Engine Blocks & Parts | Summit Racing

Improved Racing Oil Cooler Adapters

Improved Racing oil cooler adapters have a low-profile for more header clearance. The adapters are machined from a single piece of billet aluminum and black anodized. For additional clearance with reliable sealing, they come with aluminum gaskets fitted with Viton® seals, and the adapter mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface. Select Improved Racing oil cooler adapters are also available with a built-in thermostat. Oil coolers help prevent the oil from getting too hot, but are also prone to lowering oil temperatures too much, especially in colder weather or during highway driving. The rebuildable thermostat speeds warm-up and helps reduce engine wear and horsepower losses by preventing oil temperatures from dropping below optimal levels. Features and benefits * 100 percent bolt-on solution; no fabrication, bending, or line modification is required * Viton® seals throughout for maximum reliability * Oil exiting the adapter is filtered oil * 6061 T-6 billet aluminum construction with black MIL-A-8625 Type II anodized finish * Standard female -8 AN O-ring boss threads for optional anodized adapter fittings in your choice of -8 AN, -10 AN, or -12AN lines * Depending on application, includes port(s) for oil sensors or turbo oil supply * Includes all necessary hardware * Limited lifetime warranty

4.2 out of 5 stars ( 10 )

$159.00

Philadelphia Racing Products AN Block Adapters

When using a remote-mounted water pump, you have to make the connection to the block. The easiest way to do that is with Philadelphia Racing Products AN block adapters. They're CNC-machined from 6061 billet aluminum and anodized for protection and appearance. Each adapter is O-ringed for a tight seal and includes stainless hardware.

Not Yet Reviewed

$58.99

—

$71.99

Allstar Performance Small Block Rear Main Seal Adapters

Allstar Performance small block rear main seal adapters can be used to convert 1986 and later blocks with a one-piece rear main seal to accept an older-style, 2-piece seal crankshaft. These are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. These rear main seal adapters are available in different applications and can be used with a one-piece or 2-piece oil pan, depending on your application. They are made from billet aluminum and include hardware.

4.5 out of 5 stars ( 8 )

$132.99

—

$199.99

On Sale

Moroso Rear Main Seal Adapter Kits

Moroso rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, 1-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation. The adapter kits include all mounting fasteners and required hardware.

4.63 out of 5 stars ( 8 )

$249.99

—

$279.99

$224.99

—

$251.99

Stef's Rear Main Seal Adapter Kits

Stef's rear main seal adapter kits are designed to install an early 2-piece style crankshaft into a late model, one-piece engine block. They are manufactured from billet aluminum and require no drilling or welding for installation.

4.0 out of 5 stars ( 2 )

$148.99

Canton Racing SBC Rear Main Seal Adapters

Canton Racing SBC rear main seal adapters convert your 1986 and later blocks with one-piece rear main seals to accept an older style 2-piece seal crankshaft. These adapters are essential when installing an early-style (1985 and earlier) crankshaft into 1986 and later blocks. When using these adapters, an oil pan for a 1985 and earlier block with a right side dipstick must be used. They are made from billet aluminum and hardware is included.

Not Yet Reviewed

$225.00

Engine Works Small Block Rear Main Seal Adapters

Engine Works small block rear main seal adapters convert 1986 and newer blocks with one-piece rear main seals to accept an older style 2-piece seal crankshaft. The adapter is needed when installing an early-style (pre-1986) crankshaft into1986 and newer block. They are made from billet aluminum and include hardware. Select the adapter needed for your application.

Not Yet Reviewed

$116.21

Derale LS Engine Oil Cooler Adapter Kits

Derale LS engine oil cooler adapters are designed to give a non-thermostatic option to consumers with high performance LS engines. They feature -10 ORB inlet/outlet ports for maximum oil flow and are rated to flow up to 20 gpm. The adapters include two 1/8 in. NPT ports that can be used for additional accessories and or sensors.

4.0 out of 5 stars ( 3 )

$102.36

—

$204.74

ICT Billet Main Seal Adapter Bolts

ICT Billet main seal adapter bolts are available for your LS engine. If your stock bolts have been misplaced during a rebuild or aren't looking reusable, ICT Billet can help.

Not Yet Reviewed

$20.99

Derale LS Engine Oil Cooler Block-off Adapters

Derale LS engine oil cooler block-off adapters can replace your stock GM adapter in order to furnish more 1/8 in. NPT ports. The two extra ports can be used for additional accessories and/or sensors. These block-off adapters are designed with an ultra-low profile to clear most header applications, and can withstand up to 200 psi.

Not Yet Reviewed

$64.35

Chevrolet Performance Bowtie Big Block Chevy Cast Iron Engine Blocks

Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.

4.83 out of 5 stars ( 6 )

$4,085.68

—

$4,291.31

Improved Racing Factory Oil Cooler Delete Kits

Improved Racing factory oil cooler delete kits remove the factory water-to-oil 'heater' so your vehicle can run with a more efficient air-to-oil cooling system. These kits come with everything needed to cap-off the radiator hose barb and water pump fittings from the factory setup. An oil cooler adapter (sold separately) is necessary to replace the factory water-to-oil cooler and allow for connecting an air-to-oil cooler. Please verify the fitment and order the Improved Racing factory oil cooler delete kit designed for your application.

Not Yet Reviewed

$14.90

ACDelco GM Genuine Parts Replacement Bolts

ACDelco GM Genuine Parts replacement bolts are available for a variety of applications, including transmission torque converter housings. Installing factory-recommended hardware helps to ensure the same performance, durability, and service life you expect from General Motors.

3.4 out of 5 stars ( 15 )

$3.99

Billet Specialties LS Valley Covers

Billet Specialties LS valley covers are engineered to fit LS2, LS3, LS7, and LSX blocks when using a carbureted intake manifold. They feature a ribbed design and are precision-machined from 6061 T6 aluminum and polished to a mirror finish to match other ribbed accessories. The covers include high-quality ARP 12-point hardware for the perfect finishing detail. The valley covers feature a provision machined into the back for the factory breather box and two 1/8 in. NPT ports for use with external breathers, oil separators, or catch cans. Designed for use with an OEM factory gasket (not included).

Not Yet Reviewed

$229.95