 289-302 c.i.d. engines using a 2-bolt main block. They are manufactured from 1/2 in. thick steel and can fit over main caps without the need for additional spacers. The girdles include all necessary mounting hardware and will fit standard high-volume oil pumps.
( 10 )
$334.99
Summit Racing™ Main Bolt Kits
Make sure your crankshaft is secured properly using a set of these Summit Racing™ main bolt kits. They include high-tensile strength bolts that deliver maximum reliability where you need it the most. The bolt kits are designed for use with stock or aftermarket main caps, and can be installed without any modifications.
( 10 )
$209.70
PRW Billet Steel Main Girdles
PRW billet steel main girdles help eliminate the block flex and cap walk that occurs as a result of stress while under extreme loads, or during nitrous oxide power bursts in high performance engines. PRW main stud girdles are manufactured from premium quality 1045 billet steel, and include high-quality PRW fasteners and hardware. Select the girdle designed for your vehicle's engine.
( 2 )
$174.59
—
$252.72
Milodon Main Caps
Milodon aftermarket main bearing caps not only strengthen factory 2-bolt blocks, but they will also add a measurable degree of strength to 4-bolt blocks. They are made from precision-machined, high-strength steel, which has the proper balance of strength and flexibility to allow for the transfer of increased shock loads to the crank and bearings. The secret is in the side bolts. They are angled so that they pull from the side walls of the block and not from the flimsy main web area. They'll also load the cap against the register step, which will prevent dreaded "cap walk." They can be installed by anyone with a hand drill and a tap and they come with the necessary bolts, washers, and drill bushing to complete the installation. Milodon main cap kits are available in your choice of angled or straight bolts.
( 20 )
$119.95
—
$679.95
ACDelco GM Genuine Parts Engine Oil Fill Caps
ACDelco GM Genuine Parts engine oil fill caps provide the perfect OE replacements without breaking your budget. They are designed, engineered, and tested to rigorous standards, and are backed by General Motors. Choose the cap style designed for fitment on your particular engine block.
( 14 )
$21.99
ARP High Performance Series Main Bolts
ARP High Performance Series main bolts are rated at 180,000 psi and a popular premium replacement for OEM fasteners. Designed to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 179 )
$33.99
—
$414.99
BTR Main Cap Fasteners
Brian Tooley Racing offers main cap fasteners for a variety of Chevy small block engine applications from 1997 and up. These bolts are used to secure the main bearing caps to ensure proper operation of the crankshaft. The fasteners are stock replacement bolts for Gen III and Gen IV LS engines, available with or without a windage tray provision.
Not Yet Reviewed
$3.99
Howards Cams Main Cap Support Straps
If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.
Not Yet Reviewed
$26.99
—
$64.99
Howards Cams Extreme Billet Main Caps
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$89.99
—
$312.99
Crown Automotive Main Cap Fasteners
Crown Automotive main cap fasteners are durable steel construction. The components in your engine are only as strong as the fasteners holding them together. Some of the most stressed-out parts of an engine are the relatively inexpensive nuts and bolts that hold it all together. Crown Automotive offers a selection of high-quality fastener parts for replacement of snapped or worn parts. Order the main cap fasteners designed for your engine application.
( 1 )
$3.99
Edelbrock Main Cap Dowel Pins
Edelbrock offers main cap dowel pins for a variety of LS-based engine applications. The pins are designed to locate the main caps to the block on an RHS race engine.
Not Yet Reviewed
$9.95
PRW Main Cap Stud Kits
PRW main cap stud kits help eliminate main cap walk and also protect the threads in your engine block. The main cap studs work with the main caps to help strengthen the foundation for your next high horsepower build. These main cap fasteners come complete with hardened parallel-ground washers and quality hex-style nuts. Add confidence in the strength of your engine build when you use these PRW main cap stud kits.
( 6 )
$69.13
—
$384.75
Edelbrock Main Cap Washers
Edelbrock offers main cap washers for engine block and cylinder head applications. These hardware components come standard with the purchase of Edelbrock race blocks, but are also available separately as replacements for worn or damaged originals.
Not Yet Reviewed
$4.95
—
$8.95
Milodon Main Stud Kits
Milodon main stud kits are required where maximum gasket loading and minimal wear and tear are exerted on the block threads. These engine studs are premium-grade, race-quality studs that are created from aircraft-quality 8740 chromoly steel right in Milodon's own plant. They are ground and thread-rolled after heat treatment to ensure the exacting tolerances that Milodon requires for all of their fasteners. This ensures strength and consistent torque readings. The tensile strength of these premium fasteners is 190,000 psi, which is more than adequate for the most demanding applications. All kits come complete with 4130 heat-treated, parallel-ground washers and high-strength nuts.
