Availability
Showing In Stock Items. Show All 82 Items.
ICT Billet camshaft thrust retainer plate bolts are high-quality replacements for your stock fasteners. If you're doing an engine rebuild, cam swap project, or maybe misplaced your stock bolts—why not upgrade with a premium set of camshaft thrust retainer plate fasteners from ICT Billet?
( 3 )
$25.99
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$18.95
—
$54.95
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$89.99
—
$285.99
COMP Cams have put together their engine plug kits because they understand it's easy to forget the little things. Ordering this one part number will supply you with all the plugs needed to seal the water and oil chambers in your LS engine. The plugs are made from brass and galvanized steel to resist corrosion, and will last for years without rusting or becoming stuck in your engine block. When building an LS engine, your primary focus is the major components—camshafts, cylinder heads, and like power makers. You don't want to overlooked the smaller, but also important, parts to complete your build. COMP Cams hasn't; pick up one of these engine plug kits and be ready to finish what you've started.
( 2 )
$49.95
If you're running big horsepower, then you may need extra support for your front and rear main caps. Stabilize and strengthen your OEM-style main caps for big power with Howards Cams main cap support straps. These steel straps will help to counter the problems of bottom-end stress and flex management.
Not Yet Reviewed
$26.99
—
$64.99
Ford Performance Parts cam cover ball stud kits allow for a coil cover attachment on all 2011-17 5.0 4 V F-150 Coyote engines. These steel hex head/ball stud-style fasteners are OEM quality and consist of six ball studs per kit. One kit is required per engine. Washers are not included (sold separately).
( 2 )
$23.99
Clearance
Available in keyed and non-keyed styles, Isky lifter bore bushings are precision made from a special bronze alloy that lasts 2 to 4 times longer than most others. They also prevent excessive scuffing of roller lifter bodies. Isky keyed-style lifter bore bushings are for keyway roller lifters. Select the correct size for your engine and lifters.
Not Yet Reviewed
$605.99
$420.50
Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.
Not Yet Reviewed
$172.88
—
$185.86
Lightweight Moroso fuel pump pushrods feature hardened ends to reduce reciprocating mass, which prevents pump arm float and subsequent fuel starvation. They're ideal for use in drag, Oval Track, and street performance applications.
( 9 )
$36.99
World Products has made improvements to virtually every area of the new Merlin IV engine blocks—with the goal of producing the most technologically advanced and best-performing iron BBC block available today! New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310 in. @ 4.600 in. bore. In addition to the standard BBC 9.800 in. and 10.200 in. deck heights, new heights measuring 9.500 in., 9.850 in. and 10.250 in. are now available. The World Products Merlin IV engine blocks are also available with a 2.120 in. BBC cam journal and standard .842 in. lifter bores, or with a 2.283 in. journal for a 55mm Babbitt cam and .904 in. lifter bores. World Products has added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the blocks.
( 3 )
$3,842.02
—
$5,173.48
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$3,011.36
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 165 )
$10.99
—
$24.99
The engine tear down and cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Dura-Bond offers many of the hard-to-find OEM service parts you need. All hardware is manufactured to precise OEM dimensions for exact fit.
( 74 )
$10.99
—
$35.99
Pioneer offers quality new cylinder head dowel pins at an affordable price. These dowel pins are great to have on hand when you do machine work on your block. Pioneer cylinder head dowel pins are made with first-rate materials and are available in a choice of sizes for accurate cylinder head alignment.
( 57 )
$12.99
Melling engine expansion plug kits come with everything needed to replace the leaky "freeze" plugs on your current engine. When you have the motor out of the chassis, it's the ideal time to update the plugs before they start leaking. Order the kit recommended for your application—and stay ahead of the game with Melling!
( 12 )
$10.99
Durable steel freeze plugs from Dart work like expansion plugs. As we all know, water expands when it turns to ice, and if the coolant in your vehicle doesn't have enough antifreeze protection, it can freeze and then crack the engine block. Dart freeze plugs are designed to pop out under such conditions to relieve the pressure on the block, thus protecting it against freeze damage.
( 11 )
$1.19
—
$1.71
Save time and money with Engine Works engine finishing kits. During an engine tear down and the cleaning process can lead to broken, bent, distorted, or lost service parts. These items can be troubling to any engine re-builder, especially when they are difficult to obtain. That is why Engine Works offers many of the hard-to-find OEM service parts you need in each engine hardware finishing kit. Available for small and big block Chevrolet and small block Ford engines, all hardware in each engine finishing kit is manufactured to precise OEM dimensions to make engine assembly easy.
Not Yet Reviewed
$38.71
When rebuilding your Ford engine, you'll want to use the proper expansion plugs for the job. Ford Performance Parts expansion plugs are designed as exact replacement for your factory and aftermarket blocks.
( 3 )
$13.99
On Sale
Crown Automotive engine block coolant plugs are manufactured from heavy-duty steel that meets OEM standards for proper stock replacement. These plugs install simply in the vehicle's factory location. Whether you're doing a quick flush or need a replacement fastener, Crown engine block coolant plugs will do trick!
Not Yet Reviewed
$2.99
—
$4.99
$2.69
—
$4.49
Dart SHP Special High Performance small block Chevy cast iron bare blocks are designed for high performance and heavy duty applications. These SPH blocks are an ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders and high performance marine enthusiasts. Key features of SHP small block Chevy bare blocks are: * Priority main oiling system * Siamese cylinder bores with extra-thick walls * Extra thick decks to ensure reliable head gasket seal * Blind head bolt holes (don't go through water jacket) * Scalloped water jacket walls for improved flow around cylinders for better cooling * Clearance for 3.75 in. stroke with steel rods * Splayed outer bolts on middle main bearing caps * Provisions for OE stock roller lifters and cams * All OE bolt holes starter, clutch ball, etc. * Uses 1981 to 1985 stock style oil pan and passenger side dipstick * Uses stocked stamped steel or plastic timing cover
( 20 )
$2,299.99
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$5,038.95
—
$5,565.20
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
The engineering team at World Products collaborated with leading Ford racers and professional engine builders and developed the Man O'War replacement blocks for the popular 351 small block. They are available in two deck heights, to ensure compatibility with all popular OEM and aftermarket cylinder head/intake manifold combinations. World Products' new Man O'War Ford blocks have been created utilizing contemporary CAD/CAM manufacturing technology, for more precisely-detailed blocks than were ever before possible through conventional foundry methods. And they're made to QS-9000 quality standards, the highest in the industry.
( 3 )
$4,571.32
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$19.95
—
$55.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
