Availability
Our Summit Racing™ brass freeze plugs were designed for marine use, but you landlocked guys will get a lot of use out of them, too. All of the necessary plugs are included.
( 102 )
$12.99
—
$30.99
Seal up the casting core holes in your engine block and heads with Melling freeze plugs. They're manufactured from a variety of quality materials—such as brass, steel, and stainless steel—and offered in different diameters and depths to fit your specific application. These expansion plugs help protect against cracks caused by the pressure of frozen coolant and in regular operation will ensure that all vital fluids stay in the engine, where they belong. They are available for a wide range of makes and models, and can be ordered individually or in a multi-piece kit.
( 165 )
$0.50
—
$27.99
Avoid corrosion in your engine and replace your rusty freeze plugs with Proform's durable brass freeze plug kits. All of the necessary plugs are included for one complete engine block.
( 22 )
$18.99
—
$28.99
Whether you're looking for more power or simply trying to refresh the motor, there will come a time when you'll need Summit Racing Equipment® LS engine hardware kits. These kits include brass freeze plugs and main cap side bolts for your LS engines. Your rebuilt engine will not be complete without Summit Racing Equipment® LS engine hardware kits.
( 2 )
$57.78
On Sale
Mr. Gasket brass freeze plug kits eliminate any chance of rusted-out engine expansion plugs. Though they're designed for marine applications, these kits are ideal for long-term stored vehicles, as well as for everyday street use. The plugs guard your engine against freeze damage and cracks when there is insufficient antifreeze protection. Each kit includes all of the plugs needed for a complete (and specific) engine block—for applications from 1955 and up.
Not Yet Reviewed
$31.46
$28.31
—
$49.95
BTR engine coolant plugs are ideal replacements for your old engine block coolant drain plugs. They're available in large brass models for LS motors or small zinc plated models for Gen III/Gen IV LT motors. The expansion plugs are offered individually or in larger kits. Make engine coolant drainage easy again with the BTR engine coolant plug designed for your LS/LT engine application.
( 2 )
$6.49
—
$44.99
Protect your engine block with these Chevrolet Performance expansion plugs. Expansion plugs protect your engine block from freezes that can crack or permanently damage your expensive block. These plugs are made of brass and are designed to withstand thermal and corrosive effects under the hood of your car without failing. Don't risk expensive damage or deal with a leaky plug anymore--get these Chevrolet Performance expansion plugs.
( 4 )
$4.99
—
$6.99
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$19.95
—
$55.95
These Pioneer performance freeze plugs are designed by engine rebuilders, for engine rebuilders. Several types of freeze plugs are offered in a choice of materials and sizes for a large variety of applications.
( 42 )
$10.99
—
$259.99
Dart assembles these LS Next block hardware kits so you can easily obtain the major pieces when building your engine. These hardware kits include freeze plugs, camshaft bearings, dowels, and more. Build the engine of your dreams, from start to finish, with Dart LS Next block hardware kits.
Not Yet Reviewed
$172.88
—
$185.86
Melling engine expansion plug kits come with everything needed to replace the leaky "freeze" plugs on your current engine. When you have the motor out of the chassis, it's the ideal time to update the plugs before they start leaking. Order the kit recommended for your application—and stay ahead of the game with Melling!
( 12 )
$2.99
—
$32.99
Dorman expansion plugs are conveniently designed aftermarket replacements for stripped plugs. A leak-proof fit and long service life are assured every time, due to high-quality standards and materials used in the manufacturing process. Dorman engine and camshaft expansion plugs are offered in multiple sizes, styles, and materials for precise fitment on countless makes and models. They're easy to install and available individually or in multi-pack sets.
( 75 )
$20.99
—
$43.99
Durable steel freeze plugs from Dart work like expansion plugs. As we all know, water expands when it turns to ice, and if the coolant in your vehicle doesn't have enough antifreeze protection, it can freeze and then crack the engine block. Dart freeze plugs are designed to pop out under such conditions to relieve the pressure on the block, thus protecting it against freeze damage.
( 11 )
$1.71
—
$2.19
Clearance
Dorman engine expansion plugs are available to cover a range of applications. Each plug is constructed to strict engineering quality standards. Expansion plugs from Dorman are available in a complete kit or individually, dependent upon your needs.
( 2 )
$33.99
$20.50
COMP Cams have put together their engine plug kits because they understand it's easy to forget the little things. Ordering this one part number will supply you with all the plugs needed to seal the water and oil chambers in your LS engine. The plugs are made from brass and galvanized steel to resist corrosion, and will last for years without rusting or becoming stuck in your engine block. When building an LS engine, your primary focus is the major components—camshafts, cylinder heads, and like power makers. You don't want to overlooked the smaller, but also important, parts to complete your build. COMP Cams hasn't; pick up one of these engine plug kits and be ready to finish what you've started.