( 20 )
$74.95
—
$262.95
PRW Billet Steel Main Caps
PRW billet steel main caps raise the bar in the high performance industry. The main caps are precision-machined from high strength steel, which offers both the proper balance of strength and flexibility to allow transfer of increased shock loads to the crank and bearings. These main caps stabilize the entire crankshaft rotating assembly in your high-performance engine by eliminating annoying cap walk, and reducing main bearing bore distortion. With a combination of top-quality performance components and reasonable pricing, we know that when you receive your new PRW billet steel main caps, you will have no trouble seeing what the excitement is all about!
( 3 )
$207.03
—
$341.77
Milodon Main Bolt Kits
Milodon premium-grade bolts are forged from 8740 chromoly steel. They are ground and thread-rolled after heat-treatment to ensure exacting tolerances. These bolts feature a 1/2 in. hex head for greater socket clearance, a wide flange area under the head for greater load spread, and a black oxide finish.
Not Yet Reviewed
$234.95
Gator Fasteners Main Stud Kits
Gator Fasteners main stud kits are designed for stock to performance built engines. When building a high horsepower Cummins engine, the factory main bolts can only handle so much power. Factory bolts can stretch and unfortunately cause what's called main cap walk or loss of torque. Both these conditions can contribute to major engine issues. These heavy-duty main studs eliminate these issues and add strength to the bottom end of your engine. When it comes to reliable engine assembly, don't get caught with sub-par parts. Gator studs are what you need! Each stud has rolled threads and is constructed from 8740 steel with an added proprietary element for the ultimate in durability and high-tensile strength. Order the Gator stud kit designed for your application.
( 1 )
$224.99
—
$414.99
World Products Main Caps
World Products main caps are precision CNC-machined from superior-quality 1050 billet steel or ductile iron and are proudly 100 percent manufactured in the USA. The main caps are designed to provide maximum stability, strength, and balance. Front and rear caps are also available. Use these caps together for the ultimate in bottom-end stress and flex management.
Not Yet Reviewed
$112.98
—
$282.46
Dart SHP Special High Performance Individual Main Caps
Dart SHP Special High Performance individual main caps are designed to provide maximum stability, strength, and balance. Chosen by racers all over the world, Dart SHP Special High Performance main caps are constructed from durable materials to offer the utmost in quality and reliable performance.
Not Yet Reviewed
$61.99
—
$182.99
World Products Main Stud Kits
World Products engine block main studs are made from 8740 chromoly steel and have a 190,000 psi tensile strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete with hardened washers and high-strength nuts.
Not Yet Reviewed
$187.34
ARP Pro Series Main Bolts
ARP Pro Series main bolts are application-specific and rated at 190,000 psi. Designed for use in competition engines, as well as to meet the exacting standards and demands of professional engine builders, ARP bolts are forged from 8740 chromoly steel and feature a reduced wrenching head, large underhead radius, and rolled threads for the utmost in reliability. The threads are rolled after heat-treating which gives them about 2,000 percent better fatigue strength than most main bolts that are threaded prior to heat-treating. Hardened parallel-ground washers are included with each kit.
( 15 )
$45.99
—
$372.99
Wagner Tuning Pro Series Main Stud Kits
Wagner Tuning Pro Series main stud kits are must-haves for all engines that run with increased boost pressures. They replace the original main bearing bolts with high-strength Pro Series 18.8 stud bolts with a tensile strength of 1850 N/mm², and they do not need to be replaced after disassembly, but can be reused. Pro Series bolt threads are formed and not cut as is customary in the trade. By rolling the threads, the strength of the tooth flanks can be increased by around 30 percent. All Pro-Series products are supplied with a nickel coating or a burnished finish and are therefore protected against corrosion in the long term, even under the toughest conditions. Pro Series stud bolts have a hexagon socket drive on the head side for screwing in the stud bolts. Thanks to a cone on the engine block side of the stud, these are not supported on the thread flanks when the nuts are tightened, but in the bore of the thread in the engine block. This support protects the threads during frequent assembly of racing engines. Nuts and washers are included in each set, and they also have a tensile strength of 1850 N/mm². Select the kit designed for your vehicle in the finish you prefer best.
Not Yet Reviewed
$299.00
—
$749.00
Summit Racing™ LS Main Cap Bolt Kits
Rebuilding your GM LS engine? Replace those old main cap bolts with our Summit Racing™ LS main cap bolt kits for peace of mind. Our kit includes all 30 bolts to get the job done. They meet the same high-quality and specifications as your factory bolts.
( 16 )
$41.99
—
$149.99