( 2 )
$49.95
ATK High Performance Engines offers GM 350 Vortec bare blocks with the following specifications: * Block: 100 percent new bare block with one-piece rear main seal * Bore: 4.000 in. (4.0003-4.0008 in. -- Pistons size vary, final honing may be required) * Maximum bore: 4.060 in. recommended * Displacement: 350 cu. in. * Main journal type: Chevy 350 * Engine block material: Premium iron alloy * Engine block style: Aftermarket, based off the Vortec 350 roller block * Engine block deck height: Standard deck * Engine oiling system: Priority main * Fuel pump boss: Yes * Main bolt style: 4-bolt * Main caps included: Yes * Main cap material: Cast iron * Main cap fasteners included: Yes * Main bearings included: No * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed * Roller camshaft compatible: Yes * Stroker clearanced: Yes, but the assembler must always check, as components differ
Not Yet Reviewed
$1,898.99
Go Fast Bits offers DV Plus Diverter Valves with TMS (Turbo Management System) Advantage for a wide range of vehicles, particularly imports. GFB's DV+ solution couldn't be simpler—keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?)—but the weak point is the valve mechanism itself. So GFB's DV+ solves this problem by replacing just the valve parts with an anodized billet aluminum housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum—plus either a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB's DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Order the model recommended for your vehicle. Additional notes: * Retains the factory solenoid coil for seamless integration * Replaces plastic valve parts with metal for reliability and strength on chipped engines * Exclusive "pilot-actuated" valve mechanism for rapid response at high boost
( 6 )
$166.50
Dart's LS Next2 cast iron bare engine block can elevate your LS Next platform with 9.240/9.450 deck heights, 4.000/4.125 bores, and billet steel main caps. Unleash unmatched strength with 1/2 in. main studs and compatibility for 8CW crankshafts and 1/2 in. head studs. Blocks come machined to accept fully counterweighted crankshafts. Additional details and specs: * Larger 4-bolt billet steel main caps * Priority main oiling system with two lifter crossovers and restrictor provisions * Siamesed cylinder bores with extra thick walls * Cylinder barrels extended .375 in. at the bottom * Extra thick decks ensure reliable head gasket seal * Blind 1/2' head bolt holes * Scalloped water jackets increase flow around cylinders for better cooling * Clearance for 4.100 in. stroke with steel rods * Clearanced for center counterweighted crankshafts * 1/2 in. main studs, with 4 splayed outer bolts on middle main bearing caps * LS style motor mounts * Provisions for OE stock roller lifter and cam * Uses stock timing covers and stock rear cover * All OE bolt holes for starter, water pump, etc. * Driver or passenger side starter mounts * Camshaft location: Standard * Freeze plug type: Brass press-in * Camshaft lifter bore: 0.842 IN * Main bearing type: Chevrolet LS * Main cap type: 4-bolt * Rear main seal type: LS * Engine type: ICE
Not Yet Reviewed
$6,505.39
ATK High Performance Chrysler Gen III Hemi remanufactured bare blocks are an economical option for your build! They're fully machined and ready to assemble. Here are product details: ATK 220A Engine Specs: * Block: Machined GEN III Hemi 5.7L (2004-2008) * Bore: 3.927 in. (Pistons size vary, final honing may be required) * Displacement: 345 cubic inch * Main journal type: Mopar GEN III Hemi * Engine block material: Cast iron * Engine block style: OEM * Engine block deck height: Standard deck * Main bolt style: 2-bolt * Main caps included: Yes * Main cap material: Powdered metal * Main cap fasteners included: Yes * Main bearings included: No * Camshaft bearings: Dura-Bond, installed and clocked to OEM position * Freeze plugs: Brass, installed and sealed * Oil galley plugs: Installed and sealed * Camshaft bearing line boring in Standard * Pos 1: 2.2921 in. – 2.2931 in. * Pos 2: 2.2765 in. – 2.2775 in. * Pos 3: 2.2607 in. – 2.2617 in. * Pos 4: 2.2449 in. – 2.2459 in. * Pos 5: 1.7187 in. – 1.7197 in. * Main, line honed: 2.7522 in. - 2.7525 in. * Cylinder honing I.D.: 3.9270 in. - 3.9278 in. * Minimum deck height: 7.880 in. - 7.870 in.
Not Yet Reviewed
$1,319.99
Dart SHP blocks are tailored to the most popular performance and racing applications. So, when you want more than stock blocks can provide, the strong reliable design and plentiful features of Dart SHP special high performance Ford engine blocks offer the perfect base foundation to start your build. Key features of SHP small block Ford bare blocks are: * Brand new precision machined cast iron block * Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to equalize temperatures * Priority main oiling system directs oil to the main bearings first for more dependable lubrication * Available with 302 (8.200 in.) deck height or 351 (9.500 in.) * Provisions for OE roller lifters, dog bones and spider * Siamese bores 4.000 in. or 4.125 in. (unfinished) with extra thick cylinder walls * Extra thick decks ensure reliable head gasket seal * Blind tapped head bolt holes to prevent water leaks * Steel 4-bolt main caps on #2, 3 and 4 with splayed outer bolts. (2-bolt main caps on #1 and 5) * Can use most stock components and accessories
( 4 )
$2,699.99
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 11 )
$2,549.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
